Neomeris water softener 80
€780.30*
Please log in to receive your conditions.
Available in 28 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "Neomeris water softener 80"
The Neomeris Water Softener 80 is designed for households with up to 8 people and softens up to 8,000 litres per regeneration cycle with an inlet water quality of 10°dH. The Neomeris Water Softener 80 uses the ion exchange process to partially replace the ‘hardness minerals’ calcium (Ca2+) and magnesium (Mg2+) with sodium ions (Na+). This removes the limescale, resulting in soft water.
Product benefits at a glance:
Structure of the Neomeris water softening system 80
The Neomeris water softener 80 comprises a cabinet housing with a removable lid. The cabinet contains a GRP pressure vessel filled with high-quality ion exchange resin. The cabinet housing also serves as a container for regeneration salt for the production of brine (saline solution) and can hold up to 70 kg of salt. The system is completed by a Clack WS 1 CI water-controlled valve mounted on the GRP pressure bottle. The control valve has an easy-to-use microprocessor-controlled system with five buttons. The multifunction display with status indicator supports both metric and imperial units of measurement. CLACK WS 1 CI is made of sturdy, modular material without screws, reinforced with fibreglass. The front can be easily removed thanks to a click system, which makes maintenance simple.
The CLACK WS 1 CI control valve is factory-set to ‘delayed volume-controlled regeneration’ (volume control).
Controlling the quantity with the Clack WS 1 CI valve
With a built-in water meter, the Clack WS 1 CI electronic water-volume-controlled valve determines the consumption of soft water. If the soft water flow reaches the preset volume, the regeneration phase does not begin immediately, but only at night. To ensure that lime-free water continues to be available after the preset water capacity has been reached, a reserve capacity is set in advance as a safety factor.
Ion exchange resin ensures soft water
The central element of every water softening system is the ion exchange resin. This resin contains sodium ions (Na+). When hard water (e.g. tap water) is passed through the resin, the calcium and magnesium ions (Ca2+ / Mg2+) contained in the water are exchanged with the sodium ions (Na+) adhering to the resin. The result is soft water. The resin has a service life of more than 20 years.
Regeneration of the Neomeris water softening system 80
When the exchange resin has exhausted its capacity and is completely saturated with calcium and magnesium ions (Ca2+ / Mg2+), the system regenerates itself using the salt tablets (saline solution) that have been added. This regeneration takes place as follows: The calcium and magnesium ions (Ca2+ / Mg2+) must be completely removed from the ion exchange resin. To achieve this, the water softener automatically feeds a highly concentrated sodium chloride solution through the ion exchange resin.
During this process, the resin is recharged with sodium ions (Na+). The calcium and magnesium ions (Ca2+ / Mg2+) are discharged into the waste water together with the excess salt solution via a separate drain. The resin can now be used again to soften tap water. During regeneration, the Neomeris water softening system provides 80 litres of untreated tap water via an integrated bypass, ensuring a continuous water supply.
Forced regeneration in the absence
The system's forced regeneration starts automatically on the 10th day of inactivity. This prevents germ formation in the resin bed. This forced regeneration is a safety regeneration that only takes place if no regeneration has occurred due to quantity control, such as during holidays.
Reliably measure salt filling
Depending on water hardness and consumption, one salt filling lasts for around 3 to 4 months. After this, new salt must be added. An integrated safety float valve with buoy protects the cabinet housing from overflowing water.
Option: Connection kit for cabinet-type water softener
You can optionally order the matching connection kit for the cabinet-type water softener. This consists of:
- Double nipple (item no.: 882103)
- Connection fitting (item no.: 882068)
- 2 × 100 cm flexible hose, 1”, female thread on both ends for water softener inlet (item no.: 882069)
- Waste water hose (item no.: 882070)
- Hose clamp (item no.: 882071)
- ITP Multitri = free outlet (item no.: 882072)
- Duroval A (item no.: 400010)
Frequently Asked Questions
Suitable for households of up to around 8 people.
It replaces hardness-causing minerals such as calcium and magnesium with sodium.
Yes, it significantly reduces limescale and protects appliances such as washing machines and kettles from deposits.
Many users report softer skin and hair that feels more pleasant thanks to the soft water.
You only need to top up the salt occasionally; the rest runs automatically in the background.
Yes, you save energy, protect your appliances and reduce the amount of cleaning required throughout the home.
With a bit of DIY skill, this is possible; alternatively, a specialist company or our service partners can help you with this.
Dimensions
| Height | 112 cm |
|---|---|
| Length | 50 cm |
| Width | 35 cm |
Other attributes
| Country of origin | DE |
|---|---|
| Customs tariff number | 84212100 |
| Parameter | Value |
|---|---|
| Application Area | Drinking water |
| Purpose | Reduction of water hardness |
| System capacity at 200 g salting | 80 m³ based on 1°dH |
| Salt consumption per 1°dH and 1 m³ | Factor 0.05 |
| System capacity at 120 g salting | 64 m³ based on 1°dH |
| Salt consumption per 1°dH and 1 m³ | Factor 0.0375 |
| Water consumption per regeneration | 6 bed volumes |
| System connection | 24V / 50 Hz / 10VA |
| Ambient temperature | +5 / +40°C |
| Water temperature | +5 / +30°C |
| Operating pressure min. / max. | 2 bar / 8 bar |
| Humidity | <60% |
| Operating material (salt) | DIN EN 973 (food grade) |
| Splash-proof | No |
| Interfering ions | Iron, manganese, chlorine |
| Component | Specification |
|---|---|
| Control Valve | Clack WS1.00CK ECO KTW (KTW-BWGL compliant) |
| Regeneration Type | Volume- or time-controlled, fully automatic |
| Salt Consumption per Regeneration |
Full brining: 1.6 / 2.5 / 4 kg Economy brining: 0.96 / 1.5 / 2.4 kg |
| Flow Rate | Up to 3.5 m³/h (at 1 bar pressure loss) |
| Capacity at 10°dH* | 3,200 / 5,000 / 8,000 liters |
| Regeneration | Demand-based, optimized for low salt and water consumption |
| Regeneration Duration | Approx. 60–90 minutes (depending on system configuration) |
| Resin Volume (optional) | e.g. 8 / 12.5 / 20 liters (model dependent) |
| Salt Tank | Integrated, cabinet design |
| Salt Capacity | Approx. 25–50 kg (depending on model size) |
| Operating Pressure | 2 – 6 bar |
| Operating Temperature | 5 – 30 °C |
| Max. Water Hardness | Up to approx. 40 °dH |
| Water Connection | 1" female thread |
| Drain Connection | DN 40 hose connection |
| Power Supply | 230 V / 50 Hz (control unit with power adapter) |
| Certification | KTW-BWGL compliant according to UBA (as of 2025) |
| Application Area | Single-family homes, offices, small commercial use |
| Dimensions (W×H×D) | e.g. 320 × 1100 × 500 mm (model dependent) |
| Weight (operational) | Approx. 40–60 kg (depending on configuration) |
Die örtlich bei Ihnen anliegende Wasserhärte können sie z.B. auf der Internetseite ihres Wasserversorgers einsehen. Wenn sie auf Nummer sicher gehen wollen, liefern wir Ihnen gerne auch das passende Wasserhärte-Testbesteck, damit sie ganz genau die Wasserhärte vor Ort bei Ihnen bestimmen können. Sie finden dieses bei uns im Shop unter Art.Nr. 400007 DUROVAL® 1 drop = 0.1 °dH Drop Count Titration Test. This test kit is already included in the complete set with item no. 400005 Water Hardness DUO Test Kit. Below you will find some sample calculations, for your reference, of the achievable volume of softened water for water hardness levels ranging from 3 °dH to 40 °dH.
Water softeners can be regenerated using either economy salting or full salting. With full salting, approximately 200 grams of salt are used per litre of softening resin for regeneration. With partial brining, however, only 120 grams are used. Regeneration using full brining fully restores the capacity. With partial brining, 80% of the softened water capacity is restored through regeneration, despite the significantly lower salt requirement. Based on your requirements, you can therefore determine the most suitable system for your needs.
| Water hardness (°dH) | Cabinet-type water softener 32 | Cabinet-type water softener 60 | Cabinet-type water softener 80 | |||
|---|---|---|---|---|---|---|
| 8 L Resin Full salting (L) | 8 L Resin Reduced-salt (L) | 12,5 L Resin Full salting (L) | 12,5 L Resin Reduced-salt (L) | 20 L Resin Full salting (L) | 20 L Resin Reduced-salt (L) | |
| 3 | 10.666 | 8.533 | 16.666 | 13.333 | 26.666 | 21.333 |
| 4 | 8.000 | 6.400 | 12.500 | 10.000 | 20.000 | 16.000 |
| 5 | 6.400 | 5.120 | 10.000 | 8.000 | 16.000 | 12.800 |
| 6 | 5.333 | 4.266 | 8.333 | 6.666 | 13.333 | 10.666 |
| 7 | 4.571 | 3.657 | 7.142 | 5.714 | 11.428 | 9.142 |
| 8 | 4.000 | 3.200 | 6.250 | 5.000 | 10.000 | 8.000 |
| 9 | 3.555 | 2.844 | 5.555 | 4.444 | 8.888 | 7.111 |
| 10 | 3.200 | 2.560 | 5.000 | 4.000 | 8.000 | 6.400 |
| 12 | 2.666 | 2.133 | 4.166 | 3.333 | 6.666 | 5.333 |
| 14 | 2.285 | 1.828 | 3.571 | 2.857 | 5.714 | 4.571 |
| 16 | 2.000 | 1.600 | 3.125 | 2.500 | 5.000 | 4.000 |
| 18 | 1.777 | 1.422 | 2.777 | 2.222 | 4.444 | 3.555 |
| 20 | 1.600 | 1.280 | 2.500 | 2.000 | 4.000 | 3.200 |
| 22 | 1.454 | 1.163 | 2.272 | 1.818 | 3.636 | 2.909 |
| 24 | 1.333 | 1.066 | 2.083 | 1.666 | 3.333 | 2.666 |
| 26 | 1.230 | 0.984 | 1.923 | 1.538 | 3.076 | 2.461 |
| 28 | 1.142 | 0.913 | 1.785 | 1.428 | 2.857 | 2.285 |
| 30 | 1.066 | 0.853 | 1.666 | 1.333 | 2.666 | 2.133 |
| 32 | 1.000 | 0.800 | 1.562 | 1.250 | 2.500 | 2.000 |
| 34 | 0.941 | 0.753 | 1.470 | 1.176 | 2.352 | 1.882 |
| 36 | 0.888 | 0.711 | 1.388 | 1.110 | 2.222 | 1.778 |
| 38 | 0.842 | 0.674 | 1.315 | 1.052 | 2.105 | 1.684 |
| 40 | 0.800 | 0.640 | 1.250 | 1.000 | 2.000 | 1.600 |
Note: To ensure the water softener operates in a hygienically sound manner, the ion-exchange resin must be regenerated regularly – even if little or no water has been used.
In accordance with DIN EN 806-5 and the requirements of DVGW Worksheet W 510:
The water softener must carry out a regeneration cycle at least every 72 hours (3 days), regardless of water consumption.
This so-called forced regeneration serves to prevent microbial contamination of the ion exchange resin and ensures the long-term hygienic safety of the system.
We recommend the following
Clack standard control piston (direct current) for WS1.00 and WS1.25 control valve The standard control piston for your Clack WS1.00 and WS1.25 valve The central moving element of the standard Clack WS1 and WS1.25 control valves is the Clack V3011 control piston. This piston, which comes as a complete assembly with all pre-installed seals, is the most important wearing part of the valve. It is designed for the standard regeneration method using the direct current process (downflow) and precisely controls all cycles from salting to rinsing. Position of the piston and its function The piston located in the control box is connected to the gearbox and the main gears, which are turned by the motor. The gears turn, causing the piston to move forward in a horizontal plane and come to a stop at specific points. The flow in the control valve is directed to a specific operation by moving the piston to different positions. The piston for clack control valves is cylindrical and can be operated at ultra-high pressure. The answer to the most common problems with valves The seals on the control piston are subject to natural wear and tear after thousands of regenerations and many years of operation. This is the most common cause of problems such as a continuous flow of water to the sewer, salty soft water after regeneration, or inefficient system performance. To eliminate internal leaks and restore full valve functionality, a professional and sustainable solution is to replace the entire piston assembly. Complete set for an easy overhaul This piston assembly is delivered as a ready-to-install unit with all critical seals and spacers already fitted. This guarantees simple and reliable repair without the tedious work of replacing small individual sealing rings. Overview Areas of application Complete refurbishment of Clack WS1.00 and WS1.25 control valves Solution for continuous water flow to the sewage system Repair of internal leaks and malfunctions Replacement of piston seals with a high degree of wear after extended service life Characteristics Manufacturer: Clack Corporation Specification: Complete main control piston assembly Function: For standard direct current regeneration (downflow) Material: High-strength, low-friction plastic with EPDM seals Compatibility: Suitable for Clack WS.001 and WS1.25 control valves Manufacturer product number: V3011 Frequently Asked Questions What is the control piston used for? It controls all cycles of the system, from brining to rinsing, and is therefore the valve’s main wear part. When should the piston be replaced? If there is a constant flow of water to the waste water, salty soft water after regeneration, or inefficient system performance. Is replacement complicated? No, the piston assembly is supplied ready for installation; all critical seals and spacers are pre-fitted. What material is the piston made of? High-strength, low-friction plastic with durable EPDM seals. What are the benefits of replacing it? Elimination of internal leaks, full functionality, extended system lifespan and reliable water softening.
Clack seal and spacer set for WS 1.00, WS 1.25 and WS 1.50 The seal set for your Clack WS 1.00, WS 1.25 and WS 1.50 valves The Clack Seal and Spacer Kit V3005-02 is the second essential wear part kit required for a complete and sustainable overhaul of your control valve. The control piston is the moving part, while this kit forms the stationary ‘cylinder liner’ within the valve housing. These seals are critical for the precise separation of the various water pathways during regeneration. The ideal complement to piston replacement These seals, which are used in the valve housing, can harden, wear out or become damaged by dirt particles after prolonged use. This results in internal leaks, which cause the same symptoms as a worn piston: constant water flow to the waste water, reduced performance or salty soft water. To ensure a professional, permanent repair, it is strongly recommended that this seal kit V3005-02 also be replaced when replacing the control piston (e.g. V3011/V3177). Complete set for easy installation The seal kit is supplied as a pre-assembled unit with all sealing rings and spacers already arranged in the correct order. This enables easy and error-free push-in installation in the cylinder valve housing. Thanks to its high compatibility with the WS 1.00, WS 1.25 and WS 1.50 valve series, this kit is an indispensable standard spare part for any household with a water softener system equipped with a Clack valve. Areas of application Complete overhaul of Clack WS 1.00, WS 1.25 and WS 1.50 valves Elimination of internal leaks and continuous discharge to the sewage system When replacing the control piston, this component is usually also replaced Valve regains precise hydraulic control Characteristics Manufacturer: Clack Corporation Variant: Complete, stationary seal and spacer set Function: Seals the chambers in the main valve cylinder Material: High-quality EPDM seals and low-wear plastic spacers Compatibility: Universally compatible with Clack WS 1.00, WS 1.25 and WS 1.50 control valves Manufacturer's product number: V3005-02 Frequently Asked Questions Why is the seal kit important for the valve? It keeps the water pathways separate and prevents water from mixing during regeneration. What problems arise if the kit is worn out? Leaks, unwanted water flow or reduced water softening efficiency. How does the kit make maintenance easier? It is supplied pre-assembled, so it can be fitted quickly and correctly into the valve housing. What compatibility does the kit offer? Fits all Clack WS 1.00, WS 1.25 and WS 1.50 valves. What material properties make the kit durable? EPDM seals resist wear, whilst plastic spacers ensure long-lasting stability. When is replacement strongly recommended? After prolonged use or if there are visible leaks in the valve body. Is there anything else that should be replaced when changing the seal kit? Yes, to ensure a proper, long-lasting repair, it is strongly recommended that you also replace this seal kit when replacing the control piston.
System separator with medium pressure zone Type BA – Series 580 Increase the integrity of your water supply with the Series 580 system separator – Type BA Protect your drinking water system effectively with the groundbreaking Series 580 backflow preventer. This sophisticated device is specifically designed to prevent backflow in water supply systems by creating a secure separation between clean drinking water and potentially contaminated water. Advanced materials and construction The 580 series is made of brass, which is not only durable and offers excellent corrosion resistance, but is also resistant to dezincification. Elements constructed with screw connections can be installed both horizontally and vertically. This ensures maximum application flexibility. Certifications that build trust This backflow preventer is certified according to EN 12729 and EN 1717 and has been approved by the DVGW, qualifying it for use in critical water supply systems. The recognised certificates prove that the 580 series meets all necessary safety standards and is a reliable solution for protecting drinking water. Areas of application and adaptability The 580 series is perfect for a variety of applications, from private to commercial to industrial installations. Its suitability for different installation orientations makes it the preferred choice for a wide range of requirements and spatial conditions. Easy maintenance and sustainable performance Thanks to its design, maintenance of this system separator is particularly easy for the user. Quick access to internal components reduces maintenance times and ensures consistently high performance and operational reliability. Choose the 580 series Use the advanced technology of the 580 series to ensure a safe and reliable water supply. Thanks to its excellent backflow protection, the quality of the water and the service life of your system can be improved. Investing in the 580 series offers you a robust, reliable and maintenance-friendly solution that meets your requirements for a safe water supply. Product description Type BA 580 series backflow preventers with a medium pressure zone have been specially developed for the safe separation of drinking water networks from non-drinking water sources. The screw-fixed connections on these devices allow for flexible installation in both horizontal and vertical orientations. Brass housing without dezincification, AG connections with union nut and dirt filter at the inlet, suitable for horizontal or vertical installation, EN 12729 certified, incl. maintenance booklet, PN 10, max. operating temperature 65 °C Technical details Temperature range: 0–65 °C Nominal pressure (PN): PN 10 Material: Dezincification-resistant brass DR Certifications: EN 12729, EN 1717 and DVGW Possible areas of application The 580 series backflow preventers are ideal for installations where reliable separation of drinking and non-drinking water is crucial. They are suitable for use in private households, commercial buildings and industrial facilities where they meet water quality and safety requirements. These backflow preventers are made of dezincification-resistant brass, which gives them long-term reliability and corrosion resistance and makes them particularly durable. Their DVGW certification proves that they meet the highest standards in terms of safety and performance. Use of water softening systems only in conjunction with a system separator In a water softening system, a system separator serves to protect the drinking water network from backflow of softened water or other substances from the system and to ensure the quality of the drinking water. The backflow preventer closes automatically when the pressure in the system changes. This prevents contaminated or altered water from entering the public drinking water network. Legal information The water softener is installed either centrally after the municipal water meter and the fine filter, or directly before the consumer or hot water supply in the hard water pipe. During installation, DIN EN 806, DIN EN 1717 and DIN 1988 as well as locally applicable regulations must be observed. A system separator must be installed before the water softening system in particular! Frequently Asked Questions Why is a system separator necessary for water softening? It prevents softened or contaminated water from flowing back into the drinking water supply. Which certifications confirm the safety of the device? EN 12729, EN 1717 and DVGW confirm the highest safety and quality standards. What material is the system separator made of? It is made of durable, dezincification-resistant brass that is corrosion-resistant. Can the system separator be installed horizontally or vertically? Yes, the screw connections allow for flexible installation positions depending on the installation requirements. For which applications is the 580 series suitable? For private households, commercial buildings and industrial facilities with a risk of backflow. How does the isolator respond to pressure changes in the system? It closes automatically to reliably prevent backflow of water.
The professional maintenance key for your Clack valves (WS1.00-WS1.50) The Clack maintenance key V3193-02 is an indispensable special tool for every system owner, installer and service technician. This durable tool made of high-strength plastic is precisely tailored to the dimensions of the large screw connections on Clack control valves. Its main function is to enable the plastic components to be tightened and loosened professionally and, above all, without damage. EASY TO USE: The spanner has been designed to enable quick and easy replacement of the filter cartridges. VERSATILE TOOL: The maintenance key (V3193-02) is used in water softeners and filter systems. This key can be used to remove and tighten pistons and to mount and dismantle nuts and fittings on valves. LONG-LASTING AND RELIABLE: The spanner is made from premium materials, is robust and can withstand the demands of regular use without any problems. EFFICIENT MAINTENANCE: Using the right spanner ensures that maintenance is carried out properly and your water softener is not damaged. This saves you time and money on repairs. Avoiding costly damage caused by unsuitable tools The most common cause of damage to the plastic parts of a control valve is the use of unsuitable tools such as pipe wrenches. This often results in scratched surfaces, deformed corners or even hairline cracks in the union nuts and covers, which can lead to leaks and costly repairs. With its precisely fitting shape, this spanner grips the designated ribs across their entire surface and transfers the force optimally without damaging the components. A tool for various activities This multifunctional key was developed for the most common service tasks on the WS1.00, WS1.25 and WS1.50 valve series. The large side of the wrench fits exactly onto the large union nut that secures the valve to the pressure tank. The smaller side is used to tighten and loosen the injector cover. This tool enables you to carry out essential maintenance work on your system professionally and safely. Overview: Areas of application Tightening and loosening the main union nut on the pressure tank in accordance with technical specifications Securely mounting and removing the injector cover Prevents damage to plastic screw connections Standard tool for plant owners, fitters and service technicians Features Manufacturer: Clack Corporation Variant: Multifunctional maintenance key/assembly tool Function: Working on valve screw connections without causing damage Material: High-strength, glass fibre reinforced plastic Compatibility: For Clack WS1.00, WS1.25 and WS1.50 control valves Frequently Asked Questions What is the maintenance key used for? For correctly tightening and loosening the plastic screw connections on Clack control valves and injector covers without causing damage. Which valves is the key suitable for? For Clack WS1.00, WS1.25 and WS1.50 control valves. What tasks can be carried out with it? Loosening/tightening the main union nut on the pressure tank, fitting and removing the injector cover, replacing the piston, and loosening/tightening the screw connections on Clack control valves. Why should no other tool be used? Pipe wrenches or unsuitable tools damage plastic parts, causing cracks and costly leaks. What material is the wrench made of? High-strength, glass-fibre-reinforced plastic for durable and reliable use. Is the wrench suitable for non-professionals? Yes, it is easy to use and specifically designed for quick, safe and professional maintenance. What are the advantages of the tool? Prevents damage, saves time and money during maintenance and repairs, and ensures professional installation.