JUMO ecoLine pH plastic shaft electrode, S8 Pg13.5 screw head with slip-on protection basket
| Quantity | Unit price |
|---|---|
| To 4 |
€128.60*
|
| To 9 |
€122.17*
|
| To 14 |
€115.74*
|
| To 19 |
€109.31*
|
| From 20 |
€106.74*
|
Please log in to receive your conditions.
Available in 28 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "JUMO ecoLine pH plastic shaft electrode, S8 Pg13.5 screw head with slip-on protection basket"
This electrode is resistant thanks to its PEI plastic shaft and offers easy handling. For this reason, it is low-maintenance and protected against damage due to its design.
JUMO ecoLine pH plastic shaft electrode with S8 Pg13.5 screw head and attachable protective cage (201005/53-18-22-0000-00-120/000; Part No. 00357022)
The JUMO ecoLine pH plastic shaft electrode is a practical solution for reliable pH measurements in general aqueous media. It combines a good price-performance ratio with a robust design and is especially suitable for applications where the sensor needs additional protection during mobile use.
The PEI plastic shaft provides a durable construction, while the attachable protective cage offers additional protection for the sensor. This is a particular advantage when used with portable measuring devices, making everyday handling easier and helping to prevent damage.
Typical applications
Equipped with an S8 Pg13.5 screw head and a standard insertion length of 120 mm, this electrode uses a polymerized KCl gel electrolyte reference system, which is well suited for measurements in general aqueous media. The proven JUMO cartridge reference system helps keep the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. An integrated temperature sensor is not available in this series.
- Drinking water monitoring and water treatment
- Swimming pools, aquatics
- Greenhouse technology
- Lightly contaminated utility, process, and wastewater
Not recommended for:
- Electroplating water treatment
- Industrial process and wastewater
- Ultrapure water
- Therapeutic baths
- Biotech and sterilization processes
Dimensions
| Height | 5,5 cm |
|---|---|
| Length | 20,5 cm |
| Width | 4,5 cm |
Weight
| Weight | 90 g |
|---|
Other attributes
| Applications | Aquaculture and Coral, Aquariums, Beer, Beverages, Environmental, Food, Horticulture, Hydroponics, Pools, Schools, Water Conditioning, Water Treatment, Wine |
|---|---|
| Country of origin | DE |
| Customs tariff number | 90278930 |
| Technical specifications | |||
|---|---|---|---|
| Variant glass shaft | Variant with plastic shaft and push-on protective basket | JUMO BlackLine Variant with plastic shaft and fixed protection basket |
|
| Shaft material | Glass | PEI* | PPO** |
| Diaphragm | Ceramics | Glass silk | Ceramics |
| Drainage system | Plastic cartridge | ||
| Temperature range | 0 to 60 °C | ||
| Pressure range*** | 0 to 6 bar | ||
| Fitting length | 120 mm | ||
| Electrode head | Plug head // Plug head with fixed cable // Screw head Pg13.5 // Screw head Pg13.5 with fixed cable For variants with fixed cable, the connection cable is protected with a bend protection. Variants with fixed cable have Protection class IP68 |
||
| Active part pH | UW glass (pH 0 to 12, briefly pH 14) | ||
| Active part ORP | Platinum dome (±2000 mV) | ||
| Electrolyte | Polymerised solid electrolyte | ||
| Recommended minimum conductivity of the measured medium | without salt deposit: 100µS/c | without salt deposit: 150µS/cm | without salt deposit: 100µS/cm |
| with salt deposit: 50µS/cm | with salt deposit: 100µS/cm | with salt deposit: 50µS/cm | |
| * corresponds to polyetherimide ** corresponds to polyphenylene ether *** The pressure data refer to constant conditions at the installation site; strong pressure surges and fluctuations should be avoided. |
|||
| Extra codes | |||
| KCl container (quiver), extra code 052 | Salt deposit, extra code 837 | ||
| see product images | The foot of the KCl container can also be used as a mounting spanner for pH or redox electrodes with Pg13.5 thread. The recesses on the removable container foot fit the hexagon of the electrode head. When storing the electrodes, the container must be filled with KCl (not with buffer solution or similar). | see product images | As an option, the electrode can be equipped with a salt reservoir in the form of four salt rings. This is recommended when using the electrode in media with low ion content or at high flow rates. The salt reserve serves to increase the service life of the electrode. The rings do not represent a manufacturing defect (crystallisation). |
| Further pH and ORP electrodes can be found in the following data sheets: see download area | |||