Our flow cell kit is a simple and economical means of mounting pH and ORP electrodes for inline applications. Compatible with all 12 mm electrodes.

Manufacturer number: 3014046710The flat platinum sensor at the tip allows measurement of samples with small volumeWaterproofCombined electrode

Manufacturer number: 3200922105The flat platinum sensor at the tip allows measurement of samples with small volumeWaterproofNot refillableCombined electrode

The Horiba LAQUA 300 BNC adapter is designed to act as an adapter for connecting an ion-selective electrode to the corresponding Smart Sensor module, which is fitted with a cable for connection to a HORIBA Laqua 300 series analyser. HORIBA BNC Adapter 300-BNC – Maximum flexibility for your HORIBA Laqua WQ300 analysers The HORIBA BNC Adapter 300-BNC is the ideal solution if you wish to flexibly expand your HORIBA Laqua WQ300 analysers and easily connect a wide variety of electrodes for immediate use. Whether in the laboratory, in water analysis or in industrial quality control – with this adapter, you can create a universal connection between the measuring instrument and the electrode, significantly expanding the range of applications for your measurement technology. Universal compatibility – Greater freedom in electrode selection With the HORIBA 300-BNC Adapter, you are no longer restricted to manufacturer-specific sensors. The adapter stands out because it can connect not only HORIBA-specific electrodes but also electrodes from other manufacturers, provided they have a BNC connector. The inclusion of a second input in the form of a RCA connector also enables the transmission of temperature data, supporting temperature-compensated measurement and display. Compatibility includes: 3-in-1 / combination pH electrodes and the pH sensor heads 300PH-2 / 300PH-5 3-in-1 / combination ORP electrodes and the ORP sensor head 300-O-2 Combination ion-selective electrodes (ISEs) and the ion sensor head 300-I-2 Thanks to an additional phono/RCA connector, temperature data can also be transmitted – for precise, temperature-compensated measurements. Which Horiba ion-selective electrodes is the adapter compatible with? 895882 Horiba 6560S-10C, chloride ion (Cl-) electrode 895883 Horiba 6561S-10C, fluoride ion (F-) electrode 895880 Horiba 5002S-10C, Ammonia (NH3) ion electrode with 3x membrane cap Your benefits at a glance Extended measurement capabilities: Use a wide variety of electrodes and measure a multitude of parameters – from pH and redox to specific ions. Manufacturer-independent flexibility: Choose the best electrode for your application – regardless of the manufacturer. Precise measurement results: Thanks to temperature compensation, you obtain reliable and reproducible results, even under changing conditions. Easy to use: The adapter allows electrodes to be connected quickly and easily to the WQ300 series measuring instruments. This saves time and optimises use in the laboratory and in the field. Quick connection, secure fit and ready for immediate use – ideal for laboratory and field use. Typical applications The HORIBA BNC Adapter 300-BNC is perfect for: Water analysis & environmental monitoring Research & development laboratories Food and beverage industry Chemical and pharmaceutical industry Quality assurance & production control Whether you are measuring pH values, determining redox potentials or analysing ion concentrations – this adapter turns your measuring instrument into a universal analysis platform. It is particularly useful for users who need a flexible solution to carry out a wide range of measurements with their existing HORIBA WQ300 measuring instruments. The 300-BNC adapter significantly expands the range of applications for the WQ300 series and enables cross-manufacturer compatibility in the field of electrochemical measurements. Why buy the HORIBA 300-BNC adapter? If you already own a HORIBA Laqua WQ300 meter, this adapter is an essential accessory for: continuing to use your existing electrodes saving on the cost of new sensor systems significantly expanding your measurement capabilities The HORIBA 300-BNC adapter transforms your HORIBA Laqua WQ300 series analysers into an open and flexible measurement system for a wide range of applications. Benefit from maximum compatibility, precise measurement results and easy integration into existing measurement processes.

ORP cable with digital sensor head to mount the "300-O-C ORP electrode".  Manufacturer Part Nr. :   3200812204 (2 metres 300-O-2)  3200923561 (5 metres 300-O-5)

300-O-C ORP sensor cartridge Manufacturer article number: 3200922104

It is particularly suitable wherever a fixed installation with Pg13.5 thread, a direct BNC connection, and a robust, service-life-optimized redox measurement are required. JUMO BlackLine Redox plastic shaft electrode with salt bridge, 2 meter fixed cable with BNC connector and fixed protective cage, Pg13.5 (Type code: 201010/65-22-65-2000-76-120/837; Part No.: 00424950) This JUMO BlackLine Redox electrode is the right choice when a robust, permanently installable, and ready-to-connect solution for redox measurements in aqueous media is required. The Pg13.5 screw head allows secure installation in suitable fittings or measurement points, while the pre-attached 2 meter fixed cable with BNC connector enables direct connection to compatible measuring instruments. This makes this version especially convenient for users who want a reliable redox electrode without additional wiring effort. Advantages For redox measurement, the electrode is equipped with a robust platinum tip, which provides reliable measurement values and is easy to clean. This is a clear advantage in applications where redox values must be monitored regularly. The fixed protective cage additionally protects the sensitive sensor area and improves suitability for everyday use, especially at measurement points where the sensor may be exposed to higher mechanical stress. Another advantage is the integrated salt bridge. It is particularly useful when measuring in low-ion media or at higher flow rates. In such cases, it can help extend the electrode’s service life. This makes it a strong choice for users who are looking for more than a standard redox electrode and need a version suitable for more demanding operating conditions. Technical data The reference system with polymerized KCl gel electrolyte is suitable for many general water applications. The proven cartridge reference system helps keep the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. An integrated temperature sensor is not available in this series. The 120 mm insertion length makes the electrode suitable for many common installation situations. Typical applications Drinking water monitoring Water treatment, swimming pools, aquatics Greenhouse technology as well as lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

It is particularly useful wherever a robust, ready-to-connect, and service-life-optimized redox measurement is required, for example in drinking water monitoring or aquatics. JUMO BlackLine Redox plastic shaft electrode with salt bridge, 2 meter fixed cable without thread with BNC connector and fixed protective cage (Type code: 201010/65-22-45-2000-76-120/837; Part No.: 00417301) This version of the JUMO BlackLine Redox electrode is a good choice when a robust and ready-to-connect solution for redox measurement in aqueous media is required. Thanks to its permanently attached 2 meter cable with BNC connector, the sensor can be quickly integrated into suitable measurement systems without additional connection cables. This version offers clear advantages, especially in applications where simple installation, a protected sensor design, and easy day-to-day handling are important. Advantages of the JUMO BlackLine electrode For redox measurement, a robust platinum tip is used, which provides reliable measurement values and is easy to clean. This makes the electrode particularly interesting for users who require a sensor for regular measurement tasks while valuing a low-maintenance design. The integrated protective cage additionally protects the sensitive sensor area and is especially useful when the electrode is frequently used, moved, or exposed to more demanding environments. Another advantage of this version is the integrated salt bridge. It is particularly recommended for low-ion media or higher flow rates, as it can help extend the electrode’s service life. This makes it a strong choice for users who are not only looking for a standard redox electrode but for a version suitable for more challenging operating conditions. Technical data The reference system with polymerized KCl gel electrolyte is suitable for many general water applications and supports reliable measurement in aqueous media. An integrated temperature sensor is not available in this series. With a standard insertion length of 120 mm and a head design without thread, this version is particularly suitable for applications where direct cable connection via BNC connector is preferred. Typical applications Drinking water monitoring and water treatment Swimming pools, aquatics, greenhouse technology Lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

This electrode is particularly suitable for applications where a good price-performance ratio, easy handling, and stable measurement values are required. JUMO ecoLine glass shaft ORP electrode, platinum tip and S8 Pg13.5 screw head (201010/51-22-22-0000-00-120/000; Part No. 00413906) The JUMO ecoLine glass shaft ORP electrode with platinum tip and S8 Pg13.5 screw head is a cost-effective solution for reliable redox (ORP) measurements in general aqueous media. Design of the ORP electrode The robust platinum tip ensures reliable redox measurement and is also easy to clean. In combination with the ceramic diaphragm and the polymerized KCl gel electrolyte, the electrode is well suited for many typical water applications. The proven JUMO cartridge reference system keeps the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. Typical applications With a measuring range of ±2000 mV, the S8 Pg13.5 screw head, and a standard insertion length of 120 mm, this version is suitable for many common installation situations. A temperature sensor is not available in the ecoLine series, making this electrode ideal for applications where integrated temperature measurement is not required. Drinking water monitoring and water treatment Swimming pools Aquatics Greenhouse technology as well as lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Suitable for use in portable measuring devices Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths as well as biotech and sterilization processes

With an S8 Pg13.5 screw head and a 120 mm insertion length, the electrode can be integrated into many common measurement tasks. It is used in a wide range of applications such as drinking water monitoring or swimming pools. JUMO ecoLine Redox plastic shaft electrode with S8 Pg13.5 screw head and attachable protective cage (201010/53-22-22-0000-00-120/000; Part No. 00357020) The JUMO ecoLine Redox plastic shaft electrode is designed for reliable redox measurements in general aqueous media and offers a cost-effective solution for many standard applications. Thanks to its PEI plastic shaft and attachable protective cage, this version is particularly suitable for practical use with portable measuring devices or wherever additional sensor protection is required in everyday operation. For redox measurement, a robust platinum tip is used, which ensures stable measurement values and is easy to clean. The electrode is complemented by a proven reference system with a polymerized KCl gel electrolyte, which is well suited for general water applications. The JUMO cartridge reference system helps keep the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. Typical applications Drinking water monitoring and water treatment Swimming pools, aquatics, greenhouse technology Lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Environmental applications Beverage and food industry Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

Brief description The high-quality materials and components of the JUMO tecLine HD electrodes make them particularly suitable for the most demanding applications in process and industrial measurement technology. They are combined combination electrodes (with a reference electrode and a glass or metal electrode in a shaft).Depending on the design, it is possible to integrate an additional Pt1000 temperature sensor.Insensitive to large amounts of dirt as well as processes and waste water rich in oil and grease. For processes with a high solids content (e.g. waste water with sand particles or media that are subject to precipitation or crystallisation reactions), a perforated diaphragm variant is available as the optimum solution. JUMO tecLine HD electrodes represent the latest technology for pH and redox electrodes. Each electrode is a high-quality product that is individually unit-tested and comes with a calibration certificate. Modern production facilities guarantee constant values.All conventional electrodes are made from physiologically safe and FDA-listed materials.Their shaft glass is lead-free and therefore RoHS 2 compliant. Translated with DeepL.com (free version)

High-quality industrial electrodesProcess/industrial applicationswith gold tipdifferent insertion lengthsspecial types on requestSelected version:Basic type: JUMO tecLine redox combination electrode, glass shaftActive part: platinum capDiaphragm: 1x zirconium dioxideElectrical connection to electrode: screw head Pg13.5 (S8)Insertion length: 120mm (standard)Extra codes: Salt reserveOrder code: 201025/51-22-07-22-120/837

High-quality industrial electrodesProcess/industrial applicationswith gold tipdifferent insertion lengthsspecial types on requestSelected version:Basic type: JUMO tecLine redox combination electrode, glass shaftActive part: gold capDiaphragm: 1x zirconium dioxideElectrical connection to electrode: screw head Pg13.5 (S8)Insertion length: 120mm (standard)Extra codes: Salt reserveOrder code: 201025/51-32-07-22-120/837

If you are looking for a redox electrode designed for challenging media, robust process conditions, and a durable long-life configuration, this JUMO tecLine version is an excellent choice. JUMO tecLine redox electrode with glass shaft, platinum tip, PTFE ring, Pg13.5 screw head (S8), 120 mm and salt reservoir This redox electrode is designed for demanding redox measurements in water and aqueous media. It is particularly suitable for applications where the sensor must operate reliably under more difficult process conditions. The combination of glass shaft, platinum tip, PTFE ring diaphragm, Pg13.5 screw head (S8), 120 mm immersion length, and salt reservoir makes this version suitable for professional use in contaminated media and significantly more robust than basic standard solutions. Technical data Basic type: glass shaft Active element: platinum tip Redox measuring range: ±2000 mV Temperature range: -5 to +90 °C Diaphragm: PTFE ring Electrical connection: Pg13.5 screw head (S8) Reference system: cartridge reference system Immersion length: 120 mm Type extension: salt reservoir Advantages and special features A key advantage of this version is its suitability for media containing dirt, solid particles, or oil-based components that can interfere with measurement. The PTFE ring diaphragm is specifically designed for such demanding conditions and offers advantages over more sensitive standard diaphragm designs. This makes the electrode particularly attractive for users who require a reliable and durable redox measurement solution in industrial environments. Why choose this electrode? This version is especially suitable when the measuring point must remain reliable even in difficult media conditions. The platinum tip is designed for redox measurements up to ±2000 mV and is suitable for a wide range of industrial applications. The glass shaft provides a proven and process-suitable design, while the salt reservoir can help extend service life in low-conductivity media. This is particularly beneficial in applications where frequent maintenance or replacement is not desirable. The Pg13.5 screw head (S8) ensures compatibility with many standard measurement systems. With a 120 mm immersion length, the electrode fits into a wide range of common installation situations. Combined with the cartridge reference system, this results in a well-designed solution for processes requiring robust redox measurement and reliable long-term operation. Typical applications industrial wastewater treatment general process monitoring electroplating industry paper industry beverage industry oily wastewater, suspensions, paints, and media with solid particles fluoride-containing media up to 1000 mg/l HF

High-quality industrial electrodesProcess/industrial applicationswith gold tipdifferent insertion lengthsspecial types on requestSelected version:Basic type: JUMO tecLine redox combination electrode, PEI plastic with protective cageActive part: Platinum domeDiaphragm: 1x glass fiberElectrical connection to electrode: screw head Pg13.5 (S8)Fitting length: 120mm (standard)Extra codes: Salt reserve, double chamber KCI/KCIOrder code: 201025/72-22-05-22-120/837, 838

Connection cable for pH/redox Length: 3 metres Cable type: pH and redox connection cable Ø 5 mm, 75 °C Connection end 1 (sensor side): rotatable cable socket Connection end 2 (device side): without Electronic sensors for analysing liquids require special connection cables and plug connectors. The following applies in principle: The connection between an electrochemical sensor and the transmitter/indicator/controller should be as short as possible. Normally, the cable length is 5 to 10 metres to ensure a high level of functional reliability. If longer cable lengths are required in exceptional cases, the technical documentation for the sensors and measuring devices should be consulted. The cable between the sensor and the analyser must be laid directly, without interruptions such as terminal strips or cable extensions. pH and redox measurement Special coaxial cables with a special design are used for pH and redox measurement. During these measurements, the sensor generates low-intensity DC voltages which are transmitted to the analyser. Due to the sometimes very high internal resistance (potentiostatic measuring principle with internal resistances of up to several gigaohms), these measurements are extremely sensitive to electrical interference and the effects of radiation. Under unfavourable conditions, even minimal movements of the cable can lead to measurement value distortions. An additional insulation layer of the JUMO coaxial cable increases the insulation resistance, which enables a secure connection of the sensor to the transmitter. Conventional coaxial cables from the antenna and computer sector are not suitable for this application and can damage the sensors. This can lead to immediate failure of the sensor as well as a shortened service life. For multiple sensors, for example with integrated temperature sensors, coaxial cables with single wires are available, such as the Variopin (VP).

Connection cable for pH/redox Length: 3 metres Cable type: pH and redox connection cable Ø 5 mm, 75 °C Connection end 1 (sensor side): rotatable cable socket Connection end 2 (device side): without Electronic sensors for analysing liquids require special connection cables and plug connectors. The following applies in principle: The connection between an electrochemical sensor and the transmitter/indicator/controller should be as short as possible. Normally, the cable length is 5 to 10 metres to ensure a high level of functional reliability. If longer cable lengths are required in exceptional cases, the technical documentation for the sensors and measuring devices should be consulted. The cable between the sensor and the analyser must be laid directly, without interruptions such as terminal strips or cable extensions. pH and redox measurement Special coaxial cables with a special design are used for pH and redox measurement. During these measurements, the sensor generates low-intensity DC voltages which are transmitted to the analyser. Due to the sometimes very high internal resistance (potentiostatic measuring principle with internal resistances of up to several gigaohms), these measurements are extremely sensitive to electrical interference and the effects of radiation. Under unfavourable conditions, even minimal movements of the cable can lead to measurement value distortions. An additional insulation layer of the JUMO coaxial cable increases the insulation resistance, which enables a secure connection of the sensor to the transmitter. Conventional coaxial cables from the antenna and computer sector are not suitable for this application and can damage the sensors. This can lead to immediate failure of the sensor as well as a shortened service life. For multiple sensors, for example with integrated temperature sensors, coaxial cables with single wires are available, such as the Variopin (VP).

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

The modular ORP measuring package consists of a 3 m connection cable, a Modbus head transmitter, the sensor holder and the ORP flat-head electrode. Due to the construction of the sensor only the ORP electrode has to be replaced. All other components of this system can be used continuously. For an optimal process integration the NeoTec Sensor is delivered with a fitting T-piece. Advantages:preconfigured for NeoTecMaster® modular design industry standard resource friendly