Silicate measurement for industrial water treatment and medical technology
Silicate measurement is a decisive factor for industrial water treatment and for sensitive applications in the medical environment. By reliably monitoring the silicon dioxide (SiO₂) content in water, you can prevent scale formation, corrosion, process disruptions and unnecessary downtime. This protects your systems and reduces operating costs in the long term.
Why silicate measurement?
- Prevent hard, glassy deposits in boilers and turbines
- Protect against corrosion and high repair costs
- Ensure stable processes in RO and EDI systems
- Compliance with relevant standards in the medical sector (DGSV, AKI)
- Early fault diagnosis through continuous online monitoring
Buy silicate measuring devices and increase operational safety: Testomat® 808 SIO2
Typical areas of application
Silicate measurement in boiler and boiler systems
- Advantage: Protection of heat exchangers, turbines and steam generators. This is because silica/SiO₂ can form hard, sometimes glass-like deposits at high temperatures, which cause heat loss, corrosion and mechanical stress.
- Benefits: Fewer deposits, lower maintenance costs, longer service life, corrosion prevention, avoidance of expensive downtimes thanks to suitable cleaning and downtime strategies.
Buy silicate measuring devices for boiler systems now: Testomat® 808 SIO2
Power plant water treatment
- Advantage: Online silicate monitoring in the feed water circuit.
- Benefit: Minimized risk of scale, maximum operational reliability thanks to immediate detection of changes.
To the selection of online silicate analyzers: Testomat® 808 SIO2
Before and after reverse osmosis (RO) and EDI modules
- Benefit: Protection against fouling, clogging and membrane damage.
- Benefit: Stable processes, protection of your systems during longer system downtimes.
Discover silicate measurement for RO/EDI systems: Testomat® 808 SIO2
Industrial processes
- Advantage: Continuous measurement enables optimum process control.
- Benefit: Cost reduction through early detection of mixed bed exhaustion.
View process monitoring solutions now: Testomat® 808 SIO2
Medical environment (AEMP, outpatient care centers or similar with sterile processing)
- Advantage: Compliance with the limit values according to DGSV and AKI (<0.4 mg/l SiO₂).
- Benefit: Avoidance of deposits and damage to expensive medical technology.
Buy silicate measuring devices for the medical sector: Testomat® 808 SIO2
Your benefits with our silicate measuring devices
- High measuring accuracy for maximum process reliability
- Robust technology for industrial and medical applications
- Durable systems with simple integration
- Technical advice and spare parts service from experts
Why silicate measurement from Heyl is the right choice for your application
The silicate measuring device Testomat® 808 SiO₂ from Heyl stands for precision, reliability and practical solutions in industrial water treatment and the medical sector. Thanks to state-of-the-art measurement technology, you receive exact limit value measurements in real time at all times - a basic requirement for safe process control.
With Heyl, you are opting for:- Highest measuring accuracy to prevent deposits and corrosion damage
- Robust, durable systems, developed for demanding industrial and medical applications
- Continuous online monitoring that detects risks early and reduces costs
- Competent advice & support from technical experts
Whether in power plants, food production, RO/EDI systems or medical technology - Heyl offers the right solution for your requirements.
With professional silicate measurement from Heyl, you can safeguard your production processes, meet standards in the medical sector and avoid high follow-up costs due to downtime or corrosion.
Rely on Heyl silicate measurement - for maximum operational reliability, efficiency and investment protection.
Our Heyl silicate measuring devices
100 ml-bottles of original Testomat® 808 SIO2 Reagent Set A+B for monitoring the level of SiO2 in the water. The bottles of original Testomat® 808 SIO2 Reagent can be used immediately in the instrument without cumbersome filling and refilling. Measuring range: Silica SiO2: 0.3 - 1.2 ppm
Original Heyl Testomat 808 SiO₂ Reagent A – Reliable Silicate Measurement First reagent for Testomat 808 SiO₂ measurement The Testomat 808 SiO₂ Reagent A is used to measure the silicate content in water (SiO₂) and is one of the two necessary reagents for silicate measurement with the Testomat 808 Silicate system. SiO₂ Reagent A initiates photometric silicate determination in the Testomat® 808 SiO₂. The measurement range is 0.3–1.2 ppm SiO₂. Reagent A is precisely calibrated to the measurement method of the Testomat 808 Silicate and allows reliable silicate measurement in the range of 0.3 to 1.2 ppm SiO₂. It is ideal for use in RO process water treatment, e.g., in clinical environments. Using the original reagent ensures consistently precise results, which are essential for stable process monitoring. Heyl Original Indicator for Silicate Monitoring in RO Process Water Treatment Using original Heyl reagents ensures not only high measurement accuracy but also proper operation of the Testomat 808 SiO₂ and the retention of warranty and guarantee claims. It is ideal for clinical applications where reliable silicate monitoring is critical. For example, in sterilization of medical instruments, silicate monitoring in RO process water plays a key role in protecting and preserving medical devices.
Original Heyl Testomat 808 SiO₂ Reagent B for Silicate Determination Second reagent for silicate measurement with the Testomat 808 Silicate system The Testomat 808 SiO₂ Reagent B is the second required reagent for photometric measurement of silicate content (SiO₂) in water. SiO₂ Reagent B, together with Reagent A, completes the silicate determination using the Testomat® 808 SiO₂. The measurement range is 0.3–1.2 ppm SiO₂, enabling reliable and reproducible silicate analysis. Reagent B is precisely calibrated to the Testomat 808 Silicate measurement method and allows reliable determination of silicate within the 0.3–1.2 ppm SiO₂ range. Advantages of Using Original Reagent B for Testomat 808 SiO₂ by Heyl Using original Heyl reagents is essential for the proper operation of the Testomat 808 SiO₂ measuring device. It significantly contributes to process reliability, long device lifespan, and the retention of warranty and guarantee claims.
Contains: 2 x Sight glass windows 30x33 x Flat gasket 24x2 EPDM 601 x Bottle insert for screw cap and push-fit suction tube, 100 ml bottle1 x Bottle insert for screw cap and push-fit suction tube, 500 ml bottle1 x brushes set
Service set contains:2 x sight glasses 30 x 33 x flat gasket 24 x 21 x insert for screw cap & suction tube 100 ml bottle1 x insert for screw cap & suction tube 500 ml bottle1 x double pump head conversion kit1 x gear motor2 x Hose connector1 x Cleaning brush set Important: After replacement, the pump must be recalibrated in Testomat® 808 SiO2.The adjustment is available from firmware version T808_83-003. Carry out a firmware update for older versions before performing the adjustment! (Serial number less than 253.061)For this calibration, it is important that you use water with a silicate content of 0 ppm, otherwise the zero point calibration will be incorrect and lead to false measurement results.To ensure this, please use the silicate filter cartridge specially developed for this process for the T808 SiO2, article 270344.(For additional information and instructions on the equipment you need for the software update, please refer to the operating instructions. The instructions "Replacing the pump head on Testomat® 808 SiO2" are also available)
Contents: 1 x 37570 Solenoid valve complete Testomat® 808 2 x 37580 Insert with screw cap and suction tube 100ml bottle 1 x 37859 double pump head Testomat® 808 1 x 31972 SUB-D null modem cable, 9-pin, 2 x socket, 3m 4 x 37579 Insert with screw cap and suction tube 500ml bottle 2 x 40050 Magnetic stirring core 4 x 37538 Tube adapter Testomat® 808 4 x 40157 Angle screw-in connector, G1/8"-6 2 x 37543 Pipe, PE, D=6 d=4 L=53mm 2 x 37544 Pipe, PE, D=6 d=4 L=140mm 6 x 40170 Viewing window 30x3 6 x 31595 Fuse solder-in, TR5, T0,1A 6 x 31592 Fuse solder-in, TR5, T1,0A 6 x 31584 Fuse, solder-in, TR5, T0.2A 6 x 31585 fuse, T0,315A 8 x 33797 O-ring 3,68 x 1,78 8 x 31666 Fuse G-, 5x20mm, T4A 8 x 33777 Flat gasket 24x2 EPDM 70 4 x 33253 Screw M3x40, A2, DIN 965 8 x 33246 pan-head screw M3x12 DIN 7985H A2 8 x 11264 O-ring 4.5 x 1.5 8 x 11245 O-ring 1,78x1,78 1 x 32286 Adapter USB > Serial -length 1.1 meter 1 x 32287 Cleaning brush set 1 x 37498 USB stick with software tool for T808 and maintenance manual 2 x 37621 Dosing needle Testomat® 808 completeTranslated with www.DeepL.com/Translator (free version)