Skip to main content Skip to search Skip to main navigation
Our service hotline – We are here for you 📞 +49 (0) 5121 7609 99

Product information "Analysis Case Boiler House"

Find everything you need for the water analysis in the boiler house in this Heyl analysis set:
We offer individual versions, if you want a different composition.
 
Content of Analysis Case Boiler House:
  • Titration sets: 1 Duroval A, 1 Duroval B, 1 Duroval CPM 
  • Testoval colour comparison kits: 1 sulphite, 1 phosphate test 
  • 1 pH tester pHep+ 
  • 1x 20ml buffer solution pH 4.01 in a sachet 
  • 2x 20ml buffer solution pH 7.01 in a sachet 
  • 1x 20ml electrode cleaning solution in a sachet 
  • 1 conductivity tester DiST 4
  • 4x 20ml conductivity solution 12.880 μS/cm in a sachet

Frequently Asked Questions

With the Heyl ‘Kesselhaus’ analysis kit, you have everything you need for your water analyses in the boiler house right at your fingertips.

It is a fully equipped mobile laboratory for essential water tests.

For example, pH, conductivity, sulphite and phosphate.

Yes, all essential equipment and solutions are already included.

For boiler water and boiler feed water in practical use.

Titration sets, test kits, and pH and conductivity meters.

You can carry out measurements flexibly, directly on site.

Technical specifications
DIST4:
Conductivity:
Measuring range: 0.00 to 20.00 mS/cm
Resolution: 0.01 mS/cm
Accuracy: ± 2% of the measuring range
Calibration: Automatic, one-point calibration at 12.88 mS/cm
Calibration solution: HI70030 12.88 mS/cm
Temperature:
Measuring range: 0.0 to 50.0°C
Resolution: 0.1°C
Accuracy: ± 0.5°C
Additional parameters:
Battery type: CR2032 Li-ion battery 3V, one piece
Battery life: ∅ 250 hours continuous use
Automatic switch-off: after 8 or 60 minutes of non-use, or deactivated
Ambient condition: 0 to 50°C; RH max. 100%
Dimensions / weight: 160 x 40 x17mm / 68g

pHep+:
pH:
Measuring range: 0.00 to 14.00 pH
Resolution: 0.01 pH
Accuracy: ± 0.10 pH
Calibration: Automatic, two-point calibration at pH 4.01 ; 7.01 or 10.01
Temperature:
Measuring range: 0.0 to 50.0°C (32.0 to 122.0°F)
Resolution: 0.1°C / 0.1°F
Accuracy: ± 0.5°C / ± 1.0°F
Additional parameters:
Battery type: CR2032 Li-ion battery 3V, one piece
Battery life: ∅ 800 hours of continuous use
Automatic switch-off: after 8 or 60 minutes of non-use, or deactivated
Ambient condition: 0 to 50°C; RH max. 100%
Dimensions / weight: 160 x 40 x17mm / 65g without battery