HORIBA pH Electrodes – Precise Sensor Technology for Reliable pH Measurements

Manufacturer number: 3014081107This refillable pH electrode can measure samples in very slender test tubes (e.g., NMR test tubes) due to its long, thin, glass-body.Waterproof

Manufacturer number: 3014080850This glass electrode with conical tip and integrated temperature sensor is designed for pH measurement in food.

Manufacturer number: 3014079136This glass-body, refillable pH electrode with temperature sensor has a sleeve junction for improved stability and repeatability. Ideal for highly accurate pH measurement.

Manufacturer number: 3200611623This glass-body, refillable pH electrode is recommended for a wide range of applications, including pH buffers and aqueous test solutions.Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

Manufacturer number: 3200611627This glass-body, refillable pH electrode can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

Manufacturer number: 3200611625This plastic-body, refillable pH electrode is recommended for general-purpose use.

The Horiba 9600-10D PUREIL pH electrode can perform pH measurements in water within five minutes without affecting its conductivity thanks to its gel ion liquid salt bridge. This pH electrode allows pH values in water with low conductivity to be measured accurately and quickly. An innovative pH electrode that does not release KCl Accurate readings through quick and easy measurement This pH electrode is used to determine pH values in water in order to reliably determine pH values. It supports measurements in the pH range 0-14 and is ideal for water with low conductivity (<100 µS/cm) such as ultrapure water samples (e.g., distilled water, rainwater, reverse osmosis water, and boiler water). KCl is usually diffused in pH electrodes, but the use of a newly developed ionic liquid salt bridge now makes it possible to stabilize the potential difference at the liquid interface. When measuring with the 9600-10D PUREIL pH electrode, no potassium chloride is released that could influence the measurement or the pH value in samples with low ionic strength or special solutions. Advantages: Maintenance-free and waterproof Built-in temperature sensor for automatic temperature compensation Minimal dissolution of the ionic liquid during the measurement process Precise and fast measurement even with samples with low electrical conductivity The impact on the sample is a maximum of 1/10,000 compared to conventional methods Measurements are also possible with samples that react with KCl Waterproof construction Suitable for: Can be used for water with low electrical conductivity (pure water, rainwater, river water) and medical solutions (injections). Solutions that react with KCl (potassium chloride) or contain ions, such as injection solutions. Not suitable for: Since the Pure IL pH electrode uses an ionic liquid as a salt bridge as a reference electrode, it is not suitable for measuring samples containing surfactants, heavy metal ions, or organic solvents. For acidic samples, citrate buffer (pH 3.776 at 25 °C) is recommended for calibration instead of phthalate buffer (pH 4.01 at 25 °C) in order to achieve a more accurate measurement. Why should I use this electrode? The 9600-10D PUREIL is a very good and stable pH electrode. If you value speed and accuracy, this electrode is the right choice. Choose the winner of the 2012 Super Monozukuri Parts Award in the “Healthcare and Medical Equipment Parts” category.

Manufacturer Part Number: 3200585428This glass-body, refillable pH electrode with integrated temperature sensor is recommended for a wide range of applications, including pH buffers and aqueous test solutions.  Offers quick stability and drift reductionConstructed with responsive glass that is 10x stronger than JIS standardsThe dome-shaped tip provides strength in all directions, reducing damage concernsWaterproof, Pb-free glass

Manufacturer number: 3200585447This refillable glass-body pH electrode with temperature sensor can measure samples as low as 50µL.Compatible with extremely small sample containers (e.g., microtubes)Temperature sensor is placed beside the bulb for quick responseWaterproof

Manufacturer number: 3200360505This refillable pH electrode with plastic housing and integrated temperature sensor is recommended for general use.

Manufacturer number: 320052411This plastic-body, refillable pH electrode with integrated temperature sensor can measure 1% hydrofluoric acid solution (at 25°C, immersed for 1min) for about 1000X. Suitable for drain water measurement after etching process.

The Horiba 9652-10D pH electrode with double diaphragm is a durable, gel-filled glass electrode in a robust plastic housing, specially developed for mobile use with handheld measuring devices from the LAQUA 200 series. It covers a measuring range from 0 to 14 pH and guarantees reliable results in a temperature range from 0 to 80 °C. The combination of a double diaphragm (double junction) and a porous, sintered polyethylene contact ensures stable measuring performance even under demanding conditions. An integrated temperature sensor enables accurate, temperature-compensated pH measurements. Thanks to its gel filling, the electrode is virtually maintenance-free and does not require refilling of the electrolyte solution.  Manufacturer item number: 3200786359

Manufacturer number: 3200585455This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.Electrode: 251mm length, 7mm diameterConstructed with responsive glass that is 10x stronger than JIS standardsWaterproof, Pb-free glass

Manufacturer number: 3200585463pH electrode with integrated temperature sensor for stable measurements of highly viscous samples. The saline bridge part is equipped with a movable sleeve that can be easily cleaned to prevent viscous samples from clogging the saline bridge and to keep measurements stable and accurate.Rapid stabilisation and reduction of aeronauticsToupH electrodes use sensitive glass, reducing the risk of damageWaterproof (IP-67), pb-free glassWhen measuring samples with high viscosity or non-aqueous solutions (e.g. paints or cosmetics), we recommend using the instrument's chart function to ensure stability.

The Horiba LAQUA 300 BNC adapter is designed to act as an adapter for connecting an ion-selective electrode to the corresponding Smart Sensor module, which is fitted with a cable for connection to a HORIBA Laqua 300 series analyser. HORIBA BNC Adapter 300-BNC – Maximum flexibility for your HORIBA Laqua WQ300 analysers The HORIBA BNC Adapter 300-BNC is the ideal solution if you wish to flexibly expand your HORIBA Laqua WQ300 analysers and easily connect a wide variety of electrodes for immediate use. Whether in the laboratory, in water analysis or in industrial quality control – with this adapter, you can create a universal connection between the measuring instrument and the electrode, significantly expanding the range of applications for your measurement technology. Universal compatibility – Greater freedom in electrode selection With the HORIBA 300-BNC Adapter, you are no longer restricted to manufacturer-specific sensors. The adapter stands out because it can connect not only HORIBA-specific electrodes but also electrodes from other manufacturers, provided they have a BNC connector. The inclusion of a second input in the form of a RCA connector also enables the transmission of temperature data, supporting temperature-compensated measurement and display. Compatibility includes: 3-in-1 / combination pH electrodes and the pH sensor heads 300PH-2 / 300PH-5 3-in-1 / combination ORP electrodes and the ORP sensor head 300-O-2 Combination ion-selective electrodes (ISEs) and the ion sensor head 300-I-2 Thanks to an additional phono/RCA connector, temperature data can also be transmitted – for precise, temperature-compensated measurements. Which Horiba ion-selective electrodes is the adapter compatible with? 895882 Horiba 6560S-10C, chloride ion (Cl-) electrode 895883 Horiba 6561S-10C, fluoride ion (F-) electrode 895880 Horiba 5002S-10C, Ammonia (NH3) ion electrode with 3x membrane cap Your benefits at a glance Extended measurement capabilities: Use a wide variety of electrodes and measure a multitude of parameters – from pH and redox to specific ions. Manufacturer-independent flexibility: Choose the best electrode for your application – regardless of the manufacturer. Precise measurement results: Thanks to temperature compensation, you obtain reliable and reproducible results, even under changing conditions. Easy to use: The adapter allows electrodes to be connected quickly and easily to the WQ300 series measuring instruments. This saves time and optimises use in the laboratory and in the field. Quick connection, secure fit and ready for immediate use – ideal for laboratory and field use. Typical applications The HORIBA BNC Adapter 300-BNC is perfect for: Water analysis & environmental monitoring Research & development laboratories Food and beverage industry Chemical and pharmaceutical industry Quality assurance & production control Whether you are measuring pH values, determining redox potentials or analysing ion concentrations – this adapter turns your measuring instrument into a universal analysis platform. It is particularly useful for users who need a flexible solution to carry out a wide range of measurements with their existing HORIBA WQ300 measuring instruments. The 300-BNC adapter significantly expands the range of applications for the WQ300 series and enables cross-manufacturer compatibility in the field of electrochemical measurements. Why buy the HORIBA 300-BNC adapter? If you already own a HORIBA Laqua WQ300 meter, this adapter is an essential accessory for: continuing to use your existing electrodes saving on the cost of new sensor systems significantly expanding your measurement capabilities The HORIBA 300-BNC adapter transforms your HORIBA Laqua WQ300 series analysers into an open and flexible measurement system for a wide range of applications. Benefit from maximum compatibility, precise measurement results and easy integration into existing measurement processes.

300-P-C pH sensor cartridgeManufacturer article number: 3200786363

Manufacturer Part Nr. 3200459834