JUMO Screw-in Resistance Thermometer with Connection Cable and Loose Screw Connection JUMO Screw-in Resistance Thermometer with Connection Cable and Loose Screw Connection, Type: 902050/20-402-1003-1-6-37-114-11-2500/315,317 This screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. With metal braided connection cable, loose screw connection, 1x Pt100 in a two-wire circuit, 6 mm thermowell diameter, 37 mm installation length and M10x1 process connection, shielded version and high temperature measuring ranges up to +400 °C, this version is particularly suitable for compact measuring points and applications with increased temperature requirements. Technical data Version: Screw-in resistance thermometer with connection cable and loose screw connection Measuring insert: 1x Pt100 Circuit type: Two-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +400 °C Thermowell diameter: 6 mm Installation length: 37 mm Process connection: M10x1 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Typical areas of application Temperature measurement in cartridge heaters, heating blocks or heated components Temperature monitoring in pipelines, tanks and apparatus Applications in dry and humid environments Use in higher ambient temperatures General industrial and process applications Advantages and special features of this JUMO screw-in resistance thermometer A clear advantage of this version lies in the combination of robust construction and high temperature resistance. The metal braided connection cable is designed for temperatures from -50 to +400 °C and is therefore interesting for applications where standard cables are not sufficient. In addition, the shielded connection cable supports interference-free signal transmission, which can be particularly advantageous in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer for higher temperature measuring ranges is required. The Pt100 used according to DIN EN 60751, Class B, is one of the proven standards in temperature measurement technology and is suitable for many typical measuring tasks. The two-wire circuit makes this version a practical solution for applications where reliable temperature measurement is the main focus. The mechanical design is also tailored for practical use. The loose screw connection allows flexible adjustment during installation, while the M10x1 process connection and the installation length of 37 mm make this version particularly interesting for smaller or confined measuring points. This allows the thermometer to be integrated well into technical systems where temperatures must be monitored permanently.

JUMO Screw-in Resistance Thermometer with Pt100 in Three-wire Circuit, M10x1 Process Connection and Shielded Version for Compact Measuring Points and High Temperatures up to +400 °C. JUMO Screw-in Resistance Thermometer with Connection Cable and Loose Screw Connection, Type: 902050/20-402-1001-1-6-37-114-11-2500/315,317 This JUMO screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. In this version, it is equipped with 1x Pt100 in a three-wire circuit, a metal braided connection cable, loose screw connection, 6 mm thermowell diameter, 37 mm installation length and M10x1 process connection. This makes the version particularly suitable for compact measuring points and applications with increased temperature requirements. Technical data Version: Screw-in resistance thermometer with connection cable and loose screw connection Measuring insert: 1x Pt100 Circuit type: Three-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +400 °C Thermowell diameter: 6 mm Installation length: 37 mm Process connection: M10x1 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Typical areas of application Air conditioning and refrigeration technology Heating engineering, furnace construction and apparatus engineering Wherever temperature measurements are required in pipelines, tanks, machines and technical systems In compact measuring points in liquid and gaseous media Special features and advantages of this JUMO screw-in resistance thermometer An advantage of this version lies in the combination of compact design and high temperature resistance. The metal braided connection cable is designed for temperatures from -50 to +400 °C and is therefore suitable for applications where standard cables are not sufficient. In addition, the shielded connection cable supports interference-free signal transmission, which can be particularly advantageous in technical and industrial environments. The mechanical design is also tailored for practical use. The loose screw connection allows flexible adjustment during installation, while the M10x1 process connection and the installation length of 37 mm make this version particularly interesting for smaller or confined measuring points. This allows the thermometer to be integrated well into technical systems where temperatures must be monitored permanently. The additional type addition with kink protection spring relieves strain on the cable transition and makes this version even more robust under mechanical stress. Especially in applications where movement, tension or frequent handling play a role, this is a practical advantage. Why should you choose this version from JUMO? This version is a good choice when precise Pt100 temperature measurement with improved compensation of line influences is required. The Pt100 used according to DIN EN 60751, Class B, is one of the proven standards in temperature measurement technology and is suitable for many typical measuring tasks. The three-wire circuit offers advantages when measured values need to be recorded more accurately than with a simple two-wire circuit. Type: 902050/20-402-1001-1-6-37-114-11-2500/315,317

JUMO Screw-in Resistance Thermometer with Threaded Thermowell for Precise Temperature Measurement in Liquid and Gaseous Media JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell, Type: 902050/40-390-1003-1-8-25-111-11-2500/315,317 This screw-in resistance thermometer with connection cable and threaded thermowell is designed for precise temperature measurement in liquid and gaseous media. With its 1x Pt100 in a two-wire circuit, metal braided connection cable, 25 mm installation length, M8 process connection and shielded connection cable, this version is particularly suitable for compact installation situations and applications with increased requirements for temperature resistance and signal transmission. Advantages and special features of this JUMO screw-in resistance thermometer A major advantage of this version is its robust design for more demanding operating conditions. The metal braided connection cable is designed for temperatures from -50 to +300 °C and therefore offers excellent conditions for applications where standard cables reach their limits. At the same time, the shielded cable supports interference-free signal transmission, which can be a practical advantage especially in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer with high temperature resistance and proven Pt100 measurement technology is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many common applications. The two-wire circuit makes this version a classic and practical solution for numerous measuring tasks. The mechanical design is also tailored for practical use. The M8 process connection and the 25 mm installation length make this thermometer particularly interesting for smaller measuring points or confined installation situations. The combination of threaded thermowell and compact design ensures that the version can be integrated well into technical systems where temperatures must be monitored reliably and permanently. In addition, the type addition with kink protection spring helps relieve strain on the cable transition. This special feature makes the version even more robust when the connection cable is subject to mechanical stress or when movement and tensile loads occur during operation. Typical areas of application Air conditioning and refrigeration technology Heating engineering, furnace construction and apparatus engineering Wherever temperatures in liquid or gaseous media must be measured precisely and at the same time a compact, temperature-resistant design is required, this version is a suitable choice. Technical data Version: Screw-in resistance thermometer with connection cable and threaded thermowell Measuring insert: 1x Pt100 Circuit type: Two-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +300 °C Thermowell diameter: M8 Installation length: 25 mm Process connection: M8 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable

JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell, Type: 902050/40-390-1001-1-8-25-111-11-2500/315,317 The JUMO screw-in resistance thermometer with Pt100 in a three-wire circuit, metal braided connection cable, M8 process connection and shielded version is particularly suitable for compact measuring points and higher temperature ranges up to +300 °C. This screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. With 1x Pt100 in a three-wire circuit, metal braided connection cable, installation length of 25 mm, M8 process connection and shielded connection cable, this version is particularly suitable for compact measuring points and applications with increased requirements for temperature resistance and signal transmission. Typical areas of application Measuring points in liquid and gaseous media Dry and humid environments Compact or confined installation situations Applications with vacuum or overpressure Technical systems with increased requirements for the connection cable Technical data Version: Screw-in resistance thermometer with connection cable and threaded thermowell Measuring insert: 1x Pt100 Circuit type: Three-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +300 °C Thermowell diameter: M8 Installation length: 25 mm Process connection: M8 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Advantages and special features of the JUMO screw-in resistance thermometer This version shows its strengths especially under more demanding operating conditions. The metal braided connection cable is designed for temperatures from -50 to +300 °C and therefore offers excellent conditions for applications where standard cables are not sufficient. At the same time, the shielded connection cable supports interference-free signal transmission, which can be a practical advantage especially in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer with proven Pt100 measuring technology and improved compensation of line influences is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many common applications. The three-wire circuit offers advantages compared to a simple two-wire circuit when measured values need to be recorded as precisely as possible. The mechanical design is also tailored for practical use. The M8 process connection and the installation length of 25 mm make this thermometer particularly interesting for smaller measuring points or confined installation situations. The compact design ensures that the version can be integrated well into technical systems where temperatures must be monitored reliably and permanently.

Screw-in resistance thermometer with connection head form J with stepped protection tube for air measurement Measuring range from -50 to +200 °C Single resistance thermometer 1x Pt 100 in two-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 75 mm Process connection: G1/2 threaded connection Extra codes: none The screw-in RTD temperature probe with connection head is specially designed for use in various industries such as air conditioning and refrigeration technology and heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media, with a temperature range of -50 to +400 °C. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure. The measuring insert is fitted as standard with a Pt100 temperature sensor in accordance with the DIN EN 60751:2009 / IEC 60751:2008 standards. This sensor has a temperature coefficient α of 3.850 × 10-3 °C-1 and is installed in a two-wire circuit. Versions with Pt500 or Pt1000 are also available as an option. For more precise measurement results, the connection can be made either in a three-wire or four-wire circuit, and it is also possible to integrate a transmitter into the connection head.

JUMO Dtrans T100 screw-in RTD temperature probe without transmitter, M12 x 1 machine plug connection Measuring range from -50 to + 200 °C 1x Pt100 in four-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 100 mm Process connection: G1/2 screw connection Thermowell material: Stainless steel 316 L (material no. 1.4404/1.4435) EU and China RoHS compliant Extra code: without M12 x 1 push-on connector; protection class IP67 to DIN EN 60529 with attached machine plug USB interface for configuration with setup programme The screw-in resistance thermometer in a compact design consists of a thermowell with built-in temperature sensor, a process connection and a housing for the transmitter electronics. The programmable two-wire transmitter offers a robust solution for the precise recording of temperatures in a temperature measuring range of -50 to + 150°C, with a neck tube up to 260°C and is therefore versatile in use. The device has a USB interface that enables simple configuration via a setup programme. With the help of this programme, parameters such as measuring range, fine adjustment and measuring circuit monitoring can be adjusted to meet the requirements of different applications. The output signal 4 to 20 mA or reversed 20 to 4 mA is available linearised (temperature linear). The device is intended for industrial use and complies with European standards to ensure electromagnetic compatibility (EMC).

UMO Dtrans T100 screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection Measuring range from -50 to + 150 °C 1x Pt1000 in four-wire circuit Tolerance class: Class A Thermowell diameter: 6 mm Installation length: 50 mm Process connection: without Thermowell material: Stainless steel 316 L (material no. 1.4404/1.4435) EU and China RoHS compliant Extra code: without M12 x 1 push-on connector; protection class IP67 to DIN EN 60529 with attached machine plug USB interface for configuration with setup programme The screw-in resistance thermometer in a compact design consists of a thermowell with built-in temperature sensor, a process connection and a housing for the transmitter electronics. The programmable two-wire transmitter offers a robust solution for the precise recording of temperatures in a temperature measuring range of -50 to + 150°C, with a neck tube up to 260°C and is therefore versatile in use. The device has a USB interface that enables simple configuration via a setup programme. With the help of this programme, parameters such as measuring range, fine adjustment and measuring circuit monitoring can be adjusted to meet the requirements of different applications. The output signal 4 to 20 mA or reversed 20 to 4 mA is available linearised (temperature linear). The device is intended for industrial use and complies with European standards to ensure electromagnetic compatibility (EMC).

Screw-in resistance thermometer with form J connection head  With continuous protection tube Measuring range from -50 to +200 °C Single resistance thermometer 2x Pt 100 in two-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 50 mm Process connection: screw connection G ½ Extra codes: none The screw-in RTD temperature probe with connection head is specially designed for use in various industries such as air conditioning and refrigeration technology and heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media, with a temperature range of -50 to +400 °C. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure.The measuring insert is fitted as standard with a Pt100 temperature sensor in accordance with the DIN EN 60751:2009 / IEC 60751:2008 standards. This sensor has a temperature coefficient α of 3.850 × 10-3 °C-1 and is installed in a two-wire circuit. Versions with Pt500 or Pt1000 are also available as an option. For more precise measurement results, the connection can be made either in a three-wire or four-wire circuit, and it is also possible to integrate a transmitter into the connection head. Depending on the measurement requirements, a single or dual resistance thermometer can also be selected.

JUMO Wall-Mounted Resistance Thermometer with Pt100 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1003-1/000 The wall-mounted resistance thermometer is suitable for temperature measurements in HVAC applications with increased protection requirements. Equipped with a Pt100 sensor in a two-wire circuit, a measuring range of -30 to +90 °C, and protection class IP65, this version is designed for compact wall-mounted measuring points in indoor and protected outdoor areas. This version is intended for wall-mounted temperature measurements and is especially useful where the sensor is protected inside the housing while requiring a robust outer enclosure. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of the JUMO Wall-Mounted Resistance Thermometer compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt100 sensor for proven temperature measurement suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version particularly interesting for measuring points where the temperature is to be recorded directly in the area surrounding the housing without requiring a protruding sensing element. This can be advantageous wherever a compact, closed design is preferred and the sensor should remain better protected against mechanical influences. With protection class IP65, this version provides significantly greater protection against dust and water than standard room sensors. This makes it suitable for environments where the housing is exposed to higher levels of stress or where a higher protection rating is required. Especially in HVAC technology, this can be beneficial for installations in more technically demanding environments. Temperature measurement is performed using a Pt100 sensor in a two-wire circuit. This proven sensor configuration is suitable for many standard measurement tasks in temperature measurement technology. Since no transmitter is integrated, this version is particularly well suited for applications where the sensor is connected directly to a suitable control or evaluation unit. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Applications with increased protection requirements against dust and water Heating, ventilation, and air conditioning systems

Wall-Mounted Resistance Thermometer by JUMO with Pt1000 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1005-1/000 This wall-mounted resistance thermometer from JUMO is suitable for HVAC temperature measurements with a compact housing design. Equipped with Pt1000 in a two-wire circuit and a measuring range of -30 to +90 °C, this version is designed for wall-mounted measuring points in indoor and protected outdoor areas. This version is suitable for wall-mounted measuring points where the sensor should be protected inside the housing while a Pt1000 signal is required. With an operating range of -30 to +90 °C and protection class IP65, this wall-mounted resistance thermometer is particularly suitable for HVAC applications in indoor and protected outdoor areas. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt1000 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of this JUMO Thermometer Version compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt1000 sensor for compatible control and evaluation systems suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version especially interesting wherever the temperature should be measured directly around the housing without requiring a separate protruding sensing element. This creates a compact design and is particularly practical where a discreet, closed solution is preferred. Unlike Pt100 versions, this model operates with 1 x Pt1000 in a two-wire circuit. This is particularly useful when the connected control or evaluation system is designed for Pt1000 or when this sensor configuration is preferred. Since no transmitter is integrated, the device is especially suitable for applications where the sensor should be connected directly to a compatible evaluation unit. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments where standard room sensors are not sufficient and a more robust housing is required. Especially in HVAC technology, this can be an advantage for wall-mounted installations in technically demanding areas. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Heating, ventilation, and air conditioning systems

Room, outdoor and duct resistance thermometers Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

Wall-Mounted Resistance Thermometer with Pt100 without Transmitter and Measuring Range -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube and Protection Class IP65, Type: 902520/23-573-1003-1/000 The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with a spatially separated measuring point. Equipped with Pt100 in a two-wire circuit and a measuring range of -30 to +90 °C, this version is particularly suitable for measurements where the temperature should not be recorded directly inside the housing but closer to the actual measuring point via a remote protection tube. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of this Wall-Mounted Resistance Thermometer remote protection tube for more targeted temperature measurement IP65 protection class for increased housing protection requirements well suited for wall-mounted measuring points with a spatially separated measuring location robust design for indoor and protected outdoor areas The remote protection tube is the key distinguishing feature of this version. It allows the temperature to be measured more precisely at the desired location while the housing remains mounted separately on the wall. This is especially practical when the measuring point is not located directly at the housing installation position or when some structural distance is required. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments requiring more robust protection than standard room sensors. Especially in HVAC applications, this is an advantage for wall-mounted installations in technically demanding environments. Temperature measurement is performed using a Pt100 sensor in a two-wire circuit. This proven sensor configuration is suitable for many standard measuring tasks in temperature measurement technology. Since no transmitter is integrated, this version is especially suitable for applications where the sensor should be connected directly to a compatible control or evaluation unit. Typical Applications Wall-mounted measuring points in HVAC applications Temperature monitoring with a slightly remote measuring point Heating, ventilation, and air conditioning systems Technical indoor areas Protected outdoor areas

Wall-Mounted Resistance Thermometer with Pt1000 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 Type: 902520/23-573-1005-1/000 The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with a spatially separated measuring point. Equipped with Pt1000 in a two-wire circuit, a measuring range of -30 to +90 °C, a remote protection tube, and protection class IP65, this version is designed for wall-mounted measuring points where the actual measuring location is not directly inside the housing but is detected via a remote protection tube. It is particularly suitable for HVAC applications in indoor and protected outdoor areas. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt1000 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of the JUMO Wall-Mounted Resistance Thermometer remote protection tube for more targeted temperature measurement Pt1000 sensor for compatible control and evaluation systems IP65 protection class for increased housing protection requirements well suited for wall-mounted measuring points with a spatially separated measuring location The remote protection tube makes this version especially useful where the temperature should not be measured directly at the wall surface but with some distance from it. This allows the sensor to be positioned more precisely at the relevant measuring point while the housing remains mounted separately. This is particularly practical when the measuring point is structurally not located directly at the installation position of the housing. Unlike Pt100 versions, this model operates with 1 x Pt1000 in a two-wire circuit. This is especially beneficial when the connected control or evaluation system is designed for Pt1000 or when this sensor configuration is preferred. Since no transmitter is integrated, the device is particularly suitable for applications where the sensor should be connected directly to a compatible evaluation unit. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments where a more robust wall-mounted solution is required than standard room sensors. Especially in technically demanding HVAC environments, this is a clear advantage. Typical Applications Wall-mounted measuring points in HVAC applications Temperature monitoring with a slightly remote measuring point Heating, ventilation, and air conditioning systems Technical indoor areas Protected outdoor areas

Wall-Mounted Resistance Thermometer by JUMO with Pt100 and Analog Transmitter with Measuring Range -30 to +60 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 Type: 902520/23-474-1003-1/330,(-30..60°C) The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with direct analog signal transmission. Equipped with Pt100 in a two-wire circuit, an integrated 4 to 20 mA transmitter, and a measuring range of -30 to +60 °C, this version is particularly suitable for wall-mounted measuring points where the temperature value should not only be measured but also transmitted directly as a standard analog signal. The wall-mounted resistance thermometer is equipped with a remote protection tube. This makes the version especially interesting for HVAC applications where the measuring point is located at some distance from the housing and the signal should be transferred directly to a control or regulation system. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: 1 x analog, output 4 to 20 mA Measuring range: -30 to +60 °C Note: Measuring range only in combination with transmitter Protection class: IP65 Advantages and Technical Features remote protection tube for more targeted temperature measurement integrated 4 to 20 mA transmitter for direct signal transmission well suited for wall-mounted measuring points with a spatially separated measuring location suitable solution for building automation and HVAC applications no additional external signal conversion required The remote protection tube is an important advantage of this version. It enables the temperature to be measured closer to the actual measuring point while the housing remains mounted separately on the wall. This is especially practical when the temperature should not be measured directly at the housing location but with some distance from it. In addition, the integrated transmitter with a 4 to 20 mA output allows the temperature signal to be processed directly as a standardized current signal. Especially in building automation, HVAC systems, and other technical applications, this is beneficial when no additional external transmitter is planned on the system side. The relevant measuring range for this version is -30 to +60 °C and applies in combination with the transmitter. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for technically demanding environments where a more robust wall-mounted solution is required than standard room sensors can provide. Typical Applications Wall-mounted measuring points in HVAC applications Building automation Heating, ventilation, and air conditioning systems Applications with direct signal transmission to controllers or control systems Measuring points with a slightly remote measuring location

Wall-Mounted Resistance Thermometer by JUMO with Pt100 and Analog Transmitter with 0 to 10 V Output for Measuring Range -30 to +60 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 Type: 902520/23-474-1003-1/333,(-30..60°C) The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with direct voltage output. Equipped with Pt100 in a two-wire circuit, an integrated 0 to 10 V transmitter, and a measuring range of -30 to +60 °C, this version is particularly suitable for robust wall-mounted measuring points with a separated measuring location. This version is intended for wall-mounted measuring points where the temperature should be measured at a location slightly separated from the housing and transmitted directly as a voltage signal. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: 1 x analog, output 0 to 10 V Measuring range: -30 to +60 °C Note: Measuring range only in combination with transmitter Protection class: IP65 Advantages and Technical Features remote protection tube for more targeted temperature measurement well suited for wall-mounted measuring points with a spatially separated measuring location suitable solution for building automation and HVAC applications no additional external signal conversion required The remote protection tube is a clear advantage because the actual measuring point does not need to be located directly at the housing position. This allows the temperature to be measured more precisely where it is truly relevant for the application. This is especially practical for wall mounting when a small distance between the housing and the measuring location is beneficial or structurally required. In addition, the integrated transmitter with a 0 to 10 V output provides the temperature signal directly as a voltage signal and allows further processing without additional external signal conversion. Especially in building automation and HVAC applications, this is beneficial when the system operates with 0 to 10 V inputs. The measuring range relevant for this version is -30 to +60 °C and applies in combination with the transmitter. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for technically demanding environments where a more robust wall-mounted solution is required than standard room sensors. Typical Applications Wall-mounted measuring points in HVAC applications Building automation Heating, ventilation, and air conditioning systems Applications with direct signal transmission to controllers or control systems Measuring points with a slightly remote measuring location Technical indoor areas and protected outdoor areas Applications with increased protection requirements against dust and water

Wall-Mounted Resistance Thermometer by JUMO with Pt100 and Integrated Transmitter with 4–20 mA and Measuring Range -40 to +80 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 Type: 902520/23-474-1003-1/330,(-40..80°C) The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with direct analog signal transmission. Equipped with Pt100 in a two-wire circuit, an integrated 4 to 20 mA transmitter, and a measuring range of -40 to +80 °C, this version is particularly suitable for robust wall-mounted measuring points with a separated measuring location. This version is designed for wall-mounted measuring points where the temperature value should be recorded at a location slightly removed from the housing and transmitted directly as a current signal. For this purpose, the version is equipped with a remote protection tube. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: 1 x analog, output 4 to 20 mA Measuring range: -40 to +80 °C Note: Measuring range only in combination with transmitter Protection class: IP65 Advantages and Technical Features of this Wall-Mounted Resistance Thermometer remote protection tube for more targeted temperature measurement well suited for wall-mounted measuring points with a separated measuring location no additional external signal conversion required suitable for applications with an extended temperature range up to +80 °C The remote protection tube offers a clear advantage: the sensor can be positioned closer to the actual measuring point while the housing remains mounted separately on the wall. This is practical wherever temperature values should not be measured directly at the housing position but require a small distance from the actual measuring location. In addition, the integrated 4 to 20 mA transmitter provides the temperature signal immediately as a common analog output signal and allows direct connection to suitable controllers or control systems. Especially in building automation and HVAC applications, this is useful when no additional external signal conversion is planned. The associated measuring range is -40 to +80 °C and applies to this version in combination with the transmitter. The housing design is also intended for more demanding installation environments. With protection class IP65, the device is well protected against dust and water. This makes the version particularly suitable for wall-mounted measuring points in technically demanding indoor areas or protected outdoor areas. Typical Applications Wall-mounted measuring points in HVAC applications Building automation Heating, ventilation, and air conditioning systems Measuring points with a slightly remote measuring location Technical indoor areas and protected outdoor areas

Wall-Mounted Resistance Thermometer by JUMO with Pt100 and Analog Transmitter with 0 to 10 V and Measuring Range -40 to +80 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with direct voltage output. Equipped with Pt100 in a two-wire circuit, an integrated 0 to 10 V transmitter, and a measuring range of -40 to +80 °C, this version is suitable for wall-mounted measuring points where the temperature is measured at a point separated from the housing and transmitted directly as a voltage signal. For this purpose, the wall-mounted resistance thermometer is equipped with a remote protection tube. This makes the version particularly suitable for HVAC applications where direct integration into compatible control and regulation systems is required. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: 1 x analog, output 0 to 10 V Measuring range: -40 to +80 °C Note: Measuring range only in combination with transmitter Protection class: IP65 Advantages and Technical Features of the Wall-Mounted Resistance Thermometer remote protection tube for more targeted temperature measurement direct 0 to 10 V signal for controllers and control systems well suited for wall-mounted measuring points with separated measuring locations IP65 protection class for increased housing protection requirements no additional external signal conversion required The remote protection tube makes this version especially interesting when the measuring point should not be located directly at the housing. This allows the temperature to be measured closer to the actual measuring location while the housing remains mounted separately on the wall. This is especially practical for applications where the housing position and measuring location are not identical. In addition, the version features an integrated 0 to 10 V transmitter. This means the temperature signal is available directly as a voltage signal and can be processed further without additional external signal conversion. Especially in building automation and HVAC applications, this is beneficial when controllers or control systems are designed for 0 to 10 V input signals. The associated measuring range is -40 to +80 °C and applies in combination with the transmitter. Typical Applications Wall-mounted measuring points in HVAC applications Building automation Heating, ventilation, and air conditioning systems Measuring points with a slightly remote measuring location

Push-in resistance thermometer with straight connection cable, stainless steel protection tube  Temperature measuring range: -50 ... +260 °C / Silicon  Measuring insert: 1x Pt 100 in two-wire circuit  Installation length: 45 mm  Cable length: 2500 mm  Tolerance class: Class B (standard)  Thermowell diameter: 6 mm  Wire end ferrules  Extra code: with bend protection, cable shielded  Available as single and dual resistance thermometers  Available in straight and angled versions to meet different mounting requirements.  Flexible connection cables  Strain relief to protect against mechanical stress  Meets SIL and PL qualification standards for maximum safety  Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.