JUMO MIDAS C08

Article number: 802098

Our service hotline – We are here for you 📞 +49 (0) 5121 7609 99

Product information "JUMO MIDAS C08"

Pressure transmitter from JUMO for relative pressure 0 to 40 bar at the input and 4 – 20 mA output signal with G ¼ DIN EN 837 process connection

JUMO MIDAS C08 – OEM pressure transmitter Basic Type: 401002/000-462-405-502-20-601-61/000

This OEM pressure transmitter is designed for higher relative pressure ranges. With a 4–20 mA output, robust stainless steel construction, and high stability, it is suitable for industrial applications with increased pressure loads in mechanical engineering, hydraulics, and plant engineering.

The JUMO MIDAS C08 in the 40 bar version is designed for applications where significantly higher relative pressures must be measured reliably. This variant covers the range from 0 to 40 bar relative pressure and therefore extends the use of the MIDAS series towards higher-loaded pressure systems. The output signal is provided as 4 to 20 mA in a two-wire configuration and enables direct and interference-resistant integration into industrial control and evaluation systems.

Technical data

Input: 0 to 40 bar relative pressure
Output: 4 to 20 mA, two-wire
Process connection: G 1/4 DIN EN 837
Material of process connection: CrNi (stainless steel)
Material of seal: CrNi (stainless steel)
Electrical connection: Connector DIN EN 175301-803, Form A

Advantages and technical features of the JUMO pressure transmitter

Extended measuring range up to 40 bar for higher pressure applications
Stable long-term measurement due to < 0.2 % drift
Suitable for gaseous and liquid media
Robust industrial design with CrNi stainless steel
High vibration resistance (2.5× industrial standard)
Reliable under strong vibrations and dynamic loads

The signal acquisition is based on a ceramic sensor system designed for long-term stability and consistent signal quality. The specified long-term stability below 0.2 % ensures that reliable measurement values remain available even over extended operating periods without frequent recalibration.

Due to the extended measuring range, this variant is particularly suitable for applications in which higher system pressures occur or pressure peaks must be detected reliably. The pressure transmitter is designed for gaseous and liquid media and can therefore be used in various technical environments.

The temperature compensation range from -20 to +100 °C helps to ensure that the measurement values remain stable even under changing ambient conditions. This also makes the device suitable for applications with fluctuating thermal influences.

Mechanically, the design is intended for industrial requirements. The G 1/4 process connection according to DIN EN 837 ensures standardized and secure integration into existing systems. The wetted parts are made of CrNi stainless steel, supporting high resistance to industrial media.

Typical areas of application

Mechanical and plant engineering with higher operating pressures
Compressors and compressed air systems
Industrial hydraulic and pneumatic systems
Building technology with increased pressure requirements
Commercial vehicles and mobile hydraulics

Dimensions

Height	3,5 cm
Length	16,5 cm
Width	10,5 cm

Weight

Weight	10 g

Other attributes

Country of origin	DE
Customs tariff number	90262020
Eingangsdruck	0 bis 40 bar Relativdruck
Prozessanschluss Verschraubung	G 1/4

Downloads:

Technical data:

General

Reference conditions

DIN 16086 and DIN EN 60770

Sensor

Measuring principle

Permissible load changes

Thick film on ceramic body (piezoresistiv)

> 10 Millionen, 0 until 100 % Measuring range

Mounting position

Calibrationslage

any

Device standing vertically, process connection at the bottom

Measuring range and accuracy

Measuring range	Linearity % MSP^f	Accuracy at			Long-term stability % MSP per annum	Overload capability bar	Burst pressure bar
Measuring range	Linearity % MSP^f	20 °C^d % MSP	-10 to +85 °C^e % MSP	-20 to +100 °C^e % MSP	Long-term stability % MSP per annum	Overload capability bar	Burst pressure bar
0 to 1.6 bar relative pressure	0,25	0,5	0,65	1	0,2	6	12
0 to 2.5 bar relative pressure		0,5	0,65			6	12
0 to 4 bar relative pressure		0,35	0,5			12	25
0 to 6 bar relative pressure						12	25
0 to 10 bar relative pressure						20	38
0 to 16 bar relative pressure						50	75
0 to 25 bar relative pressure						50	75
0 to 40 bar relative pressure						120	200
0 to 60 bar relative pressure						120	200
-1 to +0.6 bar relative pressure		0,5	0,65			6	12
-1 to +1.5 bar relative pressure		0,5	0,65			6	12
-1 to +3 bar relative pressure		0,35	0,5			12	25
-1 to +5 bar relative pressure						12	25
-1 to +9 bar relative pressure						20	38
-1 to +15 bar relative pressure						50	75
-1 to +24 bar relative pressure						50	75

^a Linearity after limit point setting

^b Reference conditions EN 61298-1

^c All pressure transmitters are vacuum-proof.

^d Includes: linearity, hysteresis, repeatability, deviation from initial and full scale

^e Includes: linearity, hysteresis, repeatability, deviation of initial and full scale range, thermal influence on starting range and span

^f MSP = Span

Exit

Analog	Other outputs are available on request.
Current	4 to 20 mA, Two-wire
Voltage	DC 0,5 to 4,5 V, Three-wire, ratiometric 10 to 90 % of the power supply
	DC 0 to 10 V, Three-wire
	DC 1 bis 5 V, Three-wire
	DC 1 bis 6 V, Three-wire
Jump Response T90	£ 2 ms
Burde Current Voltage (Load connected against "0 V/S-")	RL £ (UB - 8 V) ÷ 0,02 A (W) at 4 to 20 mA, two-wire RL ³ 5 kW at DC 0.5 to 4.5 V, three-wire RL ³ 10 kW at DC 0 to 10 V, three-wire RL ³ 10 kW at DC 1 to 5 V, three-wire RL ³ 10 kW at DC 1 to 6 V, three-wire

Mechanical Properties

Materials
Process connection	Stainless Steel 304
Gasket 600 (internal)	EPDM
Gasket 601 (internal)	FKM, standard
Gasket 602 (internal)	CR
Gasket 604 (internal)	FFKM
Gasket 609 (internal)	NBR
Process connection G 1/4 (externa)	FKM
Sensor Case	Ceramics Al₂O₃ 96 % Stainless steel 304
fixed cable	PBT-GF30, PVC
QUICKON	PBT-GF30
Round plug M12 × 1	PBT-GF30, Edelstahl 303 L
Bayonet stecker	PBT-GF30
Electrical connector	PBT-GF30, PA, Silikon
Gewicht	70 g with process connection G 1/4

^a Pay attention to the resistance of the selected sealing material!

Environmental impact

Medium temperature with electrical connection
fixed cable	-20 to +125 °C
Round plugs M12 × 1	-20 to +125 °C
Bayonet stecker	-20 to +125 °C
Electrical connector	-20 to +125 °C
Ambient temperature with electrical connection
fixed cable	-20 to +100 °C limited operation at ambient temperature -30 °C; Use only stationary, Kabelbruchgefahr
Round plugs M12 × 1	-20 to +100 °C
Bayonet stecker	-20 to +100 °C
Electrical connector	-20 to +100 °C
Storage temperature with electrical connection
fixed cable	-30 to +100 °C
Round plugs M12 × 1	-40 to +100 °C
Bayonet stecker	-40 to +100 °C
Electrical connector	-40 to +100 °C
zulässige Luftfeuchtigkeit Betrieb Lagerung	100 % relative humidity incl. condensation on the outer shell of the device 90 % relative humidity without condensation
Permissible mechanical stress Vibration Resistance Shock Resistance	50 g at 10 to 2000 Hz, according to IEC 60068-2-6 50 g for 3 ms, 100 g for 2 ms, according to IEC 60068-2-27
electromagnetic compatibility (EMV) Emission Stability	nach EN 61326-2-3 Class Ba Industrial Requirement
Protection	after EN 60529
for electrical connection
fixed cable	IP67
QUICKON^b	IP67
Round plugs M12 × 1^c	IP67
Baonet steckerc	IP67
Cable boxec, ^d	IP65

^a The product is suitable for industrial use as well as for household and small businesses.

^b Connecting cable diameter minimum 3.5 mm, maximum 6 mm

^c The degree of protection can only be achieved with a suitable, mounted counterpart.

^d Connecting cable diameter minimum 6 mm, maximum 8 mm

Electric Dating

Power supply UB	Ripple: The voltage peaks must not exceed or fall below the specified values of the power supply!
4 to 20 mA, Two-wire	DC 8 to 30 V, Nominal power supply DC 24 V
DC 0,5 to 4,5 V, Three-wire	DC 3 to 5,25 V, Nominal power supply DC 5 V, ratiometric output 10 to 90 % of the power supply
DC 0 to 10 V, Three-wire	DC 11,5 to 30 V, Nominal power supply DC 24 V
DC 1 to 5 V, Three-wire	DC 8 to 30 V, Nominal power supply DC 24 V
DC 1 to 6 V, Three-wire	DC 8 to 30 V, Nominal power supply DC 24 V
Current consumption incl. load	£ 25 mA £ 3 mA £ 3 mA £ 3 mA £ 3 mA
4 to 20 mA, Two-wire
DC 0,5 to 4,5 V, Three-wire
DC 0 to 10 V, Three-wire
DC 1 to 5 V, Three-wire
DC 1 to 6 V, Three-wire
Reverse polarity protection	yes
Circuit Requirement	SELV The device must be supplied with an electrical circuit that meets the requirements for "energy-limited circuits" of EN 61010-1.

Approvals and test marks

EAC Testing Laboratory Certificates/Inspection Numbers Test Basis applies to:	«Промтехконтроль» ЕАЭС N RU Д-DE.PA01.В.80830/21 TR TS 020/2011 Typ 401002
UL
Checkpoint	Underwriter Laboratories
Certificates/Verification Numbers	E201387
Test basis	UL 61010-1 (3. Ed.), CAN/CSA-22.2 No. 61010-1 (3. Ed.)
applies to:	Type Suffix 061