Polyamine (PA) sind organische Verbindungen, die in vielen natürlichen und synthetischen Materialien vorkommen und eine wichtige Rolle in der Wasserbehandlung spielen. Polyamine sind in der Lage positiv geladene Ionen wie Ammonium, Phosphat und Nitrat aus dem Wasser zu entfernen, was sie zu effektiven Flockungsmitteln macht.
Polyamine werden oft in der Kreislaufwasserbehandlung eingesetzt, um das Wasser zu reinigen und zu entkalken. Kreislaufwasser ist Wasser, das in einem geschlossenen System zirkuliert, wie z.B. in Kühltürmen, wo es dazu dient, die Ausrüstung zu kühlen. Kreislaufwasser wird kontinuierlich recycelt, aber im Laufe der Zeit sammeln sich Mineralien und andere Stoffe an, die eine Bedrohung für die Ausrüstung darstellen können.
Durch Zugabe von Polyaminen werden diese Stoffe ausgefällt und können leicht entfernt werden. Polyamine sind auch in der Lage, Bakterien und andere Mikroorganismen abzutöten und können daher als Desinfektionsmittel eingesetzt werden.
Polyamine können aus verschiedenen Quellen stammen, wie z.B. aus natürlichen Materialien wie Pilzen und Bakterien oder aus der chemischen Synthese. Es ist wichtig, sicherzustellen, dass Polyamine in der Wasserbehandlung sicher und wirksam sind und dass sie den geltenden Standards und Vorschriften entsprechen.
The Polyamine Titration Solution CCOH + C Reagent Refill Pack contains replacement chemicals for polyamine titration measurements. Replacement reagent for polyamine titration – simply top up This refill pack contains Reagent C (1 x 50 ml C reagent) and the titration solution (1 x 50 ml CCOH). These reagents are required for the titration measurement of polyamines. Simply refill and carry on working Replacing the old solution with the fresh reagent is straightforward and takes just a few steps Compatible with all relevant polyamine titration kits Continues to enable reliable and comparable measurements Convenient for users who frequently need to perform titrations
Polyamine NI Reagents A + B Refill Pack The refill pack contains replacement chemicals for compatible polyamine test kits. Reagents for Your Polyamine Test – Easy Refilling When the reagents in your polyamine test kit are used up, there is no need to replace the entire set. The refill pack includes both required reagents, A and B, which are necessary for the color reaction during measurement. Simply replace the old chemicals with the new ones. The reagents are specifically matched to polyamine test kits, ensuring your measurements remain clear, consistent, and comparable. Cost-Effective and Sustainable The refill pack is particularly suitable for users who regularly use their test kit. There is no need to purchase a new set; simply replace the consumed reagents. Using the correct chemicals ensures that measurement results remain reliable and comparable over time. Note: The Polyamine NI refill pack (Reagents A + B) is universally compatible with all polyamine test kits.
The Polyamine Test Kit B42-C71 is a manual analysis set for determining polyamines in water. Application: Test kit for measuring the polyamine content in circulating water. Visibly determine polyamines in water The polyamine test kit is a titration set. With this test kit, you can directly check the polyamine content in water samples. All polyamine kits work with a pipette calibrated from 0 – 60 mg/l (resolution 1 mg/l). Test procedure Part 1 Pull the glass tube from the kit and fill it up to the graduation mark with the water sample. Add reagent C until the bottom is well covered (approx. 25 drops). Add 2 drops of reagent A and 2 drops of reagent B. Seal the glass tube with the screw cap and shake vigorously. Then wait until the solution in the glass tube separates into 2 layers. Bottom layer colorless: no polyamines present Bottom layer blue: polyamines present Part 2 (if the bottom layer is blue) Please read the instructions included with the test kit. Applications of the test kit Test kit for analyzing the polyamine content in circulating water.
The CCOH Polyamine Test Kit is used to determine the polyamine concentration in circulating water. This polyamine test kit is a titration set. The CCOH Polyamine Test Kit is a set for determining polyamines in water. The test kit for polyamine determination works according to the principle of titration. All polyamine test kits use a pipette calibrated in the range of 0 to 60 mg/l (resolution: 1 mg/l). If needed, a second pipette filling can be added, extending the measurement range up to 120 mg/l (K26). Visible measurement of polyamines in water A water sample is taken with the test kit, the appropriate reagents are added, and the color change is observed. Approximately 100 analyses can be performed at an average concentration of 30 mg/l, with a measurement time of about 3 minutes. Please read the enclosed instructions carefully. Features at a glance Manual determination of polyamine content without electronic devices Color change for simple and direct reading Fast results within a short time Compact all-in-one solution with reagents Analyses: approx. 100 (at an average content of 30 mg/l) Measurement time: approx. 3 minutes Resolution: 1 mg/l
The Polyamine Test Kit K 26 is a manual test set for determining polyamines in water. This polyamine test kit is a titration set. Color comparison for polyamines – simple and direct The test kit for polyamine determination works according to the principle of titration. With this test kit, you can visibly measure the polyamine levels in your water samples. All polyamine test kits use a pipette with a measurement range of 0–60 mg/l and a resolution of 1 mg/l. A second pipette filling can be added if needed, which corresponds to a measurement range of up to 120 mg/l for K26. Test procedure – Part 1 Remove the glass tube from the test kit and fill it with the water sample up to the graduation mark. Add reagent C until the bottom of the tube is completely covered (approx. 25 drops). Then add 2 drops of reagent A and 2 drops of reagent B. Seal the glass tube with the screw cap and shake vigorously. Then wait until the solution in the glass tube separates into two layers. Evaluation: Bottom layer colorless: no polyamines present Bottom layer blue: polyamines present Part 2 (if the bottom layer is blue) Please read the instructions included with the test kit. Properties and benefits Application: Test kit for measuring the polyamine content in circulating water Allows visible determination of polyamine content in water Fast and reliable results Analyses: approx. 100 (at an average content of 30 mg/l) Measurement time: approx. 3 minutes Resolution: 1 mg/l
The Polyamine Test Kit V 15/30 is a manual analysis set for determining polyamines in water. The polyamine test kit is based on a titration method. Visible results through color change Test kit for measuring the polyamine content in circulating water. A defined water sample is taken, reagents are added, and then the color reaction is observed. Please refer to the included instructions for how to perform the test. Various applications The set is particularly suitable for determining the polyamine content in circulating water (cooling circuits, process water, or industrial applications), where it is regularly necessary to check whether the polyamine level is within a defined range. Contents: 1x Polyamine Reagent A 1x Polyamine Reagent B 2x Polyamine Reagent C 1x Polyamine Titration Solution V15/V30 1x Glass tube with graduation mark and screw cap 1x Pipette All polyamine test kits use a pipette calibrated from 0–60 mg/l with a resolution of 1 mg/l.