Piston direct current for WS1.00

Clack standard control piston (direct current) for WS1.00 and WS1.25 control valve

The standard control piston for your Clack WS1.00 and WS1.25 valve

The central moving element of the standard Clack WS1 and WS1.25 control valves is the Clack V3011 control piston. This piston, which comes as a complete assembly with all pre-installed seals, is the most important wearing part of the valve. It is designed for the standard regeneration method using the direct current process (downflow) and precisely controls all cycles from salting to rinsing.

Position of the piston and its function

The piston located in the control box is connected to the gearbox and the main gears, which are turned by the motor.

The gears turn, causing the piston to move forward in a horizontal plane and come to a stop at specific points.

The flow in the control valve is directed to a specific operation by moving the piston to different positions.

The piston for clack control valves is cylindrical and can be operated at ultra-high pressure.

The answer to the most common problems with valves

The seals on the control piston are subject to natural wear and tear after thousands of regenerations and many years of operation. This is the most common cause of problems such as a continuous flow of water to the sewer, salty soft water after regeneration, or inefficient system performance. To eliminate internal leaks and restore full valve functionality, a professional and sustainable solution is to replace the entire piston assembly.

Complete set for an easy overhaul

This piston assembly is delivered as a ready-to-install unit with all critical seals and spacers already fitted. This guarantees simple and reliable repair without the tedious work of replacing small individual sealing rings.

Overview

Areas of application

• Complete refurbishment of Clack WS1.00 and WS1.25 control valves
• Solution for continuous water flow to the sewage system
• Repair of internal leaks and malfunctions
• Replacement of piston seals with a high degree of wear after extended service life

Characteristics

• Manufacturer: Clack Corporation
• Specification: Complete main control piston assembly
• Function: For standard direct current regeneration (downflow)
• Material: High-strength, low-friction plastic with EPDM seals
• Compatibility: Suitable for Clack WS.001 and WS1.25 control valves

Manufacturer product number: V3011