Control circuit board for TESTOMAT®2000
controller/filter receiver with hose for Testomat® devices: Testomat 2000®/ Testomat® EVO TH/ Testomat ECO®/ Titromat®
Conversion kit for 100 ml bottle For inserting 100 ml bottles instead of 500 ml bottles Technical data: 100 ml bottle insertion for screw top with suction pipe for 100 ml bottles screw top GL32
Umrüstsatz für den Wasserzulauf zum Anschluss eines Gewebeschlauches, geeignet für Testomat 2000®-, Testomat ECO®- und Titromat®-Geräte. Inhalt: Schnellverschlussstecker 1/4" Schnellverschlusskupplung 1/4" auf Schlauch di=6 mm Verriegelung auf der Schlauchseite
Conversion kit for converting the water connection from Testomat® BOB to Testomat® 808. Consisting of:1x Plug nipple G1/4" DN61x Pipe, PE, D=6 d=4 L=5m1x screw-in connector G1/4"-6
Cooler consists of Titanium steel 1.4571 for automatic sampling to 120°C hot water. Max.water pressure/hot water: 16 bar Max.water pressure/cold water: 8 bar Connections: Cold water inlet: ½ Cold water outlet (canal): ½ Hot water (in- and outlet): 8 mm Dimensions: 546 x 128 mm You can find a detailed description of the cooler in the technical data sheet for download on this page.
Cooler made of titanium stainless steel 1.4571 for the automatic extraction of water samples up to 200°C hot water. Technical data:Max. hot water pressure: 40 barMax. Cold water pressure: 8 barMax. Max. hot water temperature: 0-200°C Connections:Cooling water (inlet and outlet): ½ ”Hot water (inlet and outlet): 8 mm Dimensions:546 x 128 mm Weight:2.3 kg Length of the cooling coil:5.1 metri Material:Titanium stainless steel AISI316Ti4, EN 1.4571(Wall bracket: AISI316L, EN 1.4404) Performance (example for analyzers):< 40°C with cooling water at a temperature of <25°C at a water flow of the sample water of approx. 23 L/h Classification of the liquids: Class 2 - non-hazardous liquids Classification of the coolant Dir 2014/68 UE PED: Class A
Cooler consists of Titanium steel 1.4571 for automatic sampling to 80°C hot water. Max.water pressure/hot water: 16 bar Max.water pressure/cold water: 8 bar Connections: Cold water inlet: ½ Cold water outlet (canal): ½ Hot water (in- and outlet): 8 mm Dimensions: 598 x 335 mm You can find a detailed description of the cooler in the technical data sheet for download on this page.
Cooler consists of Titanium steel 1.4571 for manual sampling to 120°C hot water. Max.water pressure/hot water: 16 bar Max.water pressure/cold water: 8 bar Connections: Cold water inlet: ½ Cold water outlet (canal): ½ Hot water (in- and outlet): 8 mm Dimensions: 598 x 335 mm You can find a detailed description of the cooler in the technical data sheet for download on this page.
Cooler consists of Titanium steel 1.4571 for for manual sampling to 80°C hot water. Max.water pressure/hot water: 16 bar Max.water pressure/cold water: 8 bar Connections: Cold water inlet: 8 mm Cold water outlet: ½ Hot water (in- and outlet): 8 mm Dimensions: 413 x 335 mm You can find a detailed description of the cooler in the technical data sheet for download on this page.
The cover is a replacement part for the DosiClip. It serves as a splash guard for the DosiClip, which is installed in Testomat devices.
Plug-in card for a current interface, suitable for Testomat 2000® and Titromat® instruments. Technical Data output current: 0-20mA or 4-20mA maximum load: 500 Ohm galvanic isolation Usable in following devices: Testomat 2000®, Testomat 2000® CAL, Testomat 2000® CLF, Testomat 2000® CLT, Testomat 2000® CrVI, Testomat 2000® DUO, Testomat 2000® Fe, Testomat 2000® SO3, Testomat 2000® Self clean, Testomat 2000 THCL®, Testomat 2000® CLO2, Testomat 2000® Br2
The Porta Sens III is a mobile gas measuring device for carrying out regular leak checks in gas storage areas, near process plants, pipelines or in working areas. Features:Latest Smart SensorsInternal sample pump and external sample suctionNiMH D-cell battery or alkaline cellEasy to read LCD colour display with backlightDirect and time-controlled measurementVisual and audible alarmsInternal 4 GB data logger with USB outputTechnical data:Measuring range: depending on the sensor module usedDisplay: Backlit LCD color displayAccuracy: Sensor dependent, but generally ± 5% of value (limited by calibration gas) Sensitivity: Typically 0.1-1% of sensor module range Output: USB transmission of the stored measured value Memory: 4 GBStorage interval: programmable from 1 min to 60 minPower: Rechargeable NiMH D-cell battery or alkaline battery Operating temperature: -25 ° C to +55 ° CHumidity: 0-95% Non-condensingSize: 89 mm x 229 mm x 140 mmWeight: 3,2 kgDelivery in a case, consisting of:Mobile gas detector Porta Sens IIIReplacement filter10" Teflon lined sampling rodFlow meterUSB cablesReplacement NiMH D cell batteryChargerSensor holderCalibration "T" adjustment
Dosing needle for measuring chamber TESTOMAT®808
Spare part dosing pump DosiClip® incl. pressure and suction hose
Spare part dosing pump DosiClip® Vi (with Viton ring) incl. pressure and suction hose
Dosing pump PERIClip for Testomat® Polymer and PO4.Fitting:Set hose connection PERIClip Art.-Nr.: 40359Pump head PERIClip Art.-Nr.: 40362
ID=1.6mm complete2x screws M3x40, M3x501x shaft extension1x spacer plate1x double pump head with hoses1x hose extension1x 1.5 mm Allen keyImportant:After replacement, the pump must be recalibrated in Testomat® 808 SiO2. The adjustment is available from firmware version T808_83-003. Update the firmware of older versions before carrying out the adjustment! (serial numbers lower 253.061)It is important to use water with a silicate content of 0 ppm for this adjustment, otherwise the adjustment of the zero point is faulty and leads to incorrect measurement results. To ensure this, please use the silicate filter cartridge for the T808 SiO2, article 270344, specially developed for this process.(For additional information and notes on the equipment required for the software update, see the operating instructions as well as the "Replacing the pump head in Testomat808 SiO2" document)
Double valve holder, spare part for the Testomat LIMIT
Spare part for the Testomat® EVO TH (item no.: 100704)