This is a replacement part for the double-glazed measuring chamber (part number: 40559). Two flat gaskets are needed for the exchange.

The fuse GS-M 5X20 E 4A is a spare part for Testomat 2000® / ECO® and Titromat®.

The fuse T0,08 A is a spare part for Testomat 2000® / ECO® and Titromat®.

The Gasmaster III system is a stationary measuring instrument for continuous ozone measurement in the vicinity of ozone generators, residual ozone destroyers and ozone treatment plants.The measuring system consists of:Gasmaster evaluation unit in wall-mounted housing with display (art. no. 880532)Electrochemical detectors X- GARD for ozone (art. no. 880401)Technical data:Display: 0-1 ppm ozoneElectrical output: 4-20 mA or 1-5 VDCAlarm: 2 limit values, red LED ; Local error indication: yellow LED ; Relay contact 5ADigital output: RS485 ModbusDimensions (LxWxH): 288 x 278 x 110mmMains connection: 230 VAC, 50-60 Hz

Rubber balls Cal. 50, diameter 12.7mm for the Testomat LIMIT

The Testomat® LAB TH devices determines the water hardness (residual total hardness) fully automatically by use of titration and has been developed for monitoring the water quality of water treatment plants, drinking water plants, industrial boilers and for monitoring process water, here in a package for monitoring two measuring points. In view of the fact that the Testomat® LAB TH total water hardness analysers were developed for use in multi-parameter systems or for connection to a higher-level control system, we hereby offer you both Testomat® LAB TH analysis devices in combination with the NeoTecMaster®, which was specially developed by our company, as a complete solution at a preferential price. The 4-channel NeoTecMaster® multi-parameter controller included in this package enables the processing of up to four measurement signals in this version. A signal input on the NeoTecMaster® , in this case the RS232 interface and one additional RS232 interface on the included NeoTec Slave module , are used by both Testomat® LAB TH to display the measured values, the trend and the status messages on the 5 inch screen. In addition to the on board RS232 interface, the NeoTecMaster® also has a Modbus RTU input, which you can use freely after brief technical consultation with us. (Pre-check whether your existing measurement technology to be integrated requires adjustments). The NeoTecMaster® can be systematically supplemented with further optional NeoTec modules (function / signal converter modules) as required, thus enabling the future realisation of further control concepts in a flexible manner. A module that fundamentally expands the range of functions and is already included in the scope of delivery is our NeoTec slave relay module with which you can add potential-free relay contacts to the overall system. You can freely assign these to the incoming measurement signals and thus, for example, implement limit value-related control concepts, as well as output measurement-related messages. Further advantages of the NeoTecMaster:  Simple operation Integration of the Testomat® world of instruments, here in conjunction with two Testomat® LAB TH Integration into the existing control cabinet, alternatively we offer our NeoTecMaster® housing  Modular range of functions can be extended by NeoTec slave and signal converter modules (measurement, control, regulation) Available as built-in or surface-mounted variant Structured continuous data recording on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format In addition, there are proven Testomat® LAB functionalities:  Optimised water detection based on an optical measuring method  RS232 interface for transmission of measured values and error messages  Import and export of settings (basic programming)  Logging of measurement data and messages/alarms via integrated SD card or optionally usable SDHC card (2GByte)  Firmware update via SD card  Execution of parameterisation by means of SD card or "Service Monitor" software via mini-USB (on the unit side) to USB 2.0 (e.g. PC/notebook)  Multilingual software menu in German, English, French, Dutch, Portuguese  Integrated self-test with continuous monitoring  Automatic venting of the indicator line  Compact design Performance profil Testomat® LAB TH:  High-precision titration by means of piston metering pump  Reliable and low-maintenance operation  Minimal indicator and water consumption  Analogue output 4 - 20 mA for transmission of measured values  Programmable hardness unit in °dH, °f, ppm CaCO3, mmol/l  Collective alarm output  Indicator quantities: 500 ml bottles  Analysis trigger:  - Automatic interval operation (interval pause adjustable from 0-255 minutes)  - External analysis input (start/stop)  - Manual start Optional accessories available:  OLED display  Protective cover to increase the IP protection class of the Testomat® LAB TH devices  NeoTecMaster instrument cover

An adapter for the Testomat LIMIT plug connection

In this adapter set are all parts included, that you need to install a Testomat® 808.   Connection set consisting of: plastic hose 6/4 x 1.5 m length   reduction 10 t0 6 mm   shutoff 3/8" to 6 mm

Find everything you need for the water analysis in the boiler house in this Heyl analysis set: We offer individual versions, if you want a different composition.   Content of Analysis Case Boiler House:Titration sets: 1 Duroval A, 1 Duroval B, 1 Duroval CPM Testoval colour comparison kits: 1 sulphite, 1 phosphate test 1 pH tester pHep+ 1x 20ml buffer solution pH 4.01 in a sachet 2x 20ml buffer solution pH 7.01 in a sachet 1x 20ml electrode cleaning solution in a sachet 1 conductivity tester DiST 34x 20ml conductivity solution 1413 μS/cm in a sachet

Find everything you need for the water analysis in the boiler house in this Heyl analysis set: We offer individual versions, if you want a different composition.   Content of Analysis Case Boiler House:Titration sets: 1 Duroval A, 1 Duroval B, 1 Duroval CPM Testoval colour comparison kits: 1 sulphite, 1 phosphate test 1 pH tester pHep+ 1x 20ml buffer solution pH 4.01 in a sachet 2x 20ml buffer solution pH 7.01 in a sachet 1x 20ml electrode cleaning solution in a sachet 1 conductivity tester DiST 44x 20ml conductivity solution 12.880 μS/cm in a sachet

Angle screw-in connector for measuring chamber for Testomat 2000® / ECO®, LAB and Titromat®.

Testomat 2000®/ Testomat ECO®/ Testomat® EVO TH/Titromat®

The annual service set for your Testomat Limit is perfectly designed to ensure that you always have all the regularly replaceable components at hand. For reliable and regular maintenance. The set consists of: 1 x Flat seal 24x2 EPDM code number: 33777 1 x Sight glass with groove  code number: 40675 1 x Mirror disc for Testomat LIMIT  code number: 37517 1 x O-ring 18x2  code number: 33776 1 x Magnetic stirrer for measurement chamber recording  code number: 40050

Contains:  2 x Sight glass windows 30x33 x Flat gasket 24x2 EPDM 601 x Bottle insert for screw cap and push-fit suction tube, 100 ml bottle1 x Bottle insert for screw cap and push-fit suction tube, 500 ml bottle1 x brushes set

Annual Service Set Professional for Testomat® 808 Professional maintenance package for the annual care of your Testomat® 808 device The Annual Service Set Professional is designed for the regular and professional maintenance of your Testomat® 808. It includes all relevant wear parts that are recommended to be replaced annually. The set contains: 2 x Sight glasses 30 x 3 3 x Flat gasket 24 x 2 1 x Insert for screw cap and suction tube for 500 ml bottle 1 x Cleaning brush set Professional maintenance package for the annual care of the Testomat® 808 The Annual Service Set Professional for the Testomat® 808 has been specially assembled for the recommended annual maintenance of the device. It contains all relevant wear parts that should be replaced during the yearly service to ensure a permanently reliable measurement function. By planned replacement of these components, measurement deviations, malfunctions, and unplanned downtime can be avoided. The service set thus supports a stable and safe operation of the Testomat® 808 over the long term. Benefits of the Annual Service Set Professional for the Testomat® 808 The Annual Service Set enables structured and efficient maintenance, as all required spare parts are included in one package. Wear parts such as sight glasses, gaskets, and the insert for screw cap and suction tube can be replaced without additional spare part procurement. The included cleaning brush set allows thorough cleaning of the measurement chamber and helps maintain consistently high measurement accuracy. Overall, the service set supports economical, preventive maintenance and extends the service life of the Testomat® 808 device.

Contents:   1 x Screwdriver Torx TX10X80-3K 1 x screwdriver VDE-SZ-0,4X2,5X80 1 x water pump pliers 250MM  1 x flat round nose pliers 200MM

Bolt M 3x40, A2 DIN 965 for Testomat® measuring chamber. Spare part for our devices Testomat 2000® / ECO®, Titromat® und 808.

Insert with screw cap and suction tube Tube olive 2.4mm and a 100 ml bottle for Testomat® 808

Insert with screw cap and suction tube Tube olive 2.4mm for 500 ml bottle for Testomat® 808

Insert with screw cap and suction tube Tube olive 3.5mm for 500 ml bottle for Testomat® 808 SiO2, Testomat 2000® PO4,Testomat 2000® Polymer as well as Testomat® LAB CL.

Silver oxide button cell battery 1.5V 23mAh, V377, spare part for the Testomat LIMIT

Candle filter housing complete for Testomat® 808 / Testomat 2000® / Testomat ECO®   candle filter with filter insert for filtering sample water before analysis max. pressure: 4 bar / 58 psi at 40°C (104°F), max. 10 bar / 145 psi at 20°C (68°F) max. temperature: 40°C / 104°F filter fineness: 100μm 1/4" inlet/outlet 1/8" drain with plug