Skip to main content Skip to search Skip to main navigation

Analysis Case Boiler House

Article number: 851074
Our service hotline – We are here for you 📞 +49 (0) 5121 7609 99

Product information "Analysis Case Boiler House"

Find everything you need for the water analysis in the boiler house in this Heyl analysis set:
We offer individual versions, if you want a different composition.
 
Content of Analysis Case Boiler House:
  • Titration sets: 1 Duroval A, 1 Duroval B, 1 Duroval CPM 
  • Testoval colour comparison kits: 1 sulphite, 1 phosphate test 
  • 1 pH tester pHep+ 
  • 1x 20ml buffer solution pH 4.01 in a sachet 
  • 2x 20ml buffer solution pH 7.01 in a sachet 
  • 1x 20ml electrode cleaning solution in a sachet 
  • 1 conductivity tester DiST 3
  • 4x 20ml conductivity solution 1413 μS/cm in a sachet

Frequently Asked Questions

With the Heyl ‘Kesselhaus’ analysis kit, you have everything you need for your water analyses in the boiler house right at your fingertips.

It is a fully equipped mobile laboratory for essential water tests.

For example, pH, conductivity, sulphite and phosphate.

Yes, all essential equipment and solutions are already included.

For boiler water and boiler feed water in practical use.

Titration sets, test kits, and pH and conductivity meters.

You can carry out measurements flexibly, directly on site.

Dimensions

Height 11,5 cm
Length 38 cm
Width 31 cm

Weight

Weight 2,6 kg

Other attributes

Country of origin EU
Customs tariff number 38221900
Technical specifications
DIST3:
Conductivity:
Measuring range: 0.00 to 2000 µS/cm
Resolution: 1 µS/cm
Accuracy: ± 2% of the measuring range
Calibration: Automatic, one-point calibration at 1413 µS/cm
Calibration solution: HI70031 1413 µS/cm
Temperature:
Measuring range: 0.00 to 50.00°C
Resolution: 0.1°C
Accuracy: ± 0.5°C
Additional parameters:
Battery type: CR2032 Li-ion battery 3V, one piece
Battery life: ∅ 250 hours continuous use
Automatic switch-off: after 8 or 60 minutes of non-use, or deactivated
Ambient condition: 0 to 50°C; RH max. 100%
Dimensions / weight: 160 x 40 x17mm / 68g

pHep+:
pH:
Measuring range: 0.00 to 14.00 pH
Resolution: 0.01 pH
Accuracy: ± 0.10 pH
Calibration: Automatic, two-point calibration at pH 4.01 ; 7.01 or 10.01
Temperature:
Measuring range: 0.0 to 50.0°C (32.0 to 122.0°F)
Resolution: 0.1°C / 0.1°F
Accuracy: ± 0.5°C / ± 1.0°F
Additional parameters:
Battery type: CR2032 Li-ion battery 3V, one piece
Battery life: ∅ 800 hours of continuous use
Automatic switch-off: after 8 or 60 minutes of non-use, or deactivated
Ambient condition: 0 to 50°C; RH max. 100%
Dimensions / weight: 160 x 40 x17mm / 65g without battery