Test sets

The Polyamine Test Kit B42-C71 is a manual analysis set for determining polyamines in water. Application: Test kit for measuring the polyamine content in circulating water. Visibly determine polyamines in water The polyamine test kit is a titration set. With this test kit, you can directly check the polyamine content in water samples. All polyamine kits work with a pipette calibrated from 0 – 60 mg/l (resolution 1 mg/l). Test procedure Part 1 Pull the glass tube from the kit and fill it up to the graduation mark with the water sample. Add reagent C until the bottom is well covered (approx. 25 drops). Add 2 drops of reagent A and 2 drops of reagent B. Seal the glass tube with the screw cap and shake vigorously. Then wait until the solution in the glass tube separates into 2 layers. Bottom layer colorless: no polyamines present Bottom layer blue: polyamines present Part 2 (if the bottom layer is blue) Please read the instructions included with the test kit. Applications of the test kit Test kit for analyzing the polyamine content in circulating water.

The CCOH Polyamine Test Kit is used to determine the polyamine concentration in circulating water. This polyamine test kit is a titration set. The CCOH Polyamine Test Kit is a set for determining polyamines in water. The test kit for polyamine determination works according to the principle of titration. All polyamine test kits use a pipette calibrated in the range of 0 to 60 mg/l (resolution: 1 mg/l). If needed, a second pipette filling can be added, extending the measurement range up to 120 mg/l (K26). Visible measurement of polyamines in water A water sample is taken with the test kit, the appropriate reagents are added, and the color change is observed. Approximately 100 analyses can be performed at an average concentration of 30 mg/l, with a measurement time of about 3 minutes. Please read the enclosed instructions carefully. Features at a glance Manual determination of polyamine content without electronic devices Color change for simple and direct reading Fast results within a short time Compact all-in-one solution with reagents Analyses: approx. 100 (at an average content of 30 mg/l) Measurement time: approx. 3 minutes Resolution: 1 mg/l

The Polyamine Test Kit K 26 is a manual test set for determining polyamines in water. This polyamine test kit is a titration set. Color comparison for polyamines – simple and direct The test kit for polyamine determination works according to the principle of titration. With this test kit, you can visibly measure the polyamine levels in your water samples. All polyamine test kits use a pipette with a measurement range of 0–60 mg/l and a resolution of 1 mg/l. A second pipette filling can be added if needed, which corresponds to a measurement range of up to 120 mg/l for K26. Test procedure – Part 1 Remove the glass tube from the test kit and fill it with the water sample up to the graduation mark. Add reagent C until the bottom of the tube is completely covered (approx. 25 drops). Then add 2 drops of reagent A and 2 drops of reagent B. Seal the glass tube with the screw cap and shake vigorously. Then wait until the solution in the glass tube separates into two layers. Evaluation: Bottom layer colorless: no polyamines present Bottom layer blue: polyamines present Part 2 (if the bottom layer is blue) Please read the instructions included with the test kit. Properties and benefits Application: Test kit for measuring the polyamine content in circulating water Allows visible determination of polyamine content in water Fast and reliable results Analyses: approx. 100 (at an average content of 30 mg/l) Measurement time: approx. 3 minutes Resolution: 1 mg/l

The Polyamine Test Kit V 15/30 is a manual analysis set for determining polyamines in water. The polyamine test kit is based on a titration method. Visible results through color change Test kit for measuring the polyamine content in circulating water. A defined water sample is taken, reagents are added, and then the color reaction is observed. Please refer to the included instructions for how to perform the test. Various applications The set is particularly suitable for determining the polyamine content in circulating water (cooling circuits, process water, or industrial applications), where it is regularly necessary to check whether the polyamine level is within a defined range. Contents: 1x Polyamine Reagent A 1x Polyamine Reagent B 2x Polyamine Reagent C 1x Polyamine Titration Solution V15/V30 1x Glass tube with graduation mark and screw cap 1x Pipette All polyamine test kits use a pipette calibrated from 0–60 mg/l with a resolution of 1 mg/l.