Milwaukee Multiparameter Pocket Testers – Capture Multiple Measurement Values in Direct Comparison
Recognize Relationships in Water Instead of Viewing Individual Values in Isolation
Buy Milwaukee Multiparameter Hand Testers Online
Many water parameters directly influence one another. Only when several values are viewed together does a complete picture of the current situation emerge. This is exactly where Milwaukee multiparameter pocket testers are used.
They make it possible to measure different parameters simultaneously and compare them directly – without having to switch between multiple devices.
Measure Efficiently, Evaluate Faster
Especially during recurring inspections or at changing locations, combining multiple parameters in one device saves time and effort. Measurements can be carried out immediately and results compared directly.
Typical parameters that can be combined depending on the device include pH value, conductivity, or TDS. This allows changes within the system to be identified and assessed more quickly.
Typical Areas of Application
- Comparison and evaluation of multiple water parameters in one step
- Regular control measurements in changing environments
- Use for mobile analyses and on-site inspections
- Support in assessing complex water conditions
Your Benefits
- Combined measurement of multiple parameters in one device
- Direct comparison of measurement values without switching devices
- Time savings during regular inspections
- Flexible solution for mobile applications
This gives you an efficient way to capture multiple measurement values simultaneously and quickly recognize relationships within the water.
It is a microprocessor-controlled pH/temperature meter with extended measuring range (-2.00 to 16.00 pH), automatic temperature compensation, automatic calibration in 2 points and an accuracy of ± 0.02 pH.Design featuresFast, easy-to-read results with large digital LCD displayExtreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: simply insert the probe into the sample, stir gently and wait for the reading to stabiliseSimple push-button, automatic two-point calibration for increased accuracyDouble-junction, laboratory-grade gel-filled pH electrode for low maintenance and high performance, with screw cap for proper storageRobust stainless steel temperature probe3-foot probe cable for added testing flexibilityAutomatic shut-off and low power consumption for approx. 300 hours of continuous operation (battery included)
This Meter is a specialist food pH meter and probe combination specifically designed for the pH analysis of semi-solid foods such as processed meats, soft cheeses, soups, sauces, and sushi rice.AccuracyWith two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration.The MW102 meter has accuracy to ± 0.02 pH. 5x more accurate than some alternative meters.The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature.The temperature probe can also be used as a very accurate thermometer.Special features:- Fast easy to read results with large digital LCD readout- Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)- Lightweight and portable- Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize- Simple push button, automatic two-point calibration for increased accuracy- Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi solids with a screw on cap to ensure proper storage- Rugged stainless temperature probe- 3 feet probe cables for extra flexibility when testing- Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)
The MW105 MAX meter combines all the features of a benchtop meter in an IP67-rated portable meter.The units are equipped with a range of new diagnostic functions that improve the reliability of pH measurement:Waterproof IP67 housingExtended pH range: -2.00 to 20.00 pHUp to 3-point automatic pH calibration, 7 standard calibration buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45)alphanumeric LCD display for user-friendly, intuitive information, warning and error messagesautomatic switch-off function to conserve battery powerinternal clock and date for monitoring various time-dependent functions (calibration timestamp, calibration timeout)Special GLP button
The MW106 MAX meter combines all the features of a benchtop meter in an IP67 portable meter.The meter is equipped with a range of new diagnostic functions that improve the reliability of pH measurement.Hand carrying caseEach meter is supplied in a hard carrying case, ideal for on-site measurements.
The portable 4-in-1 MW306 PRO conductivity/TDS/NaCl (salinity)/temperature meter has won many fans worldwide with its reliable fast and easy operation. It is also very rugged and has IP67 waterproof rating. It has a user-friendly interface for data exchange and as mentioned at the beginning, it is designed to measure four different parameters of water. Ideal for use in hydroponics, horticulture, laboratories, food processing, water treatment and many other applications with demanding measurement requirements.
This 3-in-1 low range combination meter allows you to measure pH, EC (conductivity) and TDS with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1382 ppm calibration solution, a 9 V battery and instructions.
This 3-in-1 combination meter allows you to measure pH, EC high range (conductivity) and TDS high range with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1500 ppm calibration solution, a 9 V battery and instructions.
Das Milwaukee MW803 ist ein kompaktes, wasserdichtes All-in-One-Messgerät für pH, Leitfähigkeit, TDS und Temperatur. Speziell für Messungen im niedrigen Leitfähigkeitsbereich entwickelt, eignet es sich optimal für Hydroponik, Trinkwasseranalysen und Anwendungen mit geringer Salzkonzentration. Dank automatischer Temperaturkompensation, austauschbarer Sonde und einfacher Handhabung bietet der MW803 höchste Zuverlässigkeit auch im mobilen Einsatz.
Der Milwaukee MW804 kombiniert pH-, Leitfähigkeits-, TDS- und Temperaturmessungen in einem robusten, wasserdichten Gerät. Mit seinem hohen Messbereich ist er besonders für Anwendungen in der Landwirtschaft, oder Aquakultur geeignet. Die automatische Temperaturkompensation und die austauschbare Sonde gewährleisten präzise und langlebige Messungen – auch bei hohen Salz- oder Mineralgehalten.
This MW805 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from .40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852D/1 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutions. Gel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers
This High Range MW806 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from 0.40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutionsGel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers
Der Milwaukee PH58 ist ein vielseitiges, wasserdichtes Messgerät für pH, Redox (ORP) und Temperatur. Mit automatischer Temperaturkompensation und austauschbarer Sonde liefert er zuverlässige Ergebnisse in verschiedenen Anwendungen – von Aquakultur über Laboranalysen bis hin zu Umweltprüfungen. Die robuste Bauweise und die einfache Kalibrierung machen den PH58 zum idealen Begleiter für präzise Messungen im Alltag und im professionellen Bereich.