Neomeris water softeners – effective solutions for your home

The Neomeris Water Softener 60 was developed for households with a maximum of 6 people and can soften up to 6,000 litres per regeneration cycle with an inlet water quality of 10°dH. The Neomeris Water Softener 60 uses ion exchange technology to partially replace the ‘hardness minerals’ calcium (Ca2+) and magnesium (Mg2+) with sodium ions (Na+). This removes the limescale and produces soft water. Product benefits at a glance: Structure of the Neomeris water softening system 60 The Neomeris Water Softening System 60 has a cabinet housing with a removable lid. Inside the cabinet is a GRP pressure bottle filled with high-quality ion exchange resin. The cabinet housing also serves as a container for regeneration salt for brine production (saline solution) and can hold up to 70 kg of salt. The system is completed by a Clack WS 1 CI water-controlled valve mounted on the GRP pressure bottle. The control valve has a microprocessor-controlled system that is easy to operate and uses five buttons for operation. The multifunctional display with status indicator supports metric and American units of measurement. CLACK WS 1 CI is made of a sturdy, modular material without screws, reinforced with fibreglass. Thanks to a click system, the front can be easily removed, allowing for simple maintenance. We set the CLACK WS 1 CI control valve to the factory default setting of ‘Delayed volume-controlled regeneration’ (volume control). Volume control with the Clack WS 1 CI valve The Clack WS 1 CI electronic water-controlled valve records soft water consumption using an integrated water meter. When the softened water flow reaches the preset volume, the regeneration phase does not start immediately, but only at night. To ensure that limescale-free water is still available even after the predefined water capacity has been reached, a reserve capacity is set up in advance as a safety factor. Ion exchange resin produces soft water Ion exchange resin is the main component of every water softening system. This resin contains sodium ions (Na+). When hard water (such as tap water) is passed through the resin, the calcium and magnesium ions (Ca2+ / Mg2+) contained in the water are exchanged with the sodium ions (Na+) adhering to the resin. The result is water with soft properties. The resin has a service life of over 20 years. Neomeris water softener 60 regenerates Once the exchange resin has exhausted its capacity and is completely saturated with calcium and magnesium ions (Ca2+ / Mg2+), the system regenerates itself using the salt tablets (saline solution) supplied. This regeneration takes place as follows: The ion exchanger must completely remove the calcium and magnesium ions (Ca2+ / Mg2+). To achieve this, the water softener automatically feeds a highly concentrated sodium chloride solution through the ion exchange resin. During this process, the resin is enriched with sodium ions (Na+) once again. Calcium and magnesium ions (Ca2+ / Mg2+) are discharged into the waste water together with the excess salt solution via a separate drain. Resin can now be used again to soften the tap water. During regeneration, the Neomeris water softening system 60 provides untreated tap water via a built-in bypass, ensuring a continuous water supply. Forced regeneration of the system If there is no activity, the system automatically enters a time-controlled, forced regeneration mode on the tenth day. This protects against the formation of germs in the resin bed. This forced regeneration is a safety regeneration that only takes place if no regeneration has occurred due to quantity control, for example during holidays. Reliably determine salt filling Depending on the hardness and consumption of the water, one salt refill can last for approximately 3 to 4 months. It is then necessary to add new salt. The cabinet housing is protected against overflowing water by an integrated safety float valve with a buoy. Option: Connection kit for cabinet-type water softener You can optionally order the matching connection kit for the cabinet-type water softener. This consists of: Double nipple (item no.: 882103) Connection fitting (item no.: 882068) 2 × 100 cm flexible hose, 1”, female thread on both ends for water softener inlet (item no.: 882069) Waste water hose (item no.: 882070) Hose clamp (item no.: 882071) ITP Multitri = free outlet (item no.: 882072) Duroval A (item no.: 400010)

The Neomeris Water Softener 80 is designed for households with up to 8 people and softens up to 8,000 litres per regeneration cycle with an inlet water quality of 10°dH. The Neomeris Water Softener 80 uses the ion exchange process to partially replace the ‘hardness minerals’ calcium (Ca2+) and magnesium (Mg2+) with sodium ions (Na+). This removes the limescale, resulting in soft water. Product benefits at a glance: Structure of the Neomeris water softening system 80 The Neomeris water softener 80 comprises a cabinet housing with a removable lid. The cabinet contains a GRP pressure vessel filled with high-quality ion exchange resin. The cabinet housing also serves as a container for regeneration salt for the production of brine (saline solution) and can hold up to 70 kg of salt. The system is completed by a Clack WS 1 CI water-controlled valve mounted on the GRP pressure bottle. The control valve has an easy-to-use microprocessor-controlled system with five buttons. The multifunction display with status indicator supports both metric and imperial units of measurement. CLACK WS 1 CI is made of sturdy, modular material without screws, reinforced with fibreglass. The front can be easily removed thanks to a click system, which makes maintenance simple. The CLACK WS 1 CI control valve is factory-set to ‘delayed volume-controlled regeneration’ (volume control). Controlling the quantity with the Clack WS 1 CI valve With a built-in water meter, the Clack WS 1 CI electronic water-volume-controlled valve determines the consumption of soft water. If the soft water flow reaches the preset volume, the regeneration phase does not begin immediately, but only at night. To ensure that lime-free water continues to be available after the preset water capacity has been reached, a reserve capacity is set in advance as a safety factor. Ion exchange resin ensures soft water The central element of every water softening system is the ion exchange resin. This resin contains sodium ions (Na+). When hard water (e.g. tap water) is passed through the resin, the calcium and magnesium ions (Ca2+ / Mg2+) contained in the water are exchanged with the sodium ions (Na+) adhering to the resin. The result is soft water. The resin has a service life of more than 20 years. Regeneration of the Neomeris water softening system 80 When the exchange resin has exhausted its capacity and is completely saturated with calcium and magnesium ions (Ca2+ / Mg2+), the system regenerates itself using the salt tablets (saline solution) that have been added. This regeneration takes place as follows: The calcium and magnesium ions (Ca2+ / Mg2+) must be completely removed from the ion exchange resin. To achieve this, the water softener automatically feeds a highly concentrated sodium chloride solution through the ion exchange resin. During this process, the resin is recharged with sodium ions (Na+). The calcium and magnesium ions (Ca2+ / Mg2+) are discharged into the waste water together with the excess salt solution via a separate drain. The resin can now be used again to soften tap water. During regeneration, the Neomeris water softening system provides 80 litres of untreated tap water via an integrated bypass, ensuring a continuous water supply. Forced regeneration in the absence The system's forced regeneration starts automatically on the 10th day of inactivity. This prevents germ formation in the resin bed. This forced regeneration is a safety regeneration that only takes place if no regeneration has occurred due to quantity control, such as during holidays. Reliably measure salt filling Depending on water hardness and consumption, one salt filling lasts for around 3 to 4 months. After this, new salt must be added. An integrated safety float valve with buoy protects the cabinet housing from overflowing water. Option: Connection kit for cabinet-type water softener You can optionally order the matching connection kit for the cabinet-type water softener. This consists of: Double nipple (item no.: 882103) Connection fitting (item no.: 882068) 2 × 100 cm flexible hose, 1”, female thread on both ends for water softener inlet (item no.: 882069) Waste water hose (item no.: 882070) Hose clamp (item no.: 882071) ITP Multitri = free outlet (item no.: 882072) Duroval A (item no.: 400010)

The Neomeris Water Softener 32, designed for households with 1 to 5 people, softens up to 3,200 litres of water per regeneration cycle with an inlet water quality of 10°dH. The Neomeris Water Softener 32 uses the ion exchange process, in which the ‘hardness minerals’ calcium (Ca2+) and magnesium (Mg2+) are partially replaced by sodium ions (Na+). This removes the limescale, resulting in soft water. Product benefits at a glance: Installation of the Neomeris Water Softener 32 The housing of the Neomeris Water Softener 32 is a cabinet housing with a removable lid. The cabinet contains a GRP pressure bottle filled with high-quality ion exchange resin. The cabinet housing also serves as a container for regeneration salt for the production of brine (saline solution) and can hold a maximum of 40 kg of salt. The GRP pressure bottle is equipped with a Clack WS 1 CI water-controlled valve, which completes the system. The control valve is equipped with an easy-to-use microprocessor-controlled control system that is operated via five buttons. The multi-function display with status indicator is compatible with metric and American units. CLACK WS 1 CI is made of fibre-reinforced plastic and offers a modular, robust material without screws. The front can be easily removed thanks to a click system, which makes maintenance simple. We set the CLACK WS 1 CI control valve to the factory default setting of ‘Delayed volume-controlled regeneration’ (volume control). Water volume control The Clack WS 1 CI valve, which operates electronically to control water volume, records soft water consumption using a built-in water meter. When the set volume of softened water has been used, the appliance does not immediately enter the regeneration phase, but only does so at night. As a safety factor, a reserve capacity is preset so that lime-free water continues to be available after the set water capacity has been reached. Soft water is produced by ion exchange resin The central element of every water softening system is the ion exchange resin. This resin contains sodium ions (Na+). When hard water (tap water) is passed through the resin, the calcium and magnesium ions (Ca2+ / Mg2+) contained in the water are exchanged with the sodium ions (Na+) that adhere to the resin. The result is soft water. The resin has a service life of more than 20 years. Neomeris water softener 32 regeneration When the capacity of the exchange resin is exhausted, i.e. when it is completely saturated with calcium and magnesium ions (Ca2+ / Mg2+), the system regenerates itself using the salt tablets (saline solution) inserted. Regeneration takes place as follows: The calcium and magnesium ions (Ca2+ / Mg2+) must be completely removed from the exchange resin. To achieve this, the water softener automatically feeds a highly concentrated sodium chloride solution (common salt) through the ion exchange resin. In this process, the resin is recharged with sodium ions (Na+). The calcium and magnesium ions (Ca2+ / Mg2+) are discharged into the waste water together with the excess salt solution via a separate drain. The resin can then be reused to soften the tap water again. During regeneration, the Neomeris water softening system supplies untreated tap water via an integrated bypass, ensuring a continuous water supply. Forced regeneration prevents system contamination Forced regeneration starts automatically on the tenth day of system inactivity. This prevents contamination in the resin bed. This forced regeneration is a form of safety regeneration and only takes place if no regeneration has occurred due to quantity control, for example during holidays. Salt filling of the water softener Depending on water hardness and consumption, one salt filling lasts for approximately 3 to 4 months; after that, new salt must be added. An integrated safety float valve with buoy protects the cabinet housing from flooding. Option: Connection kit for cabinet-type water softener You can optionally order the matching connection kit for the cabinet-type water softener. This consists of: Double nipple (item no.: 882103) Connection fitting (item no.: 882068) 2 × 100 cm flexible hose, 1”, female thread on both ends for water softener inlet (item no.: 882069) Waste water hose (item no.: 882070) Hose clamp (item no.: 882071) ITP Multitri = free outlet (item no.: 882072) Duroval A (item no.: 400010)