Clack standard control piston (direct current) for WS1.00 and WS1.25 control valve The standard control piston for your Clack WS1.00 and WS1.25 valve The central moving element of the standard Clack WS1 and WS1.25 control valves is the Clack V3011 control piston. This piston, which comes as a complete assembly with all pre-installed seals, is the most important wearing part of the valve. It is designed for the standard regeneration method using the direct current process (downflow) and precisely controls all cycles from salting to rinsing. Position of the piston and its function The piston located in the control box is connected to the gearbox and the main gears, which are turned by the motor. The gears turn, causing the piston to move forward in a horizontal plane and come to a stop at specific points. The flow in the control valve is directed to a specific operation by moving the piston to different positions. The piston for clack control valves is cylindrical and can be operated at ultra-high pressure. The answer to the most common problems with valves The seals on the control piston are subject to natural wear and tear after thousands of regenerations and many years of operation. This is the most common cause of problems such as a continuous flow of water to the sewer, salty soft water after regeneration, or inefficient system performance. To eliminate internal leaks and restore full valve functionality, a professional and sustainable solution is to replace the entire piston assembly. Complete set for an easy overhaul This piston assembly is delivered as a ready-to-install unit with all critical seals and spacers already fitted. This guarantees simple and reliable repair without the tedious work of replacing small individual sealing rings. Overview Areas of application Complete refurbishment of Clack WS1.00 and WS1.25 control valves Solution for continuous water flow to the sewage system Repair of internal leaks and malfunctions Replacement of piston seals with a high degree of wear after extended service life Characteristics Manufacturer: Clack Corporation Specification: Complete main control piston assembly Function: For standard direct current regeneration (downflow) Material: High-strength, low-friction plastic with EPDM seals Compatibility: Suitable for Clack WS.001 and WS1.25 control valves Manufacturer product number: V3011

The standard control piston for your Clack WS1.00 KTW valve The central moving element of the standard Clack WS1 control valves is the Clack V3011-KTW control piston. This piston, which comes as a complete assembly with all pre-installed seals, is the most important wearing part of the valve. It is designed for the standard regeneration method using the direct current process (downflow) and precisely controls all cycles from salting to rinsing. Position of the piston and its function The piston located in the control box is connected to the gearbox and the main gears, which are turned by the motor. The gears turn, causing the piston to move forward in a horizontal plane and come to a stop at specific points. The flow in the control valve is directed to a specific operation by moving the piston to different positions. The piston for clack control valves is cylindrical and can be operated at ultra-high pressure. The answer to the most common problems with valves The seals on the control piston are subject to natural wear and tear after thousands of regenerations and many years of operation. This is the most common cause of problems such as a continuous flow of water to the sewer, salty soft water after regeneration, or inefficient system performance. To eliminate internal leaks and restore full valve functionality, a professional and sustainable solution is to replace the entire piston assembly. Complete set for an easy overhaul This piston assembly is supplied as a ready-to-install unit with all critical seals and spacers already fitted. This guarantees simple and reliable repair without the tedious work of replacing small individual sealing rings. Overview Areas of application General refurbishment of Clack WS1.00 KTW control valves Solution for a permanent water flow to the wastewater Repair of internal leaks and malfunctions Replacement of piston seals with a high degree of wear after extended service life Characteristics Manufacturer: Clack Corporation Specification: Complete main control piston assembly Function: For standard direct current regeneration (downflow) Material: High-strength, low-friction plastic with EPDM seals Compatibility: Suitable for Clack WS.001 KTW control valves Manufacturer product number: V3011-KTW

Clack seal and spacer set for WS 1.00, WS 1.25 and WS 1.50 The seal set for your Clack WS 1.00, WS 1.25 and WS 1.50 valves The Clack Seal and Spacer Kit V3005-02 is the second essential wear part kit required for a complete and sustainable overhaul of your control valve. The control piston is the moving part, while this kit forms the stationary ‘cylinder liner’ within the valve housing. These seals are critical for the precise separation of the various water pathways during regeneration. The ideal complement to piston replacement These seals, which are used in the valve housing, can harden, wear out or become damaged by dirt particles after prolonged use. This results in internal leaks, which cause the same symptoms as a worn piston: constant water flow to the waste water, reduced performance or salty soft water. To ensure a professional, permanent repair, it is strongly recommended that this seal kit V3005-02 also be replaced when replacing the control piston (e.g. V3011/V3177). Complete set for easy installation The seal kit is supplied as a pre-assembled unit with all sealing rings and spacers already arranged in the correct order. This enables easy and error-free push-in installation in the cylinder valve housing. Thanks to its high compatibility with the WS 1.00, WS 1.25 and WS 1.50 valve series, this kit is an indispensable standard spare part for any household with a water softener system equipped with a Clack valve. Areas of application Complete overhaul of Clack WS 1.00, WS 1.25 and WS 1.50 valves Elimination of internal leaks and continuous discharge to the sewage system When replacing the control piston, this component is usually also replaced Valve regains precise hydraulic control Characteristics Manufacturer: Clack Corporation Variant: Complete, stationary seal and spacer set Function: Seals the chambers in the main valve cylinder Material: High-quality EPDM seals and low-wear plastic spacers Compatibility: Universally compatible with Clack WS 1.00, WS 1.25 and WS 1.50 control valves Manufacturer's product number: V3005-02