JUMO wall resistance thermometer with remote protection tube Protection class IP65
€121.50*
Please log in to receive your conditions.
Available in 28 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "JUMO wall resistance thermometer with remote protection tube Protection class IP65 "
Wall-Mounted Resistance Thermometer by JUMO with Pt100 and Analog Transmitter with 0 to 10 V and Measuring Range -40 to +80 °C
JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65
The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with direct voltage output. Equipped with Pt100 in a two-wire circuit, an integrated 0 to 10 V transmitter, and a measuring range of -40 to +80 °C, this version is suitable for wall-mounted measuring points where the temperature is measured at a point separated from the housing and transmitted directly as a voltage signal. For this purpose, the wall-mounted resistance thermometer is equipped with a remote protection tube. This makes the version particularly suitable for HVAC applications where direct integration into compatible control and regulation systems is required.
Technical Data
- Version: Wall-mounted resistance thermometer with remote protection tube
- Measuring insert: 1 x Pt100
- Circuit type: Two-wire circuit
- Transmitter: 1 x analog, output 0 to 10 V
- Measuring range: -40 to +80 °C
- Note: Measuring range only in combination with transmitter
- Protection class: IP65
Advantages and Technical Features of the Wall-Mounted Resistance Thermometer
- remote protection tube for more targeted temperature measurement
- direct 0 to 10 V signal for controllers and control systems
- well suited for wall-mounted measuring points with separated measuring locations
- IP65 protection class for increased housing protection requirements
- no additional external signal conversion required
The remote protection tube makes this version especially interesting when the measuring point should not be located directly at the housing. This allows the temperature to be measured closer to the actual measuring location while the housing remains mounted separately on the wall. This is especially practical for applications where the housing position and measuring location are not identical.
In addition, the version features an integrated 0 to 10 V transmitter. This means the temperature signal is available directly as a voltage signal and can be processed further without additional external signal conversion. Especially in building automation and HVAC applications, this is beneficial when controllers or control systems are designed for 0 to 10 V input signals. The associated measuring range is -40 to +80 °C and applies in combination with the transmitter.
Typical Applications
- Wall-mounted measuring points in HVAC applications
- Building automation
- Heating, ventilation, and air conditioning systems
- Measuring points with a slightly remote measuring location
Dimensions
| Height | 7 cm |
|---|---|
| Length | 5,2 cm |
| Width | 10 cm |
Weight
| Weight | 100 g |
|---|
Other attributes
| Country of origin | DE |
|---|---|
| Customs tariff number | 90251900 |
| Messeinsatz | 1x Pt 100 Zweileiterschaltung |
| Messumformer | Messumformer analog Ausgang 0-10 V |
| Temperaturbereich | -40°C ... +80°C |
| Toleranz / Klasse | Klasse B |
| Feature | Description |
|---|---|
| Connection housing |
Plastic housing made of PC (basic type 902520/11, material: PP),
degree of protection IP20 to IP65. Basic type 902524/25, degree of protection IP54 and IP65. |
| Protective tube | Stainless steel 1.4571; Ø 6 mm |
| Measuring insert |
Pt100 temperature sensor, DIN EN 60751, class B, two-wire circuit. Pt1000 temperature sensor, DIN EN 60751, class B, two-wire circuit. Further versions, see ordering information. |
| Transmitter | Analogue transmitter, output signal 4 to 20 mA or 0 to 10 V. |
| Characteristic | Output 4 to 20 mA | Output 0 to 10 V |
|---|---|---|
| Input | ||
| Measuring input | Pt100 (DIN EN 60751) | Pt100 (DIN EN 60751) |
| Sensor current | ≤0,5 mA | ≤0,5 mA |
| Measuring rate | Continuous measurement, due to analogue signal path. | Continuous measurement, due to analogue signal path. |
| Measuring circuit monitoring | ||
| Underrange (measuring range underrun) | decreasing down to ≤ 3,6 mA | 0 V |
| Overrange (measuring range overrun) | rising to ≥ 22 up to < 28 mA (typically 24 mA) |
rising to ≥ 11 up to < 14 V (typically 12 V) |
| Sensor short circuit | ≤ 3,6 mA | 0 V |
| Sensor and cable break | ≥ 22 to < 28 mA (typically 24 mA) | ≥ 11 to < 14 V (typically 12 V) |
| Output | ||
| Output signal | Pulsed direct current 4 to 20 mA | DC voltage 0 to 10 V |
| Transfer behaviour | temperature-linear | temperature-linear |
| Transmission accuracy | ≤ ±0,1 % | ≤ ±0,2 % |
| Attenuation of the residual ripple of a 24 V power supply, amplitude 10 V / 50 Hz, load 470 Ω / 10 MΩ load | 37 dB | 40 dB |
| Load (Rb) | Rb = (Ub - 7,5 V) ÷ 22 mA | - |
| Load effect | ≤ ±0,02 % / 100 Ωa | - |
| Load / Load Influence | - | ≥ 10 kΩ / ≤ ±0,1 % |
| Settling time after temperature change | ≤ 10 ms | ≤ 10 ms |
| Calibration conditions | DC 24 V / approx. 22 °C | DC 24 V / approx. 22 °C |
| Calibration accuracy | ≤ ±0,2 %a,b or ≤ ±0,2 K | ≤ ±0,2 %a,b or ≤ ±0,2 K |
| Overall sensor accuracy/Calibration | ±0,4 K (typical) at 20 °C / 24 V Power supply |
±0,4 K (typical) at 20 °C / 24 V Power supply |
| Power supply | ||
| Power supply (Ub) | DC 7,5 at 30 V | DC 15 at 30 V |
| Reverse polarity protection | yes | yes |
| Power supply influence | ≤ ±0,01 %/V Deviation from 24 Va | ≤ ±0,01 %/V Deviation from 24 Va |
| Environmental influences | ||
| Operating temperature range | -40 to +85 °C | -40 to +85 °C |
| Lagertemperaturbereich | -40 to +100 °C | -40 to +100 °C |
| Temperature influence | ≤ ±0,01 %/K deviation from 22 °C a | ≤ ±0,01 %/K deviation from 22 °C a |
| Climatic resistance similar to DIN EN 60654 class C1 |
relative humidity ≤ 95% annual average without condensation | relative humidity ≤ 95% annual average without condensation |
| EMC emissions and immunity | EN 61326 class B, industrial requirements | EN 61326 class B, industrial requirements |
a All specifications refer to the full-scale value of 20 mA.
b The higher value applies.
| Certification marks | Testing body | Certificate / test number | Basis for audit | Applies to |
|---|---|---|---|---|
|
SIL QUALIFIED PL QUALIFIED |
– | – | – |
Type suffix 058 in conjunction with the manufacturer's declaration |