Horiba S074-4EC salt exchange sensor for 4EC-Salt-11
€94.01*
Please log in to receive your conditions.
Available in 14 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "Horiba S074-4EC salt exchange sensor for 4EC-Salt-11"
HORIBA’s LAQUAtwin pocket testers offer a comprehensive solution for the immediate and accurate measurement of water quality parameters directly on site. To ensure that these measurements remain reliable and accurate in the future, it is important to check the sensors regularly and replace them with replacement sensors when necessary.
The replacement sensors developed for the HORIBA LAQUAtwin series include various types for different measurements: pH, conductivity, salinity, redox (ORP), as well as ion-selective sensors for sodium, potassium, nitrate, calcium and fluoride. These sensors have all been developed with the aim of maximising the user-friendliness and precision for which HORIBA is renowned worldwide in water quality testing. HORIBA’s replacement sensors ensure that users’ instruments always deliver optimum performance and carry out precise measurements.
Advantages of HORIBA replacement sensors:
- Easy replacement: As the sensors are easy to replace, they can be swapped out quickly, allowing measurements to resume without delay.
- High precision: Thanks to the replacement sensors, measurement results are accurate and reliable.
- Wide measurement range: Various sensor types are available to measure a wide range of water quality parameters.
- Durability: The sensors are designed to have a long service life, even under difficult conditions.
Product features:
- 4-chamber salt sensor S074-4EC
- Replacement sensor for LAQUAtwin 4ECSalt-11 (item number: 896096)
- Requires a minimum sample volume of 0.12 ml
- Waterproof
- Salinity 0.0 to 100.0 g/l, 0.00 to 10.00 %
- Minimum sample volume required 0.12 ml
- Temperature sensor Integrated
- Operating temperature range 5 to 40 °C
- Note: The sensors for LAQUAtwin-Salt11 and LAQUAtwin-4ECSalt-11 are not compatible
Instructions for replacing the sensor:
To ensure the longevity and accuracy of your HORIBA LAQUAtwin Pocket Tester, please follow these instructions when replacing the sensor:
Removing the sensor- Switch off the meter.
- Carefully detach the sensor from the meter and lift the tip of the probe.
- Disconnect the sensor from the meter so that these two components are no longer connected.
- Switch off the meter.
- Ensure that the waterproof seal is clean and undamaged.
- Attach the sensor to the meter by inserting the hook ‘A’ on the back of the meter into the hole ‘a’ at the tip of the sensor.
- Ensure that the waterproof seal is not twisted.
After replacement, it is essential to follow the steps in the user manual for the relevant tester to ensure the meter is ready for accurate measurements. (These instructions are available for our products. Calibration and, where necessary, conditioning are usually required.)
Question: How can I check whether my sensor is showing signs of wear?
Answer: By checking the sensor’s condition, as explained in more detail below:
Check the condition of the sensor by performing a 2-point calibration. If an error occurs during calibration, this indicates that the sensor has deteriorated. In this case, it would be advisable to replace the sensor.
To ensure the high standards and reliability of water quality measurements taken with HORIBA LAQUAtwin Pocket testers, regular checks and timely replacement of the sensors are essential.
Note:
How can I tell if I have an old or new device?
If your Pocket Tester is marked ‘4-cell’, you have the latest version of this device. In this case, you will need the replacement sensors listed in the cross-selling section, as well as the standard and conditioning solutions. These have been specially optimised for the new Pocket Testers and are not suitable for older models.
Manufacturer’s item number: 3201079163
Dimensions
| Height | 2 cm |
|---|---|
| Length | 14 cm |
| Width | 4,5 cm |
Weight
| Weight | 0,03 g |
|---|
Other attributes
| Country of origin | JP |
|---|---|
| Customs tariff number | 90279000 |
Matching pocket testers
Horiba LAQUAtwin SALT-11 NaCl / Saltwater (conductivity-based measurement principle) What is salinity? Salinity describes the concentration of dissolved salts in water and is a crucial parameter for the quality of drinking water, the health of aquatic organisms and production safety in the food industry. Our customers appreciate the intuitive operation of the LAQUAtwin SALT-11 and SALT-22 measuring instruments from HORIBA, as well as the accurate measurement results achieved with these portable handheld devices – directly on site and with a minimal sample volume. Precise salinity measurement – the mobile solution from HORIBA The Horiba LAQUAtwin Salz 4ECSalt-11 is a unique, compact measuring device from HORIBA that combines an electrode, display and sample container in a single unit. This enables simple and effective on-site measurements by taking a direct reading from just a single drop. Your pocket laboratory: The only pocket-sized meter that directly measures conductivity in a 0.12 ml sample and converts this into salinity or salt concentration. You do not need a beaker to calibrate the meter or measure a sample. Simply place a few drops of the standard solution or sample onto the sensor. This method saves you time and prevents the wastage of your valuable sample. Why is measuring salinity important? Salinity, i.e. the salt content of a liquid, is a crucial parameter in water quality, environmental analysis and food production. With a HORIBA salinity meter, you can obtain accurate results in real time and reliably monitor key quality parameters – simply, quickly and on the go. In aquaculture & fish farming: Salt content influences the growth, health and behaviour of fish and other aquatic organisms. In agriculture & irrigation: Salinity has a direct impact on soil quality and the uptake of nutrients by plants. In the food industry: Monitoring salt content is crucial for taste, shelf life and compliance with quality standards. In drinking water monitoring: Excessive salinity can impair water quality and must be monitored regularly. Product benefits of the HORIBA LAQUAtwin SALT models: Compact & portable: Ideal for mobile use in the field, laboratory or production environment. Fast results: Measurement using just a single drop of sample – perfect for on-site testing. Precise & reliable: High measurement accuracy for informed decisions in research and practice. User-friendly: Simple calibration, intuitive operation and waterproof design (IP67). Typical applications: Aquaculture & fish farms, agriculture & irrigation systems, food manufacturers & quality control laboratories, drinking water treatment plants & environmental authorities.
Buffer and calibration solutions
514-4EC-CON Conditioning Solution – For LAQUAtwin 4EC-11, 4EC-22, 4EC-33 and 4ECSalt-11 To ensure the precise calibration and maintenance of HORIBA LAQUAtwin Pocket Testers, HORIBA provides a special range of buffer, calibration and standard solutions. The 514-4EC-CON conditioning solution ensures that your 4EC Pocket Tester is optimally prepared by activating the sensor surface and creating stable measurement conditions. Furthermore, regular use of the solution helps to extend the electrode’s service life and prevent measurement deviations. This ensures that the measured conductivity values are always reliable and meaningful. A practical pack size of 6 x 14 ml of these solutions meets the requirements of the Pocket Tester, as only a few drops are needed for calibration. This pack size helps to reduce waste and increase efficiency during regular calibrations. With these specialised solutions, the HORIBA LAQUAtwin Pocket Testers always deliver accurate and reliable measurement results. The integrity of your measurement data and the service life of your equipment can be ensured through regular calibration using these specially formulated solutions. It is particularly important to select the correct calibration and standard solution in order to maintain measurement accuracy and ensure the reliability of water quality checks in various applications. Note: Conditioning solution 514-4EC-CON is only suitable for the LAQUAtwin 4EC-11, 4EC-22, 4EC-33 and 4ECSalt-11 testers. Manufacturer’s item number: 3201081522
To accurately calibrate and maintain the HORIBA LAQUAtwin Pocket Testers, HORIBA provides a special selection of buffer, calibration and standard solutions. A convenient pack size of 6 x 14 ml of these solutions meets the requirements of the pocket testers as only a few drops are needed for calibration. This specific pack size helps to reduce waste and optimize efficiency during regular calibrations. The solutions available cover a variety of measurement ranges, allowing users to select the appropriate solution to suit their individual analysis or measurement needs: - pH buffer solutions: Solutions with pH values of 4.01 or 7.00 are available to calibrate the pH measurement. With these buffers it is possible to precisely regulate and control the pH measurement function of the LAQUAtwin Pocket Tester.- Conductivity standard solutions: 1413 μS/cm standard solutions ensure that the conductivity measurement of your devices is carried out precisely.- NaCl standard solutions: 0.5% or 5.0% NaCl solutions are available for the calibration of salinity measurement.- Ion standard solutions: HORIBA provides standard solutions to calibrate ion selective measurements. HORIBA provides standard solutions for sodium, potassium, nitrate and calcium, available in different concentrations: from low (e.g. 150 ppm) to high concentrations (e.g. 5000 ppm).- Fluoride ion standard solutions: For the calibration of fluoride measurements, HORIBA offers standard solutions with concentrations of 1 ppm and 10 ppm.- TISAB solution: A special solution for use with fluoride ion standard solutions to adjust the ionic strength of the sample for precise fluoride measurements.- ORP standard solution: For the calibration of redox measurements (ORP), HORIBA offers a solution with a redox potential of 225 mV. With these special solutions, the HORIBA LAQUAtwin pocket testers always provide accurate and reliable measurement results. The integrity of their measurement data and the lifetime of their devices can be ensured by regular calibration with these specifically formulated solutions. It is of great importance to select the appropriate calibration solution and standard solution to maintain the accuracy of measurements and ensure the reliability of water quality measurements in various applications. Manufacturer Part No. 3999960112
To accurately calibrate and maintain the HORIBA LAQUAtwin Pocket Testers, HORIBA provides a special selection of buffer, calibration and standard solutions. A convenient pack size of 6 x 14 ml of these solutions meets the requirements of the pocket testers as only a few drops are needed for calibration. This specific pack size helps to reduce waste and optimize efficiency during regular calibrations. The solutions available cover a variety of measurement ranges, allowing users to select the appropriate solution to suit their individual analysis or measurement needs: - pH buffer solutions: Solutions with pH values of 4.01 or 7.00 are available to calibrate the pH measurement. With these buffers it is possible to precisely regulate and control the pH measurement function of the LAQUAtwin Pocket Tester.- Conductivity standard solutions: 1413 μS/cm standard solutions ensure that the conductivity measurement of your devices is carried out precisely.- NaCl standard solutions: 0.5% or 5.0% NaCl solutions are available for the calibration of salinity measurement.- Ion standard solutions: HORIBA provides standard solutions to calibrate ion selective measurements. HORIBA provides standard solutions for sodium, potassium, nitrate and calcium, available in different concentrations: from low (e.g. 150 ppm) to high concentrations (e.g. 5000 ppm).- Fluoride ion standard solutions: For the calibration of fluoride measurements, HORIBA offers standard solutions with concentrations of 1 ppm and 10 ppm.- TISAB solution: A special solution for use with fluoride ion standard solutions to adjust the ionic strength of the sample for precise fluoride measurements.- ORP standard solution: For the calibration of redox measurements (ORP), HORIBA offers a solution with a redox potential of 225 mV. With these special solutions, the HORIBA LAQUAtwin pocket testers always provide accurate and reliable measurement results. The integrity of their measurement data and the lifetime of their devices can be ensured by regular calibration with these specifically formulated solutions. It is of great importance to select the appropriate calibration solution and standard solution to maintain the accuracy of measurements and ensure the reliability of water quality measurements in various applications. Manufacturer Part No. 3999960113