XS Instruments Multiparameter Pocket Testers – Capture Multiple Measurement Values in Direct Relation
Targeted selection of XS multiparameter pocket testers for complex applications
Order online now in the HeylNeomeris shop
In this category you will find pocket testers from XS Instruments for the simultaneous measurement of multiple water parameters. Instead of considering individual measurement values in isolation, these devices enable a combined analysis of various influencing factors.
Efficient analysis for demanding measurement tasks with XS multiparameter handheld testers
XS Instruments multiparameter pocket testers are particularly suitable for applications where several factors must be considered simultaneously. They support a structured evaluation of samples and simplify the interpretation of complex relationships.
Why measure multiple parameters together?
-
Recognize relationships instead of isolating single values
Many water parameters influence each other. Only the combination of several measurement values enables a complete understanding. -
Faster evaluation of changes
Deviations can be classified more quickly when several values are available simultaneously. This helps identify and assess causes more effectively. -
Efficiency in measurements and controls
Multiple parameters in one device reduce measurement effort. This saves time and simplifies regular inspections.
Typical areas of application
- Analysis of complex water and process conditions
- Comparison of multiple parameters in a single measurement process
- Use in laboratory and quality controls
- Environmental analysis
Your advantages in the HeylNeomeris shop
- Reliable results for evaluating complex relationships
- Compact devices for flexible applications
- Direct measurement of multiple parameters without changing devices
Benefit from an efficient measurement solution for the simultaneous determination of multiple water parameters and improve the evaluation of your measurement data.
Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The solutions matching the tester in the form of the 25ml sachets or 70ml bottles find space in the matching foam blank. Your analysis case consists of the following components: 1x pocket tester 1x conductivity calibration solution EC 12880 μS/cm (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 μS/cm (25ml bag or 70ml bottle) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67
IP Protection: IP67 With exchangeable probe Manufacturer article number: 50014213
The high quality XS Instruments portable multi-parameter meters of the Vio 7 and Vio 70 series with innovative high-resolution colour display are suitable for working in all conditions and offer easy handling through an integrated user-friendly operator guide in the form of the set-up and calibration mode. This allows the user to operate the instruments easily and intuitively. The XS Instruments meters feature automatic pH calibration with USA and NIST buffers with up to three points for pH and one point for ORP. The user is supported by intuitive symbols on the backlit screen, including display of the measurement stability (adjustable) and any errors. Another plus point is that the multi-parameter meter is supplied in a professional measuring case, which contains the selected measuring electrode, as well as the appropriate buffer solutions and instructions. Complementary advantages of the 70 Vio version: GLP functions: Date and time, recall of calibration data and "Calibration due" function Integrated data logger for up to 1000 data, automatic and manual PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software Automatic brightness control of the display (prolongs battery life) Only 6 keys for easy control of all functions of the unit 230V power supply unit Manufacturer article number: 50119012
IP Protection: IP67 With exchangeable combined probe Manufacturer article number: 50014253
Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The 25ml sachet or 70ml bottle solutions matching the tester can be accommodated in the foam blank. Your analysis case consists of the following components: 1x pocket tester 1x pH 4.01 buffer solution (25ml bag or 70ml bottle) 1x pH 7.00 buffer solution (25ml bag or 70ml bottle) 1x conductivity calibration solution EC 1413 µS/CM (25ml bag or 70ml bottle) 1x storage solution (25ml bag) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67
IP Protection: IP67 With exchangeable combined probe Manufacturer article number: 50014263
Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The 25ml sachet or 70ml bottle solutions matching the tester can be accommodated in the foam blank. Your analysis case consists of the following components: 1x pocket tester 1x pH 4.01 buffer solution (25ml sachet) 1x pH 7.00 buffer solution (25ml sachet or 70ml bottle) 1x conductivity calibration solution EC 1413 µS/CM (25ml sachet or 70ml bottle) 1x 475mV ORP solution (70ml bottle) 1x storage solution (25ml sachet) 2x batteries 1x lanyard for the pocket tester 1x pack of tissues You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67
IP Protection: IP67 With exchangeable combined probe Manufacturer article number: 50014293
This portable device accurately measures pH values (0.01 resolution) and ORP/redox potentials and, thanks to its IP67 protection, is also reliable for outdoor use. With automatic three-point pH calibration, flexible ORP calibration, temperature compensation and mV diagnostic function, it is extremely versatile. The large 3-colour display clearly shows measured values, calibration buffers, stability and temperature. Practical extras such as auto power-off and self-diagnostic messages make it particularly safe and user-friendly. IP protection class: IP67With replaceable probeManufacturer item number: 50014133
Dear customers, our handy pocket tester analysis case protects your handheld tester safely and also offers you space for the required calibration and buffer solutions. The pH buffer and storage solution matching the tester in the 25 ml sachet and the 70ml 475mV redox solution finds place in the foam blank. Your analysis case consists of the following components: 1x pocket tester 1x pH 4.01 buffer solution (25ml bag or 70ml bottle) 1x storage solution (25ml bag or 70ml bottle) 1x 475mV ORP solution in a 70ml bottle 2x batteries 1x lanyard for the pocket tester 1x pack of tissues You can also purchase the case separately to safely store your existing testers and always have the appropriate calibration and buffer solutions on site in the case. IP protection class: IP67
This compact measuring device combines pH and ORP/redox measurement in a robust, waterproof housing (IP67). With a resolution of 0.01 pH and mV, it offers maximum precision. The built-in microprocessor and replaceable combination electrode ensure reliable and long-lasting use. The three-colour LCD display clearly shows all important information: calibration buffers used, measurement stability, temperature and mV values. pH calibration is performed automatically at three points with five selectable US buffer values, while ORP calibration can be flexibly performed at a point specified by the user. In addition, the mV display can be used for both electrode diagnosis and redox measurement. For convenient operation, a temperature display, automatic temperature compensation (0–60 °C), an automatic switch-off function and clear self-diagnostic messages for low battery status or calibration errors are integrated. This makes the device ideal for precise laboratory and field applications. IP protection class: IP67 With interchangeable probeManufacturer item number: 50014173