Our flow cell kit is a simple and economical means of mounting pH and ORP electrodes for inline applications. Compatible with all 12 mm electrodes.
Our flow cell kit is a simple and economical means of mounting pH and ORP electrodes for inline applications. Compatible with all 12 mm electrodes.
JUMO 25 Meter Connection Cable JUMO 25 meter connection cable - Ideal for sensors, measuring devices or controllers with 4-wire connection This JUMO connection cable with a length of 25 meters is designed for the electrical connection of suitable sensors or measuring components to the connected evaluation unit. Thanks to the 4-wire design with additional shielding, it is particularly suitable for applications where reliable signal transmission must be ensured even over longer distances. Technical data Length: 25 meters Version: Connection cable Number of wires: 4-wire Additional feature: Shielded Advantages and special features of the JUMO connection cable A major advantage of this cable is its generous length. This is especially practical when a greater distance must be bridged between the sensor and the evaluation unit and a shorter standard cable is not sufficient. The shielded design supports secure and interference-free signal transmission, which can be an important factor in industrial or technical applications. Why should you choose this connection cable? This version is particularly useful when a suitable cable is required for longer installation distances. The combination of 25 meters in length, 4 wires and shielding makes it a practical solution for measuring points where reliable connectivity and clean cable routing are important. Especially in permanently installed applications, this can be a clear advantage. Such a cable is also useful in daily operation when sensors cannot be mounted directly near the evaluation or control technology. It provides greater flexibility in planning the measuring point and can help securely connect suitable components even over longer distances. Frequently Asked Questions What equipment can I use it with? Ideal for sensors, measuring instruments or control units with a 4-wire connection. Is the cable shielded? Yes, the cable has a shield that reduces interference. Is the cable easy to install? Yes, the cable is flexible enough for use in conduits, cable ducts or for open-lay installation. Is the cable robust enough for workshop or industrial use? Yes, it withstands normal wear and tear in protected environments. Is the cable available in other lengths? We currently offer 25-metre and 50-metre versions. How can I correctly identify the individual wires when connecting them? Each of the four wires is colour-coded; the instructions will help you with the connection.
JUMO 50 Meter Connection Cable JUMO 50 meter connection cable - Ideal for sensors, measuring devices or controllers with 4-wire connection This JUMO connection cable with a length of 50 meters is designed for the electrical connection of suitable sensors or measuring components to the connected evaluation unit. Thanks to the 4-wire design with additional shielding, it is particularly suitable for applications where reliable signal transmission must be ensured even over longer distances. Technical data Length: 50 meters Version: Connection cable Number of wires: 4-wire Additional feature: Shielded Advantages and special features of the JUMO connection cable A major advantage of this cable is its length. This is especially practical when a greater distance must be bridged between the sensor and the evaluation unit and shorter standard cables are not sufficient. The shielded design supports interference-free signal transmission, which can be an important factor in industrial and technical applications. Why should you choose this JUMO connection cable? This version is particularly useful when a suitable cable is required for longer installation distances. The combination of 50 meters in length, 4 wires and shielding makes it a practical solution for measuring points where reliable connectivity and clean cable routing are important. Especially in permanently installed applications, this offers greater flexibility during planning. Areas of application Such a cable is also useful in daily operation when sensors cannot be mounted directly near the evaluation or control technology. It provides greater flexibility when positioning the components and helps securely connect suitable devices even over longer distances. Anyone looking for a shielded connection cable with a length of 50 meters for suitable JUMO sensors or measuring components receives a practical solution for long connection paths and reliable signal transmission with this version. Frequently Asked Questions What equipment can I use it with? Ideal for sensors, measuring instruments or control units with a 4-wire connection. Is the cable shielded? Yes, the cable has a shield that reduces interference. Is the cable easy to install? Yes, the cable is flexible enough for use in conduits, cable ducts or for open-lay installation. Is the cable robust enough for workshop or industrial use? Yes, it withstands normal wear and tear in protected environments. Is the cable available in other lengths? We currently offer 25-metre and 50-metre versions. How can I correctly identify the individual wires when connecting them? Each of the four wires is colour-coded; the instructions will help you with the connection.
JUMO PVC T-piece DN32 incl. union nut, O-ring and adhesive socket JUMO PVC T-piece DN32 incl. union nut, O-ring and adhesive socket This JUMO PVC T-piece DN32 is the suitable accessory for installing a JUMO ecoLine CR-PVC 2-electrode conductivity sensor. It is supplied including a union nut, O-ring and adhesive socket and is available as a DN32 version. The JUMO T-piece DN32 is therefore a suitable accessory for selected ecoLine CR-PVC sensor variants. This version is particularly useful when the conductivity sensor needs to be integrated cleanly and practically into a suitable pipeline system. Thanks to the supplied mounting set, important components are already included, which simplifies installation and supports a maintenance-friendly installation solution. Especially in applications where the sensor must be cleaned regularly or removed for maintenance work, a suitable T-piece is a practical addition. This creates a suitable installation situation for the JUMO ecoLine CR-PVC 2-electrode conductivity sensor. Technical data Version: DN32 Material: PVC Scope of delivery: Union nut, O-ring, adhesive socket Suitable for: JUMO ecoLine CR-PVC 2-electrode conductivity sensor Why is this JUMO T-piece useful for the ecoLine? Anyone looking to integrate a suitable JUMO ecoLine CR-PVC conductivity sensor into a DN32 pipeline receives a practical and suitable installation solution with this T-piece. The complete scope of delivery simplifies installation and makes the accessory especially practical for new installations, retrofits or the replacement of existing components.
