JUMO meroVIEW 108Q (96 x 48 mm) - 1 analog input (universal), 1 digital input, 1 digital input/output (switchable), 2 relays (normally open), incl. 2 timers, min/max value display, hold function, tare function

Article number: 802130

Our service hotline – We are here for you 📞 +49 (0) 5121 7609 99

JUMO meroVIEW 108Q, 2 relays (normally open contacts), 2 timers, min/max value display

JUMO meroVIEW 108Q, front view, multifunction digital display with PLC function

€558.71*

Please log in to receive your conditions.

Prices incl. VAT plus shipping costs.

Show net prices
(excl. VAT)

Available in 28 days, delivery time 1-2 days

Version

Power supply: AC / DC 24 V +10 / -15 %, 48 to 63 Hz

Power supply: AC 110 to 240 V +10 / -15 %, 48 to 63 Hz

Article number: 802130

GTIN: 4068823016949

Quotation as PDF
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.

Product information "JUMO meroVIEW 108Q (96 x 48 mm) - 1 analog input (universal), 1 digital input, 1 digital input/output (switchable), 2 relays (normally open), incl. 2 timers, min/max value display, hold function, tare function "

JUMO meroVIEW 108Q – display and monitoring device with universal input (96 × 48 mm), type: 701553/8-00-00-00-00-00-00-23/000

The meroVIEW 108Q monitoring device is universally applicable in many areas thanks to its flexible analog input. The device is ideal for applications in which measured values need to be actively monitored and processed.

The JUMO meroVIEW 108Q is a versatile display and monitoring device in the 96 × 48 mm format and is suitable for a wide range of industrial applications. Thanks to the universal analog input, the device can be flexibly used for various measured variables and can be easily integrated into existing systems.

In addition to displaying measured values, the device also enables direct monitoring and further processing of signals. This makes it ideal for applications where multiple functions need to be combined in a compact device.

The clear display allows quick reading of current values. Additional features such as min/max value display and a hold function are available to retain or evaluate measured values as required.

Equipment of the meroVIEW 105Q

1 universal analog input for flexible signal processing
1 digital input
1 combined digital input/output (switchable)
2 relay outputs (normally open contacts)
integrated timer functions (2 timers)
tare function for adjusting measured values
installation format: 96 × 48 mm

Functions and application possibilities of the JUMO temperature measuring device meroVIEW

The meroVIEW 108Q is suitable for applications where measured values are not only displayed but also actively monitored and processed.

Thanks to the universal analog input, the device can be flexibly used, for example for:

monitoring various process variables
integration into existing measurement and control systems
implementation of simple control tasks via relays

The integrated timers also enable time-dependent control of processes.

Your advantages with meroVIEW

universally applicable thanks to flexible analog input
combination of display, monitoring and control
additional features such as min/max display and hold function
integrated timers for time-controlled processes
compact design in standard installation format

Other attributes

Customs tariff number	90303370
Spannungsversorgung	AC 110 bis 240 V + 10/-15% , 48 bis 63Hz

Downloads:

JUMO Temperaturmessger%C3%A4te

Technical data:

Analog Input

Thermocouples

Designation	Typ	Norm	ITS	Measuring range	Accuracy
Fe-CuNi	„L“	DIN 43710 (1985)	IPTS-68	-200 to +900 C	£ 0,25 %
Fe-CuNi	„J“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-210 to +1200 °C	£ 0,25 % off -100 °C
Cu-CuNi	„U“	DIN 43710 (1985)	IPTS-68	-200 to +600 °C	£ 0,25 % off -100 °C
Cu-CuNi	„T“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-270 to +400 °C	£ 0,25 % off -150 °C
NiCr-Ni	„K“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-270 to +1300 °C	£ 0,25 % off -80 °C
NiCr-CuNi	„E“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-270 to +1000 °C	£ 0,25 % off -80 °C
NiCrSi-NiSi	„N“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-270 to +1300 °C	£ 0,25 % off -80 °C
Pt10Rh-Pt	„S“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-50 to +1768 °C	£ 0,4 % off 20 °C
Pt13Rh-Pt	„R“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-50 to +1768 °C	£ 0,25 % off 50 °C
Pt30Rh-Pt6Rh	„B“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	-50 to +1820 °C	£ 0,25 % off 400 °C
W5Re-W26Re	„C“	DIN EN 60584-1:2014 IEC 60584-1:2013	ITS-90	0 to 2315 °C	£ 0,25 % off 500 °C
W3Re-W25Re	„D“	ASTM E1751M-15	ITS-90	0 to 2315 °C	£ 0,25 % off 500 °C
W5Re-W20Re	„A1“	GOST R 8.585-2001	ITS-90	0 to 2500 °C	£ 0,25 % off 500 °C
Chromel®-Copel	„L“	GOST R 8.585-2001	ITS-90	-200 to +800 °C	£ 0,25 % off -80 °C
Chromel®-Alumel®	„K“	GOST R 8.585-2001	ITS-90	-270 to +1300 °C	£ 0,25 % off -80 °C

^a Accuracy refers to the measurement range.

Ambient temperature influence	£ 100 ppm/K
Comparison agency	internal or external (constant)
Comparison point temperature (ex- tern)	0 to 100 °C (adjustable)
Sampling cycle	150 ms
Eingangsfilter	2nd order digital filter; Filter constant adjustable from 0 to 100.0 s

Resistance thermometer

Designation	Norm	ITS	Connection type	Measuring range	Accuracy	Measuring current
Pt100	DIN EN 60751:2009 IEC 60751:2008	ITS-90	2-Ladder	-200 to +850 °C	£ 0,2 %	500 mA
Pt100	DIN EN 60751:2009 IEC 60751:2008	ITS-90	3- Ladder	-200 to +850 °C	£ 0,1 %	500 mA
Pt1000	DIN EN 60751:2009 IEC 60751:2008	ITS-90	2-/3- Ladder	-200 to +850 °C	£ 0,1 %	50 mA
Pt100	GOST 6651-2009 A.2	ITS-90	2- Ladder	-200 to +850 °C	£ 0,2 %	500 mA
Pt100	GOST 6651-2009 A.2	ITS-90	3- Ladder	-200 to +850 °C	£ 0,1 %	500 mA
KTY			2- Ladder	-53 to +153 °C	£ 2,0 %	50 mA

^a Accuracy refers to the measurement range.

Ambient temperature influence	£ 50 ppm/K
Sensor Line Resistance	max. 30 W je Line
Sampling cycle	150 ms
Speeds	2nd order digital filter; Filter constant adjustable from 0 to 100.0 s

Resistance Potentiometer/WFG and Resistance/Potentiometer

Designation

Measuring range

Accuracy^a

Measuring current

Widerstandspotenziometer/WFG

0 bis 4000 W

£ 0,1 %

50 mA

Widerstand/Poti

0 to 400 W

0 to 4000 W

£ 0,1 %

500 mA

50 mA

^a Accuracy refers to the maximum measurement range. At small measuring spans, the linearization accuracy is reduced.

Ambient temperature influence	£ 100 ppm/K
Anschlussart
Resistance Potentiometer/	Three-wire circuit
WFG
Widerstand/Poti	Two-/three-wire circuit
Sensor Line Resistance	max. 30 W per line
Sampling cycle	150 ms
Speeds	2nd order digital filter; Filter constant adjustable from 0 to 100.0 s

Voltage, current (unit signals)

Designation	Measuring range	Accuracy	Input resistance or load voltage
Voltage	0 to 10 V	£ 0,1 %	> 500 kW
Voltage	2 to 10 V	£ 0,1 %	> 500 kW
Current	4 to 20 mA	£ 0,1 %	< 2,5 V
Current	0 to 20 mA	£ 0,1 %	< 2,5 V

^a Accuracy refers to the maximum measurement range. At small measuring spans, the linearization accuracy is reduced.

Ambient temperature influence	£ 100 ppm/K
Measuring range under/exceeding	according to NAMUR recommendation NE 43 (only current input 4 to 20 mA)
Sampling cycle	150 ms
Speeds	2nd order digital filter; Filter constant adjustable from 0 to 100.0 s

Measuring Circuit Monitoring

The behavior of the device in the event of a fault is configurable. Transmitter	Measuring range below	Exceeding the measuring range	Short circuit (sensor/line)	Bruch (Fühler/Lei- tung)	Reverse polarity
Widerstandsthermo- meter	++	++	++	++	---
Widerstand/Poti	---	++	---	++	---
Widerstandspotenzio- meter/WFG	---	++	(+)^a	(+)^b	---
Thermoelement	++	++	---	++	(+)^c
Strom 0 to 20 mA	---	++	---	---	---
Strom 4 to 20 mA	++	++	++	++	++
Spannung 0 to 10 V	---	++	---	---	++
Spannung 2 to 10 V	++	++	++	++	++
++ = is detected --- = is not recognized (+) = is conditionally recognized

^a is not recognized in all combinations

^b Break in the measurement current path is not detected

^c depending on the set characteristic curve

Digital Inputs

Input for potential-free contact

Function

Sampling cycle

Contact closed: Input is active (RON < 1 kΩ)

Contact open: Receipt is inactive (ROFF > 50 kΩ)

150 ms

Analogoutput

Voltage Ausgangssignal Lastwiderstand	DC 0(2) to Output Signal Load Resistance 10 V > 500 Ω
Current Output Signal Load Resistance	DC 0(4) bis 20 mA < 450 Ω
Accuracy	≤ 0,5 %
Ambient temperature influence	≤ 150 ppm/K

Digital Outputs

Relay (NO contact)

Switching capacity contact life

max. 3 A bei AC 230 V or DC 30 V, ohmsche Last

150.000 Circuits at Rated Load

350.000 Circuits at 1 A

Relays (NO contacts) with longer contact life

Schaltleistung Kontaktlebensdauer

max. 3 A bei AC 230 V, ohmsche Last

300.000 Schaltungen bei Nennlast

1.500.000 Schaltungen bei 1 A

Logic Output

Output

Strom

DC 0/14 V ±15 %

max. 20 mA per output (at nominal voltage 14 V)

PhotoMOS^®-Relais^a

Switching capacity

max. 200 mA at AC 30 V or DC 45 V; not short-circuit proof

^a PhotoMOS is a registered trademark of Panasonic Corporation.

Interfaces

USB-Device
Plug Type	Micro-B (Buchse)
Standard	Low-Speed, Full-Speed
Max. cable length	5 m
RS485
Baudrate	9600, 19200, 38400, 115200
Data format	8/1n, 8/1e, 8/1o, 8/2n
Protocol	Modbus-RTU as Slave
Ethernet
Plug Type	RJ45 (Buchse)
Übertragungsrate	10 Mbit/s, 100 Mbit/s
Protocol	TCP/IP, DHCP; Modbus-TCP, Modbus-RTU/ASCII über TCP, als Slave

Display

18-segment LCD displays
Digit height	obere Anzeige:	bottom display:
Typ 701510 (Format 132)	7,2 mm	3,8 mm
Typ 701511 (Format 116)	12,3 mm	5,9 mm
Typ 701512 (Format 108H)	11,5 mm	8,5 mm
Typ 701513 (Format 108Q)	16,5 mm	9 mm
Typ 701514 (Format 104)	24,8 mm	12 mm
Color	top display: white; Bottom display: green
Digits incl. decimal places	top display: 4; bottom display: 4 (5 for type 701510, 8 for type 701511)
Decimal places	0, 1, 2, 3 or automatically (configurable)

Pixel matrix LCD display (701512, 701513, and 701514 types only)
Pixel Fields
Typ 701512 (Format 108H)	2 rows of 9 pixel fields each
Typ 701513 (Format 108Q)	2 rows of 8 pixel fields each
Typ 701514 (Format 104)	2 rows of 11 pixel fields each
Pixelanzahl is Feld	8 x 5
Color	weiß

Electric Dating

Spannungsversorgung Variante 1 Variante 2	(see nameplate) AC 110 to 240 V +10/-15 %, 48 to 63 Hz AC/DC 20 to 30V, 48 to 63Hz
Electrical safety	according to DIN EN 61010, Part 1; Overvoltage category II up to 300 V mains voltage, contamination grade 2
Class	I with internal separation to SELV
Power consumption	at AC 110 to 240 V:	for AC/DC 20 to 30 V:
Typ 701510 (Format 132)	max. 3,5 W	max. 3,0 W
Typ 701511 (Format 116)	max. 4,1 W	max. 3,7 W
Typen 701512, 701513 (Formate 108H, 108Q)	max. 5,8 W	max. 5,7 W
Typ 701514 (Format 104)	max. 6,6 W	max. 6,7 W
Electrical connection	on the back via spring-loaded clamps (push-in technology)
Conductor cross-section
Wire or stranded wire	min. 0,2 mm², max. 1,5 mm²
(without ferrule)
Stranded wire with ferrule	without plastic collar: min. 0,2 mm², max. 1,5 mm²
	mit Kunststoffkragen: min. 0,2 mm², max. 0,75 mm²
Stripping length	8 mm

Umwelteinflüsse

Ambient temperature range Storage Operation	-30 to +70 °C -10 to +55 °C
Installation height	max. 2000 m above NN
Climatic environmental conditions Climate resistance Storage	according to DIN EN 60721-3 with extended temperature range £ 90 % relative humidity without condensation after class 1K2
Operation	after class 3K3

Mechanical environmental conditions Storage

Transport

Operation

according to DIN EN 60721-3

according to class 1M2

by class 2M2

according to class 3M3

Electromagnetic compatibility (EMV) Emission

Stability

according to DIN EN 61326-1

Class A - for industrial use only - Industry Requirement

Gehäuse

Housing type	Plastic enclosures for panel installation in accordance with DIN IEC 61554 (use indoors))
Cabinet front	made of plastic with membrane keypad
Panel thickness	1 to 10 mm
Housing Mounting	in the control panel using the supplied mounting frame or the two fastening elements
Usage position	Any a
Protection	according to DIN EN 60529, front IP65, rear IP20
Gewicht
Typ 701510 (Format 132)	max. 85 g
Typ 701511 (Format 116)	max. 120 g
Typ 701512 (Format 108H)	max. 160 g
Typ 701513 (Format 108Q)	max. 160 g
Typ 701514 (Format 104)	max. 220 g

^a The maximum permissible ambient temperature only applies to installation with vertical orientation of the display.

Approvals and test marks

Mark	Checkpoint	Certificates/Test Numbers	Test basis	Applies to
c UL us	Underwriters Laboratories	E201387	UL 61010-1 (3. Ed.), CAN/CSA-22.2 No. 61010-1 (3. Ed.)	all versions
DNV GL	DNV GL	TAA00001B3	Class Guideline DNVGL-CG-0339	Typ 701511 (DC 20 bis 30 V) and Type 701514 (AC 110 to 240 V), without Ethernet interface, panel mounting
BUREAU VERITAS	Bureau Veritas	53627/A0 BV	Bureau Veritas Rules for the Classification of Steel Ships

The device has approval if the relevant test mark is shown on the device.