JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-459-405-502-20-601-23/000  Input: 0 to 10 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Quickon  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter.  JUMO MIDAS – Intelligent Transmitters for Precise Analytical Data The JUMO MIDAS is a versatile transmitter and controller specifically designed for the precise evaluation of analytical sensors. It supports various measurement parameters such as pH, redox, conductivity, oxygen, and temperature, and offers flexible interfaces for integration into automation and process control systems. In the HeylNeomeris range, the MIDAS impresses with its compact design, intuitive operation, and extensive configuration options – ideal for demanding measurement and control tasks in water treatment, environmental analysis, and industry. Why we use the JUMO MIDAS: • Versatile use for numerous measurement parameters • Accurate and stable measurement results even during continuous operation • Modern communication interfaces for easy integration • User-friendly menu and flexible alarm management • Robust and reliable in industrial applications Example of a JUMO MIDAS model in the HeylNeomeris range: • JUMO MIDAS C08 – Transmitter for pH, redox, conductivity, and oxygen with multiple measurement channels (Item no.: 802091)

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-456-405-502-20-601-61/000  Input: 0 to 2,5 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-457-405-502-20-601-61/000  Input: 0 to 4 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-458-405-502-20-601-61/000  Input: 0 to 6 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-460-405-502-20-601-61/000  Input: 0 to 16 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-460-405-504-20-601-61/000  Input: 0 to 16 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/2 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-462-405-502-20-601-61/000  Input: 0 to 40 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-480-405-502-20-601-61/000  Input: -1 to 1,5 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-481-405-502-20-601-61/000  Input: -1 to 3 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-455-405-502-20-601-61/000  Input: 0 to 1,6 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-459-405-502-20-601-61/000  Input: 0 to 10 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter.