Range:0.00 to 14.00 pH0.00 to 20.00 mS/cm 0.00 to 10.00 ppt 0.0 to 50.0 °C / 32.0 to 122.0 °FResolution:0.01 pH0.01 mS/cm / 0.01 ppt 0.1 °C / 0.1 °FAccuracy (@25°C)0.05 pH2% FS (EC/TDS0.5 °C / ±1 °FTDS factor0.45 to 1.00 (CONV)Temperature CompensationAutomatic, with ß=0.0 to 2.4%/°CCalibrationAutomatic, 1 point for EC and 1 or 2 points for pHProbereplaceable Environment0 to 50°C; 100% RH max.Battery Type4 x 1,5V; IEC LR44, A76Battery Life:Approx. 100 hours of useAuto-off:After 8 min. of non-useDimensions: 200 x dia 38 mmWeight: ca. 100 g
measuring range:0.00 to 14.00 pH0 to 3999 µS/cm 0 to 2000ppm0.0 to 50.0 °C / 32.0 to 122.0 °FResolution:0.01 pH1 uS/cm1 ppm 0.1 °C / 0.1 °FAccuracy (@25°C)0.05 pH2% FS (EC/TDS0.5 °C / ±1 °FTDS factor0.45 to 1.00 (CONV)Temperature CompensationAutomatic, with ß=0.0 to 2.4%/°CCalibrationAutomatic, 1 point for EC and 1 or 2 points for pHProbereplaceable Environment0 to 50°C; 100% RH max.Battery Type4 x 1,5V; IEC LR44, A76Battery Life:Approx. 100 hours of useAuto-off:After 8 min. of non-useDimensions: 200 x dia 38 mmWeight: ca. 100 g
Waterproof hand-held meter for fast pH/temperature measurement in liquids The Neomeris pH/T Pocket Tester is a waterproof hand-held meter for fast and accurate measurement of pH and temperature in liquids. The temperature sensor and pH electrode can be replaced with a new sensor or electrode when worn. Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power OFF saves battery power after non-use. The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.
Contents: 1 x Screwdriver Torx TX10X80-3K 1 x screwdriver VDE-SZ-0,4X2,5X80 1 x water pump pliers 250MM 1 x flat round nose pliers 200MM
Bolt M 3x40, A2 DIN 965 for Testomat® measuring chamber. Spare part for our devices Testomat 2000® / ECO®, Titromat® und 808.
Insert with screw cap and suction tube Tube olive 2.4mm and a 100 ml bottle for Testomat® 808
Insert with screw cap and suction tube Tube olive 2.4mm for 500 ml bottle for Testomat® 808
Insert with screw cap and suction tube Tube olive 3.5mm for 500 ml bottle for Testomat® 808 SiO2, Testomat 2000® PO4,Testomat 2000® Polymer as well as Testomat® LAB CL.
Silver oxide button cell battery 1.5V 23mAh, V377, spare part for the Testomat LIMIT
Candle filter housing complete for Testomat® 808 / Testomat 2000® / Testomat ECO® candle filter with filter insert for filtering sample water before analysis max. pressure: 4 bar / 58 psi at 40°C (104°F), max. 10 bar / 145 psi at 20°C (68°F) max. temperature: 40°C / 104°F filter fineness: 100μm 1/4" inlet/outlet 1/8" drain with plug
Spare part capillary, pressure, complete for DOSIClip®
Spare part Capillary, suction, complete for DOSIClip® pump
Spare part Measuring chamber holder without solenoid valve for:Testomat® 2000 / ECO / EVO TH / EVO TH CAL / LAB TH / LAB TH R
(stainless steel) for measuring chamber
The cleaning brush sets are equipped with a sun head so that you can clean the measuring chamber faster and more thoroughly. In addition, the brushes absorb the dirt better thanks to their dense bristles.[#dspacer#][#dspacer#]Consist:1x #895218 cleaning brush Ø 6mm1x #895219 cleaning brush Ø 16mm 1x #895220 cleaning brush Ø 20mm
Complete cover for the Testomat LIMIT
Complete water drainage for the Testomat LIMIT
with temperature sensorC=1Measuring range 10uS...200mSCable length 1 metre, BNC/Cinch
with temperature sensorC=1Measuring range 10uS...200mSCable length 5 metre, BNC/Cinch
Manufacturer article number: 50014413 (COND 51), Replacement electrode for Neomeris Professional conductivity/TDS/salinity/temp. pocket tester with exchangeable probe, IP67. Article no.: 880842
In diesem Anschluss-Set ist alles enthalten, was Sie für den schnellen Anschluss des Testomat 2000®- oder Titromat®-Gerätes benötigen. Inhalt: 5 m Kunststoffrohr PE 6/4x1,blau 2 m Ablaufschlauch di = 12 mm 1 Kugelhahn, PPSV 011223W 1 Reduzier-Verbinder 10 auf 6 mm 1 Reduziernippel 3/8"-1/2"
