Our service hotline – We are here for you 📞 +49 (0) 5121 7609 99

Heyl Neomeris Service Hotline – Call us

Whether you need a quick answer, technical support or personal advice – our service team is just a call away. We listen, think along and find the right solution for your needs.

D16 Porta Sens III, front view of the gas measuring device, mobile device, LCD colour display

D16 Porta Sens III, overall view of the device, 89x229x140 mm, 3.2 kg in a case

D16 Porta Sens III, detailed view of the display, backlighting, visual alarms

Product information (Quickview)

Dimensions

Width	31 cm
Height	17 cm
Length	41 cm

Weight

4 kg

Additional properties

Country of origin	US
Customs tariff number	9027102000

D16 Porta Sens III - Portable gas detector

Article number: 890634

Price on request

Payment

Delivery & Shipping

Consultation

Quick info

Product information (Quickview)

Dimensions

Width	31 cm
Height	17 cm
Length	41 cm

Weight

4 kg

Additional properties

Country of origin	US
Customs tariff number	9027102000

Product information "D16 Porta Sens III - Portable gas detector"

The Porta Sens III is a mobile gas measuring device for carrying out regular leak checks in gas storage areas, near process plants, pipelines or in working areas.

Features:

Latest Smart Sensors
Internal sample pump and external sample suction
NiMH D-cell battery or alkaline cell
Easy to read LCD colour display with backlight
Direct and time-controlled measurement
Visual and audible alarms
Internal 4 GB data logger with USB output

Technical data:

Measuring range: depending on the sensor module used
Display: Backlit LCD color display
Accuracy: Sensor dependent, but generally ± 5% of value (limited by calibration gas)
Sensitivity: Typically 0.1-1% of sensor module range
Output: USB transmission of the stored measured value
Memory: 4 GB
Storage interval: programmable from 1 min to 60 min
Power: Rechargeable NiMH D-cell battery or alkaline battery
Operating temperature: -25 ° C to +55 ° C
Humidity: 0-95% Non-condensing
Size: 89 mm x 229 mm x 140 mm
Weight: 3,2 kg

Delivery in a case, consisting of:

Mobile gas detector Porta Sens III
Replacement filter
10" Teflon lined sampling rod
Flow meter
USB cables
Replacement NiMH D cell battery
Charger
Sensor holder
Calibration "T" adjustment

Frequently Asked Questions

The sensor’s measurement range is 0–100 ppm. The resolution is 0.1 ppm. The smallest measurement range that can be set is 0–10 ppm and the largest is 0–100 ppm. The specification ‘20 ppm standard’ refers to the sensor’s measurement range as supplied (0–20 ppm). This can be adjusted via the operating menu if necessary.

Yes.

Calibration is carried out using H₂O₂ generated on site. However, this requires a generator. Our customers send the sensors to us for recalibration. Another advantage of this procedure is that it allows us to determine at the same time whether the sensor can still be reliably calibrated or whether it will need to be replaced in the future.

The manufacturer does not provide for calibration with a substitute gas for this device. For the stationary systems from the same manufacturer, a sulphur dioxide gas generator (optional accessory) is connected for H₂O₂. However, this is not available for the Portasens.

The sensor modules are factory-calibrated before dispatch. A zero-point calibration should be carried out every 2–3 months. A full recalibration should be carried out every 6 to 12 months. Use in dirty or dusty locations increases the need for more frequent calibration. You can carry out the calibration yourself or send the sensors in for factory calibration.