JUMO electrodes are specialized sensors / measuring devices used to measure various electrochemical quantities such as pH, redox potential and conductivity. These electrodes are crucial in water treatment as they provide precise and reliable measurements required for monitoring and controlling water quality.
Application / use in water treatment:
- pH value measurement: for monitoring and adjusting the pH value in drinking water, swimming pool water and process water.
- Redox potential measurement: To control the disinfectant concentration and to monitor oxidation and reduction processes.
- Conductivity measurement: To determine the ion concentration in the water, which indicates the purity and chemical composition of the water.
These electrodes are available in different versions to meet the specific requirements of each application.
JUMO sensors are high-precision measuring devices that are used to monitor and control various physical and chemical parameters in industrial processes.
Application / use of sensors in water treatment:
- pH sensors: Monitor and regulate the pH of water to ensure it remains within desired parameters.
- Conductivity sensors: Measure the concentration of ions in the water, which indicates its purity and chemical composition.
- Redox sensors: Monitor the redox potential to control the efficiency of disinfection processes.
- Temperature sensors: Monitor water temperature to ensure optimal conditions for various processes.
These sensors are able to provide precise and reliable data that is essential for the control and optimization of water treatment processes.
High-quality industrial electrodesProcess/industrial applicationswith gold tipdifferent insertion lengthsspecial types on requestSelected version:Basic type: JUMO tecLine redox combination electrode, PEI plastic with protective cageActive part: Platinum domeDiaphragm: 1x glass fiberElectrical connection to electrode: screw head Pg13.5 (S8)Fitting length: 120mm (standard)Extra codes: Salt reserve, double chamber KCI/KCIOrder code: 201025/72-22-05-22-120/837, 838
Room, outdoor and duct resistance thermometers Typ: 902520/21-573-1003-1/000 Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/21-573-1005-1/000 Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt1000 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/22-573-1003-1/000 Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/22-573-1005-1/000 Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt1000 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/22-474-1003-1/330,(-40..80°C) Measuring range from -40 to +80°C (Measuring range only in conjunction with transmitter) Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: 1x analog transmitter, 4-20 mA output (only in conjunction with 1xPt100 tw)(-40 to +80°C) Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/23-573-1003-1/000 Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/23-573-1005-1/000 Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt1000 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/23-474-1003-1/330,(-30..60°C) Measuring range from -40 to +80°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: 1x analog transmitter, output 4 to 20 mA (only in conjunction with 1x Pt100 zl) (-30 to 60°C) Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/23-474-1003-1/333,(-30..60°C) Measuring range from -40 to +80°C (Measuring range only in conjunction with transmitter) Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: 1x analog transmitter, output 0 to 10V (only in conjunction with 1x Pt100 zl)(-30 to +60°C) Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Typ: 902520/23-474-1003-1/330,(-40..80°C) Measuring range from -40 to +80°C (Measuring range only in conjunction with transmitter) Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: 1x analog transmitter, output 4 to 20 mA (only in conjunction with 1x Pt100 tw) (-40 to +80°C) Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Room, outdoor and duct resistance thermometers Measuring range from -40 to +80°C (Measuring range only in conjunction with transmitter) Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: 1x analog transmitter, output 0 to 10V (only in conjunction with 1x Pt100 tw) (-40 to +80°C) Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-378-1003-1-5,2-45-11-2500/000 Temperature measuring range: -50 ... +260 °C / Silicon Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 45 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: with bend protection, cable shielded Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-378-1003-1-6-50-11-2500/000 Temperature measuring range: -50 ... +180 °C / Silikon Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 50 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: without Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-378-1003-1-6-50-11-1500/000 Temperature measuring range: -50 ... +180 °C / Silikon Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 45 mm Cable length: 1500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: without Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-378-1001-1-6-50-11-2500/000 Temperature measuring range: -50 ... +180 °C / Silicon Measuring insert: 1x Pt 100 in three-wire circuit Installation length: 50 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: without Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-378-1003-1-6-60-11-2500/858 Temperature measuring range: -50 ... +180 °C / Silikon Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 60 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: Waterproof, protection class IP65 Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-402-1003-1-6-50-11-1500/317 Temperature measuring range: -50 ... +400 °C / Metal mesh Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 50 mm Cable length: 1500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: Connection cable shielded Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-724-1003-1-6-50-11-2500/000 Temperature measuring range: -5 ... +80 °C / PVC Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 50 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: without Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-724-1003-1-6-50-11-1500/000 Temperature measuring range: -5 ... +80 °C / PVC Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 50 mm Cable length: 1500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: without Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-730-1003-1-6-50-11-1500/000 Temperature measuring range: -5 ... +105 °C / PVC or PUR Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 50 mm Cable length: 1500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: without Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-730-1003-1-6-60-11-2500/858 Temperature measuring range: -5 ... +105 °C / PVC or PUR Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 60 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: Waterproof, protection class: IP65 Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-388-1003-1-6-50-11-2500/315,317 Temperature measuring range: -50 ... +260 °C / Metal mesh Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 50 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: with bend protection, cable shielded Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.
Push-in resistance thermometer with straight connection cable, stainless steel protection tube Type: 902150/10-388-1001-1-6-50-11-2500/315,317 Temperature measuring range: -50 ... +260 °C / Metal mesh Measuring insert: 1x Pt 100 in three-wire circuit Installation length: 50 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: with bend protection, cable shielded Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.