€126.62*
Available, delivery time: 1-2 days
Original indicator solution in a 500 ml bottle for measuring residual hardness in water with the Testomat 808 or F-BOB, designed for a limit value of 2 °dH.
Reliable liquid solution for detecting increased residual hardness
Setting to a limit value of 2 °dH enables the targeted detection and monitoring of medium to higher hardness groups, which is particularly important for process water and feed water analyses.
The indicator has been specially designed for a higher residual hardness range and provides stable analysis values directly from the measuring device. It impresses with its consistent responsiveness, even with demanding water quality requirements.
The shelf life of an indicator is printed on the product label for each batch. In accordance with our terms and conditions, we deliver with a guaranteed minimum shelf life of 7 months.
When it comes to indicator consumption, a distinction must first be made between TH indicators (e.g. TH 2005, 2025, 2050, etc.), which are used for the Testomat ECO, Testomat EVO TH, Testomat 2000 and Testomat Limit LT analysis devices, and the indicators for the Testomat 808 (300 series indicators, e.g. indicators 301, 305, etc.).
The indicator consumption per analysis for the TH indicators is directly related to the limit value to be monitored. The higher this is, the higher the indicator consumption. For the Testomat 808 indicators (300 series), consumption is approximately 80 µl per analysis.
By entering the operating data (analysis interval, limit value, etc.), the exact consumption or indicator requirement per year can be determined using our indicator consumption calculator: Indicators consumption calculator - Heyl Neomeris
The indicator is available in both 500 ml and 100 ml bottles. The analyser is delivered with the 500 ml bottle set up and the scope of delivery includes the screw cap with hole and insert for the screw cap of the 500 ml indicator bottle. For operation with 100 ml bottles, the bottle size must be changed to 100 ml in the basic programming and the screw cap with hole and insert for the indicator must also be purchased. For Testomat 808 devices, the conversion kit (item no. 37580) must be purchased for the use of 100 ml indicator bottles, and for Testomat 808 SiO2 devices, the insert with screw cap and suction tube (item no. 37645) and the hose connector ø 3.5 mm (item no. 37643) must be purchased. For all other Heylwelt Testomat devices, please use the conversion kit with item no. 40143.
The safety data sheets can be found in the online shop (www.heylneomeris.shop) under the menu item – Service/Help – Downloads – Safety data sheets.
Disposal instructions can be found in section 13 of the safety data sheet. Disposal must be carried out in accordance with official regulations.
The indicator can no longer be used after the expiry date. After the expiry date, accurate measurement results can no longer be guaranteed.
Section 7 of the safety data sheet contains all relevant information on storing the indicator. The recommended storage temperature should be between 15-25°C.
Measurement errors when using third-party indicators! The use of third-party indicators can lead to large measurement deviations or measurement errors. Damage caused by foreign particles in the area of the dosing pump, measuring chamber or valves is also possible. The use of third-party indicators will void the warranty! Only use original Heyl indicators, which are specially designed to meet the requirements of the measuring devices and thus guarantee accurate measurement results.
| Height | 7 cm |
|---|---|
| Length | 11 cm |
| Width | 14 cm |
| Weight | 600 g |
|---|
| Country of origin | EU |
|---|---|
| Customs tariff number | 38221900 |
