NeoTec Select Optical Stainless Steel Oxygen Sensor with Modbus Output 12 VDC, 316L, 10 Meter Cable

Product number: 890856
Product information "NeoTec Select Optical Stainless Steel Oxygen Sensor with Modbus Output 12 VDC, 316L, 10 Meter Cable"
NeoTec Select Optical Oxygen Sensor with Modbus Output

Durable and reliable
  • Stainless steel SS316- housing option for fresh water
  • Titanium- housing option for salt water
  • Optical technology allows maintenance-free use for up to 2 years 

Save time during set-up
  • No calibration required Plug and play 
Digital communication 
  • Open protocol Modbus RS485 signal

Dimensions

Height 2,5 cm, 14,6 cm

Weight

Weight 827 g

Other attributes

Country of origin FR
Customs tariff number 90278990
Technical data
Measuring principle: Optical measurement via luminescence 
Measurement ranges: 0.00-20.00 mg/L 0.00-20.00 ppm 0-200% 
Accuracy: ± 0.1 mg/L ± 0.1 ppm ± 1% 
Response time: 90% in less than 60 seconds 
Measuring interval: > 5s 
Membrane cap Cross-sensitivity: Organic solvents (acetone, toluene, chloroform, methylene chloride); chlorine gas 
No cross-sensitivity: pH 1-14, H2 S, CO2 , SO2 
Temperature compensation: 10K NTC 
Temperature accuracy: 0.5°C 
Sample temperature: 0-50°C (32 to 122°F) 
Max pressure: 5 bar (72. 5 PSI) 
Signal output: Direct MODBUS RS-485 
Power supply: 12 Volt (±1Volt) 
Power consumption: 1 W 
Dimensions Diameter: 25 mm (0.98 in) x Length 146 mm (5.75 in) 
Weight: 450g with 2 metre sensor cable (10ft) 
Protection class: IP68