In this adapter set are all parts included, that you need to install a Testomat® 808.   Connection set consisting of: plastic hose 6/4 x 1.5 m length   reduction 10 t0 6 mm   shutoff 3/8" to 6 mm Frequently asked questions What do I need the connection set for? For quick connection of your Testomat® 808 to the water supply. What is included in the set? A hose, a reducer, and a shut-off valve. Do I need to buy additional accessories? No, everything for the connection is already included. Is the installation complicated? No, the components are easy to connect and quickly assembled. Can I also use the set for an exchange? Yes, ideal for replacing old or defective connectors. What advantage do I have in everyday life? A quick, secure connection without having to search for the right parts. Is the set ready to use immediately? Yes, it can be used directly after connecting.

Contents:   1 x Screwdriver Torx TX10X80-3K 1 x screwdriver VDE-SZ-0,4X2,5X80 1 x water pump pliers 250MM  1 x flat round nose pliers 200MM

Candle filter housing complete for Testomat® 808 / Testomat 2000® / Testomat ECO®   candle filter with filter insert for filtering sample water before analysis max. pressure: 4 bar / 58 psi at 40°C (104°F), max. 10 bar / 145 psi at 20°C (68°F) max. temperature: 40°C / 104°F filter fineness: 100μm 1/4" inlet/outlet 1/8" drain with plug Frequently asked questions What do I need the candle filter for? It filters the sample water and protects the device from contamination. The candle filter is exclusively designed for filtering liquids. For which devices is the filter suitable? For Testomat® 808, Testomat 2000® and Testomat ECO®. Why is filtering water important? Clean water ensures more accurate measurement results and fewer disruptions. How finely does the candle filter filter? It retains particles up to a size of one hundred micrometers (100 µm). Do I need to change the filter regularly? Yes, the cartridge should be replaced if it becomes dirty. The filter insert should be changed at least once a year. Item number: 37584 Filter insert for candle filter Testomat 808. Is the installation complicated? No, the filter can be easily integrated into the pipeline. What advantage do I have in the operation? Less downtime and a longer lifespan for the device.

Connection set with ball valve, hoses and reducers for water connection. This connection set contains everything you need for quick connection of the Testomat 2000®, Testomat ECO®, EVO and Titromat® devices. Contents: 5 m PE 6/4x1 plastic pipe, blue 2 m drain hose, diameter = 12 mm 1 ball valve, PPSV 011223W 1 reducer connector, 10 to 6 mm 1 reducer nipple, 3/8‘-1/2’ Frequently asked questions What do I need the connection set for? For quick and complete connection of your device to the water supply. Does the set fit my Testomat or Titromat device? Yes, it is suitable for several models such as 2000®, ECO®, EVO, LAB, Limit and Titromat® devices. What is included in the set? Hoses, ball valve and matching connecting pieces for the water connection. Do I need to buy anything else? No, the set contains everything for direct connection. Is the installation complicated? No, the parts are coordinated with each other and easy to assemble. Can I also use the set for existing systems? Yes, ideal for retrofitting or replacing old connections. What advantage do I get with the set? You save time and avoid wrong purchases with perfectly matched components.

Frequently asked questions What do I need the conversion kit for the water inlet for? It allows you to connect a fabric hose to your device. Which devices is the conversion kit compatible with? The conversion kit for the water inlet to connect a fabric hose is suitable for Testomat® EVO TH-, Testomat 2000®, Testomat ECO®, and Titromat® devices. Is the connection complicated? No, thanks to the quick-release mechanism, everything can be connected quickly and easily. What advantage does the conversion kit offer in everyday life? It ensures a secure and flexible connection to the water inlet. Can I release the hose at any time? Yes, the quick release allows for easy attachment and removal. Is the conversion kit ready for immediate use? Yes, all the necessary parts are included and ready to use.

Recommended for Testomat® LAB instruments which are exposed to sunlight.

MEPUClip® pressure booster pump – buy online Reliable water supply for Testomat and Titromat devices The MEPUClip® pressure booster pump was specially developed for use in Testomat and Titromat devices and reliably ensures automatic filling of the measuring chamber system – even when the line pressure is too low or when suction is from open water systems. Whether in the laboratory, in water treatment or in industrial applications: with its robust design, durable technology and simple mounting on the top-hat rail, the MEPUClip® pump offers an efficient and safe solution for stable measuring processes. If you want to buy a low-maintenance and ready-to-use pressure booster pump, the MEPUClip® is the ideal choice. Areas of application for the MEPUClip® pressure booster pump This pressure booster pump is used wherever Testomat or Titromat devices require a stable water supply: Automatic filling of the measuring chamber system Use in environments with fluctuating or very low pipe pressure Measuring water intake from an open system The pump was designed for the Testomat 2000 and Titromat series and ensures precise and permanently reliable delivery of the measuring water. Advantages of the MEPUClip® pressure booster pump Ready for immediate use: factory-prepared – just connect and start Self-priming up to < 3 mWS Low maintenance for worry-free continuous operation Easy installation by snapping onto the top-hat rail Constant delivery rate of 0.6 l/min Robust construction for long operating times Optimised for Testomat and Titromat devices from Heyl Supports stable measuring conditions, even if the pressure in the water supply line is too low Important information for operation To ensure that the pump operates reliably, the following points should be taken into account: Keep the suction line as short as possible Extend flushing times if necessary Always check connections for leaks Keep hose lines clean Maintenance information The MEPUClip® is generally low-maintenance. Nevertheless, it is advisable to check the following regularly: Tightness of hose connections, screw connections, etc. Contamination in the hose lines This ensures that the delivery rate remains stable and the measurement quality is guaranteed throughout the entire operating time. Installation – quick and easy Installation is quick and easy: simply snap the MEPUClip® pressure booster pump onto the top-hat rail in the device – done. Why MEPUClip® – order online here? If you want to buy a powerful, durable and ready-to-use pressure booster pump that is perfectly matched to Testomat and Titromat devices, the MEPUClip® offers maximum reliability and precise delivery quality. Ideal for environments where the water supply pressure is too low or the sample water has to be drawn from an open system. Order the original spare part from Heyl directly from our online shop and benefit from fast availability, secure spare parts supply and reliable product quality. Get a 3% online shop discount on all Heyl items. Frequently asked questions When do I need the MEPUClip® booster pump? If the water pressure is too low or the measuring water does not flow in reliably. Does the pump fit my Testomat or Titromat device? Yes, it was developed specifically for these devices and is optimally adapted to them. Can the pump also suck up water on its own? Yes, it can independently suck water from open water systems. Is the installation complicated? No, just plug it into the hat rail, connect it and start right away. Do I need to regularly maintain the pump? Just occasionally check hoses and connections for cleanliness and tightness. What does the pump bring me in operation? It ensures even filling of the measuring chamber and stable measurement results. Is the pump ready to use immediately? Yes, it is prepared and can be used immediately after connection.

Frequently asked questions What is the runoff funnel needed for? He ensures that the water is clean and controlled when drained from the device. For which devices is the discharge funnel suitable? It fits with Testomat 2000 and ECO devices. Is the discharge chute a spare part? Yes, it serves as a complete replacement in case of wear or damage. Is the assembly complicated? No, the funnel can be easily replaced and inserted. Why should I regularly check the discharge funnel? So that the flow doesn't get clogged and the device can work reliably. What happens with a faulty runoff funnel? The water cannot drain properly and disruptions may occur. Is the discharge hopper delivered complete? Yes, it is a complete unit that can be used directly.

The pressure regulator is suitable for all Testomat® devices. It is used for pressures from 0.5 to 10 bar in order to avoid any pressure fluctuations that may occur and to ensure an optimum operating pressure. Kit consisting of: Pressure gauge, rear connection Bracket with nut 2 x straight screw-in fittings 1/4 ‘ x 6 mm  Technical data: max. inlet pressure: 25 bar Ambient temperature: 0-50 °C Pressure gauge connection G 1/4 Weight: 200 g  City water: approved Soft water: approved Demineralised water: not approved Condensate: not authorised Frequently asked questions What do I need the pressure regulator kit for? It ensures even water pressure and protects the device from water pressure fluctuations. Which devices is the kit suitable for? It fits all Testomat® devices. When should I use the pressure regulator? It is used at pressures of 0.5 to 10 bar to avoid any pressure fluctuations that may occur and to ensure an optimal operating pressure. What is included in the kit? A pressure gauge, retaining bracket with nut and 2 x straight 1/4" x 6 mm screw-in fittings. Can I easily read the pressure? Yes, the pressure gauge shows the current pressure at all times. Which types of water are the kits suitable for? For municipal water and soft water, not for drinking water or condensate. What advantage do I have in the operation? Constant pressure ensures reliable measurement results and protects the device.

Pressure regulator, complete for Testomat® 808Testomat® 808 / Testomat 2000® / Testomat ECO® The pressure regulator is used for pressures over 4 bar. - max. inlet pressure: 11 bar/159.5 psi - ambient temp.: 0-50 °C/32-122 °F - manometer connection: G1/8 - on both sides - non-reversible   Frequently asked questions What do I need the pressure regulator for? It reduces excessive water pressure and protects the device during operation. Which devices is the pressure regulator suitable for? For Testomat® 808, Testomat 2000® and Testomat ECO®. When should I use the pressure regulator? If the water pressure is too high or fluctuates greatly. What does the pressure regulator bring me in everyday life? It ensures stable conditions and reliable measurement results. Is the installation complicated? No, the pressure regulator can be easily installed in the line. What does "non-reversible" mean? The pressure is only regulated in one direction and is not automatically adjusted.

Dear customers, please note that the calibration of the Testomat® 808 SiO2 can only be carried out with silicate-free water. Therefore, please use the silicate filter cartridge specially developed for this purpose when replacing the double pump head (art. no. 40395) and the associated pump adjustment.The cartridge filled with the special resin is inserted into the sampling line of the unit before the inlet and removed again after the adjustment. The pump replacement instructions describe the use of the silicate filter, storage conditions and shelf life. After the first use, the filter can be used up to 10 times within one year for balancing. After one year, the filter must be disposed of. Frequently asked questions What do I need the silica filter cartridge for? The silicate filter is intended for the calibration of the Testomat® 808 SiO₂ after the pump head change. When is the cartridge inserted? During the exchange of the pump head and during the device calibration. Why is the cartridge necessary? It removes silicate from the water and prevents false measurement results. Where is the cartridge installed? Before entering the sampling line of the device. Can I reuse the cartridge? Yes, it can be used for multiple comparisons. The filter can be used up to ten times within a year for calibration after the first use (applies to SiO₂ concentrations of up to 1 mg/l. At higher concentrations, the usability of the filter is correspondingly reduced). The filter must be disposed of after one year. Do I have to have the cartridge permanently installed? No, it is only used for the comparison and then removed again. What should I consider when using it? Please read the operating instructions "Replacing the pump head on the Testomat® 808 SiO₂" carefully.

Testomat® aerator for reducing the CO2 content. Capacity: Max. water throughput of 12 l/h when reducing the free carbon dioxide from max. 200 mg/l to below 20 mg/l.   A high carbon dioxide content in the sample water distorts the measurement results. Therefore, insert the small aerator R upstream of the Testomat® device to reduce the CO2 content in the sample water.   Dimensions (W x H x D): 150 x 500 x 100 mm Supply voltage: 230 V/50 Hz.   Attention: The mounting of the Aerator R has to be 3 meters over the device!  

Contents: 1 x Screwdriver Torx 10x80-3K1 x screwdriver VDE slot 0,5x3x1001 x water pump pliers, infinitely variable1 x flat round nose pliers VDE L200MM1 x screwdriver Torx 8x60-3K1 x screwdriver Torx 9x60-3K1 x screwdriver VDE slot 0,5x3x100

Contents:  1 x Screwdriver VDE Slot 0,5x3x100  1 x Screwdriver VDE-PH-SLIM 1X80  1 x Screwdriver VDE-PH 0x60  1 x Screwdriver Torx 9x60-3K  1 x Screwdriver VDE Slot 0,4x2,5x80