JUMO miro TRON - electronic thermostat with PID two-point controller option  Input: 1 resistance thermometer Pt100, Pt1000 in two-wire circuit, 1 digital input Output: 1 relay (changeover contact AC 250 V, 10 A) and  1 relay (NO contact AC 250 V, 5 A), resistive load Power supply: AC 230 V+10/-15%, 48 bis 63 Hz Version: Standard version Extra code: without The electronic thermostat is used as a heating or cooling thermostat, but can be optionally extended with a PID two-point controller option. The device offers user-friendly operation, characterised by a clear structure and supporting texts in German, English, French and Spanish. Process values, texts and parameters are displayed on two 18-segment LCD displays. Additional display elements provide information on the switching positions of the outputs, the status of the timer and the temperature unit used. PCB terminals with push-in technology enable quick electrical installation. Operation, parameterisation and configuration are carried out via a membrane keypad with four buttons. PID two-point controller (optional)If the PID two-point controller option is selected, various controller structures are available, including P, I, PH, PI and PID, which also enable self-optimisation. In addition, the setup programme offers a start-up function and a display of the online parameters. Inputs and outputsThe required analogue input can be selected when ordering:  Resistance thermometer Thermocouple Current (4 to 20 mA) Voltage (0 to 10 V) There is also a digital input for connecting a potential-free contact (not for resistance thermometers in three-wire circuit). Depending on the device type, the following combinations are available as outputs: 2 relays (1 changeover contact, 1 NO contact), or 1 relay (NO contact) and 1 digital output DC 0/14 V, or 4 relays (NO contact). USB device interfaceThe device has a Micro-B socket, which is intended for connection to a PC for configuration with the setup programme. No separate power supply is required during configuration via the USB interface (USB-powered). Electrical connectionThe electrical connection is made in a time-saving manner using spring-loaded terminals (push-in technology) Self-optimisationSelf-optimisation (oscillation method) makes it possible even for users with no knowledge of control technology to adapt the controller to the controlled system. The reactions of the controlled system to changes in the manipulated variable are analysed and certain controller parameters are calculated. Limit value monitoringThe device has three limit value monitors, each of which offers eight configurable alarm functions. Any analogue signal is selected from a selector as the value to be monitored. The limit values can be defined either as an absolute value or as a different analogue signal. Additional functions:  On/off delay Wiper function Alarm suppression during the switch-on phase or when parameters are changed Alarm latching Latching with acknowledgementare available. Comprehensive alarm and limit value functions can be realised with limit value monitoring. TimerOnce the timer has been activated, a signal is emitted for the preset runtime, which can be inverted. The timer can also be started after a lead time has elapsed or a tolerance limit has been reached. After the timer has elapsed, an end signal can be generated that is either limited in time or can be deactivated by acknowledgement. The timer makes it possible, for example, to realise a time-controlled setpoint changeover. Service counterThe service counter can either count the number of switching operations of a binary signal or measure its switch-on duration. As soon as the adjustable limit value is reached, a binary signal is activated that must be acknowledged. An operating hours counter is also available, which records the operating time of the device. Setup programmeThe optional setup programme allows the user to configure the device easily and conveniently via a PC. With this programme, data can be created, edited, transferred to the device and read out from there. It also offers a recording function for commissioning (start-up). Customer-specific linearisationIndividual linearisation according to customer requirements makes it possible to use sensor signals with special characteristics. Programming is carried out in the setup programme either using your value table with up to 40 value pairs or using a formula (4th order polynomial)

JUMO miroTRON – electronic thermostat with up to 4 relays (Type: 701081/0-01-24-02/000) This version of the electronic thermostat JUMO miroTRON is designed for more demanding control tasks and, with its four relay outputs, offers particularly flexible control of multiple processes. The device is suitable for use as a heating or cooling thermostat and is used wherever multiple switching functions are required simultaneously – for example for controlling system components or combining control and monitoring tasks. In this version, temperature measurement is carried out using resistance thermometers (Pt100 or Pt1000 in a two-wire circuit). In addition, a digital input is available for integrating external signals. The display of measured values and parameters is carried out via two clear 18-segment LCD displays. Additional status indicators show the status of the relays, active functions, and the selected temperature unit at all times. Operation is performed via a membrane keypad with four buttons. Thanks to clearly structured menus and multilingual user guidance, fast and secure parameterization is possible. Push-in terminals are integrated for installation, enabling simple and time-saving wiring. Features of this device variant Input for Pt100 / Pt1000 (two-wire circuit) Additional digital input 4 relay outputs (normally open contact, AC 250 V, 2.5 A) Power supply: AC 230 V (+10 / -15 %), 48–63 Hz Two-line LCD display with status indicators Operation via membrane keypad Push-in connection technology Functions and application possibilities Thanks to the four relay outputs, the device is particularly suitable for applications where multiple switching points or functions must be implemented simultaneously. Optionally, the thermostat can be expanded with PID two-point control, allowing more precise adaptation to the specific application. The following functions are available for operation: Limit value monitoring with various alarm functions Timer function for implementing time-controlled processes Service counter for monitoring switching operations and operating times USB interface & configuration The device features an integrated USB interface (Micro-B) for connection to a PC. Configuration is carried out using the optional setup program. No separate power supply is required during parameterization. The setup program enables: Easy parameterization and data transfer Reading of device settings Support during commissioning Special features of the JUMO miroTRON with up to 4 relays Up to four relay outputs for flexible control tasks Ideal for applications with multiple switching functions Easy operation and quick installation Optionally expandable with PID control including self-optimization Frequently Asked Questions What is the JUMO miroTRON with 4 relays suitable for? It is suitable for temperature control and monitoring applications where multiple devices or switching functions need to be controlled simultaneously. Which temperature probes can I connect? The device supports Pt100 and Pt1000 temperature probes in a two-wire circuit. Can it be set up without prior knowledge? The clear display, intuitive menus, and simple button operation make setup significantly easier. How complex is the electrical connection? Thanks to push-in terminals, wires can be connected quickly and with minimal installation effort. Can I adjust the settings via a computer? Yes, settings can be conveniently configured on a PC using the integrated USB interface and the optional setup program. Why should I choose the version with 4 relays? It offers greater flexibility when multiple switching tasks or system components need to be controlled simultaneously. Can I configure time-controlled actions? Yes, the timer enables time-controlled signals and setpoint switching.

Resistance thermometer for outdoor temperature measurements with Pt1000 in two-wire configuration and measuring range -50 to +90 °C JUMO outdoor resistance thermometer tolerance class B and IP65 protection class Type: 902520/15-361-1005-1/000 The resistance thermometer is suitable for temperature measurements outdoors and in technically demanding environments. With Pt1000 in two-wire configuration and a measuring range from -50 to +90 °C, this version is designed for reliable outdoor temperature measurements in HVAC applications. With IP65 protection class, the housing is well protected against dust and water. Technical Data Design: Outdoor resistance thermometer Measuring insert: 1 x Pt1000 Circuit type: Two-wire configuration Transmitter: none Operating temperature: -50 to +90 °C Protection class: IP65 Tolerance class: Class B Advantages and technical features of the JUMO outdoor resistance thermometer well suited for outdoor temperature measurements IP65 protection class for increased housing requirements Pt1000 sensor for compatible control and evaluation systems usable at temperatures from -50 to +90 °C direct integration without integrated transmitter suitable solution for HVAC applications outdoors robust design for changing environmental conditions Especially in outdoor environments, it is important that the sensor operates reliably even under changing weather and environmental conditions. The IP65 protection class makes this version particularly suitable for such requirements. This makes it interesting wherever temperatures need to be measured outside buildings or in more demanding technical environments. Instead of a Pt100, this version uses a Pt1000 sensor in two-wire configuration. This is especially useful when the connected control or evaluation system is designed for Pt1000 or when this sensor version is preferred. Since no transmitter is integrated, the thermometer is particularly suitable for applications where the sensor should be connected directly to a suitable evaluation unit. With a measuring range from -50 to +90 °C, this version covers both low outdoor temperatures and warmer operating conditions. Typical Areas of Application outdoor temperature measurement on buildings HVAC applications heating, ventilation and air conditioning systems technical outdoor environments measuring points with increased protection requirements against dust and water temperature monitoring in weather-exposed environments Frequently Asked Questions Can I use the thermometer outdoors? Yes, it was specifically designed for both indoor and outdoor use. What temperature range is the thermometer suitable for? It reliably measures temperatures from -50°C to +90°C. What are the benefits of the IP65 rating? It protects the device against dust and water jets. Can I also use the thermometer in air ducts? Yes, it is suitable for temperature monitoring in air ducts. Is the thermometer suitable for heating and air conditioning systems? Yes, it is frequently used in heating, ventilation, and air conditioning systems. Can I connect the sensor directly to my control system? Yes, it is designed for direct connection to compatible systems. Where is this thermometer typically used? For example, in buildings, outdoor areas, and HVAC systems.

JUMO Outdoor Resistance Thermometer with Pt100 in Two-Wire Circuit for Measuring Range -50 to +90 °C JUMO Outdoor Resistance Thermometer Protection Class IP65 - Type: 902520/15-361-1003-1/903 The resistance thermometer is suitable for temperature measurements outdoors and in environments exposed to moisture. Equipped with a Pt100 sensor in a two-wire circuit, a measuring range of -50 to +90 °C, and an IP65 cable gland, this version is designed for reliable outdoor temperature measurement in HVAC applications. With protection class IP65, this version is intended for outdoor temperature measurements and other installation locations where the housing must be reliably protected against dust and moisture. This JUMO outdoor resistance thermometer is therefore particularly suitable for HVAC applications in outdoor environments. Technical Data Version: Outdoor resistance thermometer Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -50 to +90 °C Protection class: IP65 Special feature: Cable gland (IP65) Advantages and Technical Features well suited for outdoor temperature measurements IP65 protection class for increased housing protection requirements IP65 cable gland for protected cable entry An additional advantage of this version is the IP65 cable gland. It supports secure and protected cable entry and is especially useful where the connection point must remain reliably sealed in outdoor or humid environments. This is particularly beneficial for measuring points exposed to weather conditions. For temperature measurement, the device uses a Pt100 sensor in a two-wire circuit. This proven sensor design is suitable for many standard temperature measurement tasks in HVAC technology. Since no transmitter is integrated, this version is well suited for applications where the sensor is connected directly to compatible evaluation or control systems. With a measuring range of -50 to +90 °C, this version covers both low outdoor temperatures and warmer operating conditions. This makes it suitable for applications on buildings, in technical outdoor areas, or wherever temperatures need to be monitored under changing environmental conditions. Typical Applications Outdoor temperature measurement on buildings Heating, ventilation, and air conditioning systems Technical outdoor areas Weather-exposed measuring points Applications with protected cable entry Temperature monitoring in environments with increased protection requirements Frequently Asked Questions Can I use the thermometer outdoors? Yes, it was specifically designed for both indoor and outdoor use. What temperature range is the thermometer suitable for? It reliably measures temperatures from -50°C to +90°C. What are the benefits of the IP65 rating? It protects the device against dust and water jets. Can I also use the thermometer in air ducts? Yes, it is suitable for temperature monitoring in air ducts. Is the thermometer suitable for heating and air conditioning systems? Yes, it is frequently used in heating, ventilation, and air conditioning systems. Can I connect the sensor directly to my control system? Yes, it is designed for direct connection to compatible systems. Where is this thermometer typically used? For example, in buildings, outdoor areas, and HVAC systems.

Jumo Outdoor Resistance Thermometer with Pt1000 in Two-Wire Circuit with Operating Temperature -50 to +90 °C JUMO Outdoor Resistance Thermometer Protection Class IP65 Type: 902520/15-361-1005-1/903 This resistance thermometer from JUMO is suitable for temperature measurements outdoors and in environments exposed to moisture. Equipped with a Pt1000 sensor in a two-wire circuit, a measuring range of -50 to +90 °C, and an IP65 cable gland, this version is designed for reliable outdoor temperature measurement in HVAC applications. This version is therefore intended for outdoor temperature measurements where the housing must be reliably protected against dust and moisture. Technical Data Version: Outdoor resistance thermometer Measuring insert: 1 x Pt1000 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -50 to +90 °C Protection class: IP65 Special feature: Cable gland (IP65) Advantages and Technical Features of the JUMO Outdoor Resistance Thermometer well suited for outdoor temperature measurements IP65 protection class for increased housing protection requirements IP65 cable gland for protected cable entry Pt1000 sensor for compatible control and evaluation systems Unlike Pt100 versions, this model operates with 1 x Pt1000 in a two-wire circuit. This is especially useful when the connected control or evaluation system is designed for Pt1000 or when this sensor configuration is preferred. Since no transmitter is integrated, this version is well suited for applications where the sensor is connected directly to compatible evaluation or control systems. A practical advantage is the IP65 cable gland. It ensures protected cable entry and supports reliable sealing of the connection point. This is especially important for outdoor applications or technically demanding environments to ensure reliable measurement performance under changing environmental conditions. Typical Applications Outdoor temperature measurement on buildings Heating, ventilation, and air conditioning systems Technical outdoor areas Weather-exposed measuring points Frequently Asked Questions Can I use the thermometer outdoors? Yes, it was specifically designed for both indoor and outdoor use. What temperature range is the thermometer suitable for? It reliably measures temperatures from -50°C to +90°C. What are the benefits of the IP65 rating? It protects the device against dust and water jets. Can I also use the thermometer in air ducts? Yes, it is suitable for temperature monitoring in air ducts. Is the thermometer suitable for heating and air conditioning systems? Yes, it is frequently used in heating, ventilation, and air conditioning systems. Can I connect the sensor directly to my control system? Yes, it is designed for direct connection to compatible systems. Where is this thermometer typically used? For example, in buildings, outdoor areas, and HVAC systems.

JUMO resistance thermometer for temperature measurements in indoor and outdoor areas as well as air ducts in the measuring range -50 to +90 °C JUMO room, outdoor and duct resistance thermometer IP65 protection class Type: 902520/15-361-1003-1/000 The resistance thermometer with IP65 protection class is suitable for temperature measurements in indoor areas, outdoor environments and air ducts. This version is intended for measuring points that need to operate reliably not only indoors but also in more demanding environments. With a Pt100 in two-wire configuration, an operating range from -50 to +90 °C and IP65 protection class, this resistance thermometer is particularly suitable for HVAC applications where temperature must be measured in rooms, outdoor environments or air ducts. Technical Data Design: Room, outdoor and duct resistance thermometer Measuring insert: 1 x Pt100 Circuit type: Two-wire configuration Transmitter: none Operating temperature: -50 to +90 °C Protection class: IP65 Tolerance class: Class B Advantages and technical features of the JUMO resistance thermometer high IP65 protection class for more demanding environments suitable for rooms, outdoor areas and air ducts wide operating range from -50 to +90 °C robust design for changing environmental conditions The major advantage of this version lies in its higher protection class. IP65 makes it particularly suitable for installation locations where the housing needs better protection against dust and water jets. This makes it well suited for measuring points exposed to greater daily demands or technically more challenging environments than classic room sensors. A Pt100 sensor in two-wire configuration is used for temperature measurement. This proven version is suitable for many common temperature measurement tasks in HVAC applications. Since no transmitter is integrated, this variant is especially useful where the sensor should be connected directly to a suitable control or evaluation unit. The measuring range from -50 to +90 °C further extends the possible applications. This makes the version suitable not only for typical indoor temperatures but also for cooler or warmer environments as found in outdoor areas or air ducts. Typical Areas of Application room temperature measurement in HVAC applications outdoor temperature measurement temperature monitoring in air ducts heating, ventilation and air conditioning systems Frequently Asked Questions Can I use the thermometer outdoors? Yes, it was specifically designed for both indoor and outdoor use. What temperature range is the thermometer suitable for? It reliably measures temperatures from -50°C to +90°C. What are the benefits of the IP65 rating? It protects the device against dust and water jets. Can I also use the thermometer in air ducts? Yes, it is suitable for temperature monitoring in air ducts. Is the thermometer suitable for heating and air conditioning systems? Yes, it is frequently used in heating, ventilation, and air conditioning systems. Can I connect the sensor directly to my control system? Yes, it is designed for direct connection to compatible systems. Where is this thermometer typically used? For example, in buildings, outdoor areas, and HVAC systems.

JUMO resistance thermometer for temperature measurements in indoor and outdoor areas with operating temperature range -20 to +80 °C JUMO room and outdoor resistance thermometer without transmitter with IP54 protection class Type: 902520/11-635-1003-1/000 The resistance thermometer with IP54 protection class is suitable for temperature measurements in indoor and outdoor areas. With Pt100 in two-wire configuration and a measuring range from -20 to +80 °C, this version is designed for HVAC applications with increased protection requirements. This version is intended for temperature measurements where the device should be better protected against environmental influences than standard room sensors. With a Pt100 in two-wire configuration, an operating range from -20 to +80 °C and IP54 protection class, this resistance thermometer is particularly suitable for HVAC applications where temperatures must be measured reliably indoors or outdoors. Technical Data Design: Room and outdoor resistance thermometer Measuring insert: 1 x Pt100 Circuit type: Two-wire configuration Transmitter: none Operating temperature: -20 to +80 °C Protection class: IP54 Advantages and technical features of the JUMO resistance thermometer for indoor and outdoor measurements suitable for indoor and outdoor areas IP54 protection class for better protected installation locations suitable for temperatures from -20 to +80 °C proven Pt100 for classic temperature measurement tasks direct integration without integrated transmitter good solution for HVAC applications with changing environmental conditions more robust design than standard indoor sensors The main difference compared to simpler indoor variants is the more robust protection class. IP54 makes this version suitable for installation locations where dust or splash water may be present. This makes it well suited for applications where the sensor is used not only in protected indoor environments but also in more demanding surroundings. A Pt100 sensor in two-wire configuration is used for temperature measurement. This is a proven solution for many classic measurement tasks in HVAC applications. Since no transmitter is integrated, this variant is especially suitable for applications where the sensor should be connected directly to compatible evaluation or control technology. Typical Areas of Application room temperature measurement in HVAC applications outdoor temperature measurement on buildings technical indoor and outdoor environments heating, ventilation and air conditioning systems applications with increased protection requirements against dust and splash water Frequently Asked Questions Can I use the thermometer indoors and outdoors? Yes, it is suitable for temperature measurements both indoors and outdoors. What temperature range is the thermometer suitable for? It can reliably measure temperatures from -20°C to +80°C. What are the benefits of the IP54 protection rating? It offers additional protection against dust and splashing water during daily use. Is the thermometer suitable for heating and air conditioning systems? Yes, it is frequently used in heating, ventilation, and air conditioning (HVAC) systems. Can I connect the thermometer directly to my control system? Yes, it is designed for direct connection to compatible monitoring and control systems. Is the thermometer suitable for varying environmental conditions? Yes, it was developed for applications involving diverse environmental conditions. Where is this thermometer typically used? For example, on buildings, in technical rooms, in climate control systems, and in heating, ventilation, and air conditioning (HVAC) systems.

Room, outdoor and duct resistance thermometers  Measuring range from -30 to +80°C  Measuring insert 1x temperature sensor Pt100 in three-wire circuit  Transmitter: without  Protection class IP20   Suitabel for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

JUMO Screw-in Resistance Thermometer with Connection Cable, Loose Screw Connection and Reduced Thermowell JUMO Screw-in Resistance Thermometer with Connection Cable, Loose Screw Connection and Reduced Thermowell, Type: 902050/30-380-1001-1-5,4-27,5-114-11-2500/316 This JUMO screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. The version with loose screw connection and reduced thermowell is particularly suitable for applications where compact dimensions, flexible installation and reliable temperature measurement are required. With 1x Pt100 in a three-wire circuit, silicone connection cable, M10x1 process connection, 27.5 mm installation length and additional kink protection, this version is designed for practical use in technical systems. Technical data Version: Screw-in resistance thermometer with connection cable, loose screw connection and reduced thermowell Measuring insert: 1x Pt100 Circuit type: Three-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Silicone Temperature range: -50 to +200 °C Thermowell diameter: Reduced from 5.4 mm to 3.3 mm Installation length: 27.5 mm Process connection: M10x1 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type addition: Kink protection hose Typical areas of application Wherever a compact design, flexible screw connection and reliable temperature measurement are required, this version is a suitable choice. Air conditioning and refrigeration technology Heating engineering, furnace construction and apparatus engineering Advantages and special features of the JUMO screw-in resistance thermometer Thanks to the thermowell reduced to 3.3 mm, this version is particularly interesting for installation situations with limited space or for measuring points where a slimmer tip is advantageous. At the same time, the loose screw connection allows the thermometer to be adapted more flexibly to the respective installation situation during mounting. This makes the version well suited for applications where a compact design must be combined with a secure process connection. Why should you choose this version from JUMO? This version is a good choice when proven and precise temperature measurement with Pt100 is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many technical applications. In combination with the three-wire circuit, line influences can be compensated more effectively, which supports the most precise possible temperature measurement during operation. The connection cable is also designed for practical use. The silicone cable is suitable for temperatures from -50 to +200 °C and therefore offers good conditions for applications with low or elevated ambient temperatures. With a cable length of 2500 mm, there is also sufficient flexibility for connection to downstream evaluation or control technology. Ferrules according to DIN 46228 Part 4 simplify the electrical connection, while the additional kink protection relieves strain on the cable transition and makes the version more robust in everyday use. The compact installation length of 27.5 mm and the M10x1 process connection make this resistance thermometer particularly interesting for smaller and tighter measuring points. Especially where temperatures in liquid or gaseous media must be monitored reliably and space is limited at the same time, this version offers a practical solution. Type: 902050/30-380-1001-1-5,4-27,5-114-11-2500/316 Frequently Asked Questions Does the thermometer fit into tight installation spaces? Yes, its compact design and short insertion length make it well-suited for measurement points with limited space. For which media can I use the thermometer? The thermometer is designed for temperature measurement in liquid and gaseous media. Can the thermometer be mounted flexibly? Yes, the loose threaded fitting makes it easy to adapt to various installation situations. For which temperatures is the thermometer suitable? It can be used within a temperature range of -50 to +200 °C. Is the connection cable long enough for greater distances? Yes, the silicone connection cable is 2.5 meters long, offering sufficient flexibility during installation. Is the thermometer easy to connect? Yes, the connection cable is fitted with wire end ferrules, which simplifies the electrical connection. Where is this thermometer commonly used? Typical applications include HVAC and refrigeration technology, as well as heating, furnace, and equipment manufacturing. Is this thermometer compatible with my system? Yes, it is suitable for many industrial applications and can be flexibly integrated into various systems. How is the thermometer mounted? It is simply screwed in. The loose threaded fitting facilitates adjustment during installation. Can the thermometer be used in challenging environments? Yes, the protective thermowell reliably shields the sensor from external influences.

JUMO Screw-in Resistance Thermometer with Connection Cable and Loose Screw Connection JUMO Screw-in Resistance Thermometer with Connection Cable and Loose Screw Connection, Type: 902050/20-402-1003-1-6-37-114-11-2500/315,317 This screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. With metal braided connection cable, loose screw connection, 1x Pt100 in a two-wire circuit, 6 mm thermowell diameter, 37 mm installation length and M10x1 process connection, shielded version and high temperature measuring ranges up to +400 °C, this version is particularly suitable for compact measuring points and applications with increased temperature requirements. Technical data Version: Screw-in resistance thermometer with connection cable and loose screw connection Measuring insert: 1x Pt100 Circuit type: Two-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +400 °C Thermowell diameter: 6 mm Installation length: 37 mm Process connection: M10x1 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Typical areas of application Temperature measurement in cartridge heaters, heating blocks or heated components Temperature monitoring in pipelines, tanks and apparatus Applications in dry and humid environments Use in higher ambient temperatures General industrial and process applications Advantages and special features of this JUMO screw-in resistance thermometer A clear advantage of this version lies in the combination of robust construction and high temperature resistance. The metal braided connection cable is designed for temperatures from -50 to +400 °C and is therefore interesting for applications where standard cables are not sufficient. In addition, the shielded connection cable supports interference-free signal transmission, which can be particularly advantageous in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer for higher temperature measuring ranges is required. The Pt100 used according to DIN EN 60751, Class B, is one of the proven standards in temperature measurement technology and is suitable for many typical measuring tasks. The two-wire circuit makes this version a practical solution for applications where reliable temperature measurement is the main focus. The mechanical design is also tailored for practical use. The loose screw connection allows flexible adjustment during installation, while the M10x1 process connection and the installation length of 37 mm make this version particularly interesting for smaller or confined measuring points. This allows the thermometer to be integrated well into technical systems where temperatures must be monitored permanently. Frequently Asked Questions Does the thermometer fit into tight installation spaces? Yes, its compact design makes it well-suited for small and confined measuring points. What temperature range is the thermometer suitable for? It can be used within a temperature range of -50 to +400°C. In what types of systems can I use the thermometer? It is suitable for pipelines, vessels, and technical systems across many sectors. Can the thermometer be mounted flexibly? Yes, the loose screw connection makes adjustment during installation easier. Is the thermometer suitable for industrial environments? Yes, its robust design is engineered for demanding technical applications. How is the thermometer connected? The connecting cable is fitted with wire ferrules, making it easy to connect. Why is this model particularly reliable? The shielded cable and the Pt100 sensor ensure stable and accurate readings. Is the thermometer suitable for liquids and gases? Yes, this JUMO screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. How long is the connecting cable? The connecting cable is 2.5 meters long. What material is the connecting cable made of? The connecting cable features a metal braid.

JUMO Screw-in Resistance Thermometer with Pt100 in Three-wire Circuit, M10x1 Process Connection and Shielded Version for Compact Measuring Points and High Temperatures up to +400 °C. JUMO Screw-in Resistance Thermometer with Connection Cable and Loose Screw Connection, Type: 902050/20-402-1001-1-6-37-114-11-2500/315,317 This JUMO screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. In this version, it is equipped with 1x Pt100 in a three-wire circuit, a metal braided connection cable, loose screw connection, 6 mm thermowell diameter, 37 mm installation length and M10x1 process connection. This makes the version particularly suitable for compact measuring points and applications with increased temperature requirements. Technical data Version: Screw-in resistance thermometer with connection cable and loose screw connection Measuring insert: 1x Pt100 Circuit type: Three-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +400 °C Thermowell diameter: 6 mm Installation length: 37 mm Process connection: M10x1 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Typical areas of application Air conditioning and refrigeration technology Heating engineering, furnace construction and apparatus engineering Wherever temperature measurements are required in pipelines, tanks, machines and technical systems In compact measuring points in liquid and gaseous media Special features and advantages of this JUMO screw-in resistance thermometer An advantage of this version lies in the combination of compact design and high temperature resistance. The metal braided connection cable is designed for temperatures from -50 to +400 °C and is therefore suitable for applications where standard cables are not sufficient. In addition, the shielded connection cable supports interference-free signal transmission, which can be particularly advantageous in technical and industrial environments. The mechanical design is also tailored for practical use. The loose screw connection allows flexible adjustment during installation, while the M10x1 process connection and the installation length of 37 mm make this version particularly interesting for smaller or confined measuring points. This allows the thermometer to be integrated well into technical systems where temperatures must be monitored permanently. The additional type addition with kink protection spring relieves strain on the cable transition and makes this version even more robust under mechanical stress. Especially in applications where movement, tension or frequent handling play a role, this is a practical advantage. Why should you choose this version from JUMO? This version is a good choice when precise Pt100 temperature measurement with improved compensation of line influences is required. The Pt100 used according to DIN EN 60751, Class B, is one of the proven standards in temperature measurement technology and is suitable for many typical measuring tasks. The three-wire circuit offers advantages when measured values need to be recorded more accurately than with a simple two-wire circuit. Type: 902050/20-402-1001-1-6-37-114-11-2500/315,317 Frequently Asked Questions Does the thermometer fit into tight installation spaces? Yes, its compact design makes it well-suited for small and confined measuring points. What temperature range is the thermometer suitable for? It can be used within a temperature range of -50 to +400°C. In what types of systems can I use the thermometer? It is suitable for pipelines, vessels, and technical systems across many sectors. Can the thermometer be mounted flexibly? Yes, the loose screw connection makes adjustment during installation easier. Is the thermometer suitable for industrial environments? Yes, its robust design is engineered for demanding technical applications. How is the thermometer connected? The connecting cable is fitted with wire ferrules, making it easy to connect. Why is this model particularly reliable? The shielded cable and the Pt100 sensor ensure stable and accurate readings. Is the thermometer suitable for liquids and gases? Yes, this JUMO screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. How long is the connecting cable? The connecting cable is 2.5 meters long. What material is the connecting cable made of? The connecting cable features a metal braid.

JUMO Screw-in Resistance Thermometer with Threaded Thermowell for Precise Temperature Measurement in Liquid and Gaseous Media JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell, Type: 902050/40-390-1003-1-8-25-111-11-2500/315,317 This screw-in resistance thermometer with connection cable and threaded thermowell is designed for precise temperature measurement in liquid and gaseous media. With its 1x Pt100 in a two-wire circuit, metal braided connection cable, 25 mm installation length, M8 process connection and shielded connection cable, this version is particularly suitable for compact installation situations and applications with increased requirements for temperature resistance and signal transmission. Advantages and special features of this JUMO screw-in resistance thermometer A major advantage of this version is its robust design for more demanding operating conditions. The metal braided connection cable is designed for temperatures from -50 to +300 °C and therefore offers excellent conditions for applications where standard cables reach their limits. At the same time, the shielded cable supports interference-free signal transmission, which can be a practical advantage especially in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer with high temperature resistance and proven Pt100 measurement technology is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many common applications. The two-wire circuit makes this version a classic and practical solution for numerous measuring tasks. The mechanical design is also tailored for practical use. The M8 process connection and the 25 mm installation length make this thermometer particularly interesting for smaller measuring points or confined installation situations. The combination of threaded thermowell and compact design ensures that the version can be integrated well into technical systems where temperatures must be monitored reliably and permanently. In addition, the type addition with kink protection spring helps relieve strain on the cable transition. This special feature makes the version even more robust when the connection cable is subject to mechanical stress or when movement and tensile loads occur during operation. Typical areas of application Air conditioning and refrigeration technology Heating engineering, furnace construction and apparatus engineering Wherever temperatures in liquid or gaseous media must be measured precisely and at the same time a compact, temperature-resistant design is required, this version is a suitable choice. Technical data Version: Screw-in resistance thermometer with connection cable and threaded thermowell Measuring insert: 1x Pt100 Circuit type: Two-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +300 °C Thermowell diameter: M8 Installation length: 25 mm Process connection: M8 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Frequently Asked Questions Does the thermometer fit into small installation spaces? Yes, its compact design and short insertion length make it well-suited for confined installation areas. For which applications can I use the thermometer? It is suitable for measuring the temperature of liquid and gaseous media in technical systems. Is the thermometer suitable for high temperatures? Yes, it can be used within a temperature range of -50 to +300 °C. Can I use the thermometer in humid environments? Yes, it is designed for both dry and humid environments. Is the connection cable long enough for greater distances? Yes, the connection cable is 2.5 meters long, providing sufficient flexibility during installation. Is the thermometer easy to connect? Yes, the connection cable is fitted with wire end ferrules, making connection easier. Why is the thermometer suitable for industrial systems? The robust connection cable and shielded design ensure reliable operation in everyday use.

JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell, Type: 902050/40-390-1001-1-8-25-111-11-2500/315,317 The JUMO screw-in resistance thermometer with Pt100 in a three-wire circuit, metal braided connection cable, M8 process connection and shielded version is particularly suitable for compact measuring points and higher temperature ranges up to +300 °C. This screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. With 1x Pt100 in a three-wire circuit, metal braided connection cable, installation length of 25 mm, M8 process connection and shielded connection cable, this version is particularly suitable for compact measuring points and applications with increased requirements for temperature resistance and signal transmission. Typical areas of application Measuring points in liquid and gaseous media Dry and humid environments Compact or confined installation situations Applications with vacuum or overpressure Technical systems with increased requirements for the connection cable Technical data Version: Screw-in resistance thermometer with connection cable and threaded thermowell Measuring insert: 1x Pt100 Circuit type: Three-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +300 °C Thermowell diameter: M8 Installation length: 25 mm Process connection: M8 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Advantages and special features of the JUMO screw-in resistance thermometer This version shows its strengths especially under more demanding operating conditions. The metal braided connection cable is designed for temperatures from -50 to +300 °C and therefore offers excellent conditions for applications where standard cables are not sufficient. At the same time, the shielded connection cable supports interference-free signal transmission, which can be a practical advantage especially in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer with proven Pt100 measuring technology and improved compensation of line influences is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many common applications. The three-wire circuit offers advantages compared to a simple two-wire circuit when measured values need to be recorded as precisely as possible. The mechanical design is also tailored for practical use. The M8 process connection and the installation length of 25 mm make this thermometer particularly interesting for smaller measuring points or confined installation situations. The compact design ensures that the version can be integrated well into technical systems where temperatures must be monitored reliably and permanently. Frequently Asked Questions Does the thermometer fit into small installation spaces? Yes, its compact design and short insertion length make it well-suited for confined installation areas. For which applications can I use the thermometer? It is suitable for measuring the temperature of liquid and gaseous media in technical systems. Is the thermometer suitable for high temperatures? Yes, it can be used within a temperature range of -50 to +300 °C. Can I use the thermometer in humid environments? Yes, it is designed for both dry and humid environments. Is the connection cable long enough for greater distances? Yes, the connection cable is 2.5 meters long, providing sufficient flexibility during installation. Is the thermometer easy to connect? Yes, the connection cable is fitted with wire end ferrules, making connection easier. Why is the thermometer suitable for industrial systems? The robust connection cable and shielded design ensure reliable operation in everyday use.

Screw-in resistance thermometer with connection head form J with stepped protection tube for air measurement Measuring range from -50 to +200 °C Single resistance thermometer 1x Pt 100 in two-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 75 mm Process connection: G1/2 threaded connection Extra codes: none The screw-in RTD temperature probe with connection head is specially designed for use in various industries such as air conditioning and refrigeration technology and heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media, with a temperature range of -50 to +400 °C. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure. The measuring insert is fitted as standard with a Pt100 temperature sensor in accordance with the DIN EN 60751:2009 / IEC 60751:2008 standards. This sensor has a temperature coefficient α of 3.850 × 10-3 °C-1 and is installed in a two-wire circuit. Versions with Pt500 or Pt1000 are also available as an option. For more precise measurement results, the connection can be made either in a three-wire or four-wire circuit, and it is also possible to integrate a transmitter into the connection head.

JUMO Dtrans T100 screw-in RTD temperature probe without transmitter, M12 x 1 machine plug connection Measuring range from -50 to + 200 °C 1x Pt100 in four-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 100 mm Process connection: G1/2 screw connection Thermowell material: Stainless steel 316 L (material no. 1.4404/1.4435) EU and China RoHS compliant Extra code: without M12 x 1 push-on connector; protection class IP67 to DIN EN 60529 with attached machine plug USB interface for configuration with setup programme The screw-in resistance thermometer in a compact design consists of a thermowell with built-in temperature sensor, a process connection and a housing for the transmitter electronics. The programmable two-wire transmitter offers a robust solution for the precise recording of temperatures in a temperature measuring range of -50 to + 150°C, with a neck tube up to 260°C and is therefore versatile in use. The device has a USB interface that enables simple configuration via a setup programme. With the help of this programme, parameters such as measuring range, fine adjustment and measuring circuit monitoring can be adjusted to meet the requirements of different applications. The output signal 4 to 20 mA or reversed 20 to 4 mA is available linearised (temperature linear). The device is intended for industrial use and complies with European standards to ensure electromagnetic compatibility (EMC).

UMO Dtrans T100 screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection Measuring range from -50 to + 150 °C 1x Pt1000 in four-wire circuit Tolerance class: Class A Thermowell diameter: 6 mm Installation length: 50 mm Process connection: without Thermowell material: Stainless steel 316 L (material no. 1.4404/1.4435) EU and China RoHS compliant Extra code: without M12 x 1 push-on connector; protection class IP67 to DIN EN 60529 with attached machine plug USB interface for configuration with setup programme The screw-in resistance thermometer in a compact design consists of a thermowell with built-in temperature sensor, a process connection and a housing for the transmitter electronics. The programmable two-wire transmitter offers a robust solution for the precise recording of temperatures in a temperature measuring range of -50 to + 150°C, with a neck tube up to 260°C and is therefore versatile in use. The device has a USB interface that enables simple configuration via a setup programme. With the help of this programme, parameters such as measuring range, fine adjustment and measuring circuit monitoring can be adjusted to meet the requirements of different applications. The output signal 4 to 20 mA or reversed 20 to 4 mA is available linearised (temperature linear). The device is intended for industrial use and complies with European standards to ensure electromagnetic compatibility (EMC).

Screw-in resistance thermometer with form J connection head  With continuous protection tube Measuring range from -50 to +200 °C Single resistance thermometer 2x Pt 100 in two-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 50 mm Process connection: screw connection G ½ Extra codes: none The screw-in RTD temperature probe with connection head is specially designed for use in various industries such as air conditioning and refrigeration technology and heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media, with a temperature range of -50 to +400 °C. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure.The measuring insert is fitted as standard with a Pt100 temperature sensor in accordance with the DIN EN 60751:2009 / IEC 60751:2008 standards. This sensor has a temperature coefficient α of 3.850 × 10-3 °C-1 and is installed in a two-wire circuit. Versions with Pt500 or Pt1000 are also available as an option. For more precise measurement results, the connection can be made either in a three-wire or four-wire circuit, and it is also possible to integrate a transmitter into the connection head. Depending on the measurement requirements, a single or dual resistance thermometer can also be selected.

JUMO Wall-Mounted Resistance Thermometer with Pt100 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1003-1/000 The wall-mounted resistance thermometer is suitable for temperature measurements in HVAC applications with increased protection requirements. Equipped with a Pt100 sensor in a two-wire circuit, a measuring range of -30 to +90 °C, and protection class IP65, this version is designed for compact wall-mounted measuring points in indoor and protected outdoor areas. This version is intended for wall-mounted temperature measurements and is especially useful where the sensor is protected inside the housing while requiring a robust outer enclosure. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of the JUMO Wall-Mounted Resistance Thermometer compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt100 sensor for proven temperature measurement suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version particularly interesting for measuring points where the temperature is to be recorded directly in the area surrounding the housing without requiring a protruding sensing element. This can be advantageous wherever a compact, closed design is preferred and the sensor should remain better protected against mechanical influences. With protection class IP65, this version provides significantly greater protection against dust and water than standard room sensors. This makes it suitable for environments where the housing is exposed to higher levels of stress or where a higher protection rating is required. Especially in HVAC technology, this can be beneficial for installations in more technically demanding environments. Temperature measurement is performed using a Pt100 sensor in a two-wire circuit. This proven sensor configuration is suitable for many standard measurement tasks in temperature measurement technology. Since no transmitter is integrated, this version is particularly well suited for applications where the sensor is connected directly to a suitable control or evaluation unit. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Applications with increased protection requirements against dust and water Heating, ventilation, and air conditioning systems Frequently Asked Questions What can I use this thermometer for? It is ideal for rooms, equipment, or processes where temperature monitoring is required. Can I use the thermometer in damp areas? Yes; thanks to its IP65 rating, the housing is well-protected against dust and water, making it suitable for more demanding environments. Is the device suitable for outdoor use? Yes, it can be used in sheltered outdoor areas, such as under canopies or in weather-protected technical areas. What temperature range is the thermometer suitable for? The device reliably measures temperatures from -30 to +90°C, covering a wide range of applications. Where exactly is the temperature measured? The sensor is housed securely within the casing and measures the temperature in the immediate vicinity of the mounting point. Is the thermometer suitable for my heating or ventilation system? Yes, it is frequently used for temperature monitoring in heating, ventilation, and air conditioning (HVAC) systems. Do I need an additional transmitter? No, the thermometer outputs a Pt1000 signal directly and can be connected to compatible evaluation or control systems. Why doesn't the device have a protruding probe? The enclosed design protects the sensor and allows for compact, unobtrusive wall mounting. Can I use it outdoors or in damp areas? Yes; thanks to its IP65 rating, it is dust-tight and protected against water jets. How robust is the thermometer for everyday use? It is durable, shock-resistant, and suitable for continuous operation.

Wall-Mounted Resistance Thermometer by JUMO with Pt1000 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1005-1/000 This wall-mounted resistance thermometer from JUMO is suitable for HVAC temperature measurements with a compact housing design. Equipped with Pt1000 in a two-wire circuit and a measuring range of -30 to +90 °C, this version is designed for wall-mounted measuring points in indoor and protected outdoor areas. This version is suitable for wall-mounted measuring points where the sensor should be protected inside the housing while a Pt1000 signal is required. With an operating range of -30 to +90 °C and protection class IP65, this wall-mounted resistance thermometer is particularly suitable for HVAC applications in indoor and protected outdoor areas. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt1000 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of this JUMO Thermometer Version compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt1000 sensor for compatible control and evaluation systems suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version especially interesting wherever the temperature should be measured directly around the housing without requiring a separate protruding sensing element. This creates a compact design and is particularly practical where a discreet, closed solution is preferred. Unlike Pt100 versions, this model operates with 1 x Pt1000 in a two-wire circuit. This is particularly useful when the connected control or evaluation system is designed for Pt1000 or when this sensor configuration is preferred. Since no transmitter is integrated, the device is especially suitable for applications where the sensor should be connected directly to a compatible evaluation unit. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments where standard room sensors are not sufficient and a more robust housing is required. Especially in HVAC technology, this can be an advantage for wall-mounted installations in technically demanding areas. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Heating, ventilation, and air conditioning systems Frequently Asked Questions What can I use this thermometer for? It is ideal for rooms, equipment, or processes where temperature monitoring is required. Can I use the thermometer in damp areas? Yes; thanks to its IP65 rating, the housing is well-protected against dust and water, making it suitable for more demanding environments. Is the device suitable for outdoor use? Yes, it can be used in sheltered outdoor areas, such as under canopies or in weather-protected technical areas. What temperature range is the thermometer suitable for? The device reliably measures temperatures from -30 to +90°C, covering a wide range of applications. Where exactly is the temperature measured? The sensor is housed securely within the casing and measures the temperature in the immediate vicinity of the mounting point. Is the thermometer suitable for my heating or ventilation system? Yes, it is frequently used for temperature monitoring in heating, ventilation, and air conditioning (HVAC) systems. Do I need an additional transmitter? No, the thermometer outputs a Pt1000 signal directly and can be connected to compatible evaluation or control systems. Why doesn't the device have a protruding probe? The enclosed design protects the sensor and allows for compact, unobtrusive wall mounting. Can I use it outdoors or in damp areas? Yes; thanks to its IP65 rating, it is dust-tight and protected against water jets. How robust is the thermometer for everyday use? It is durable, shock-resistant, and suitable for continuous operation.

Room, outdoor and duct resistance thermometers Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

Wall-Mounted Resistance Thermometer with Pt100 without Transmitter and Measuring Range -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube and Protection Class IP65, Type: 902520/23-573-1003-1/000 The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with a spatially separated measuring point. Equipped with Pt100 in a two-wire circuit and a measuring range of -30 to +90 °C, this version is particularly suitable for measurements where the temperature should not be recorded directly inside the housing but closer to the actual measuring point via a remote protection tube. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of this Wall-Mounted Resistance Thermometer remote protection tube for more targeted temperature measurement IP65 protection class for increased housing protection requirements well suited for wall-mounted measuring points with a spatially separated measuring location robust design for indoor and protected outdoor areas The remote protection tube is the key distinguishing feature of this version. It allows the temperature to be measured more precisely at the desired location while the housing remains mounted separately on the wall. This is especially practical when the measuring point is not located directly at the housing installation position or when some structural distance is required. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments requiring more robust protection than standard room sensors. Especially in HVAC applications, this is an advantage for wall-mounted installations in technically demanding environments. Temperature measurement is performed using a Pt100 sensor in a two-wire circuit. This proven sensor configuration is suitable for many standard measuring tasks in temperature measurement technology. Since no transmitter is integrated, this version is especially suitable for applications where the sensor should be connected directly to a compatible control or evaluation unit. Typical Applications Wall-mounted measuring points in HVAC applications Temperature monitoring with a slightly remote measuring point Heating, ventilation, and air conditioning systems Technical indoor areas Protected outdoor areas Frequently Asked Questions What can I use this thermometer for? It is suitable for temperature monitoring in heating, ventilation, air conditioning, and building automation systems. Why does the thermometer have an extended protective sleeve? To allow the temperature to be measured closer to the actual point of interest rather than right at the housing. What temperature range is the thermometer suitable for? Depending on the specific model, the device is designed for temperature ranges of -30 to +60°C, -30 to +90°C, and -40 to +80°C. Is the thermometer suitable for humid environments? Yes, the housing is protected against dust and water jets in accordance with the IP65 rating. Where is this thermometer typically used? It is frequently used in HVAC systems, building automation, and heating and ventilation installations. Is the protective sleeve robust enough for long-term operation? Yes, the protective sleeve is made of stainless steel and reliably protects the sensor.

Wall-Mounted Resistance Thermometer with Pt1000 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 Type: 902520/23-573-1005-1/000 The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with a spatially separated measuring point. Equipped with Pt1000 in a two-wire circuit, a measuring range of -30 to +90 °C, a remote protection tube, and protection class IP65, this version is designed for wall-mounted measuring points where the actual measuring location is not directly inside the housing but is detected via a remote protection tube. It is particularly suitable for HVAC applications in indoor and protected outdoor areas. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt1000 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of the JUMO Wall-Mounted Resistance Thermometer remote protection tube for more targeted temperature measurement Pt1000 sensor for compatible control and evaluation systems IP65 protection class for increased housing protection requirements well suited for wall-mounted measuring points with a spatially separated measuring location The remote protection tube makes this version especially useful where the temperature should not be measured directly at the wall surface but with some distance from it. This allows the sensor to be positioned more precisely at the relevant measuring point while the housing remains mounted separately. This is particularly practical when the measuring point is structurally not located directly at the installation position of the housing. Unlike Pt100 versions, this model operates with 1 x Pt1000 in a two-wire circuit. This is especially beneficial when the connected control or evaluation system is designed for Pt1000 or when this sensor configuration is preferred. Since no transmitter is integrated, the device is particularly suitable for applications where the sensor should be connected directly to a compatible evaluation unit. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments where a more robust wall-mounted solution is required than standard room sensors. Especially in technically demanding HVAC environments, this is a clear advantage. Typical Applications Wall-mounted measuring points in HVAC applications Temperature monitoring with a slightly remote measuring point Heating, ventilation, and air conditioning systems Technical indoor areas Protected outdoor areas Frequently Asked Questions What can I use this thermometer for? It is suitable for temperature monitoring in heating, ventilation, air conditioning, and building automation systems. Why does the thermometer have an extended protective sleeve? To allow the temperature to be measured closer to the actual point of interest rather than right at the housing. What temperature range is the thermometer suitable for? Depending on the specific model, the device is designed for temperature ranges of -30 to +60°C, -30 to +90°C, and -40 to +80°C. Is the thermometer suitable for humid environments? Yes, the housing is protected against dust and water jets in accordance with the IP65 rating. Where is this thermometer typically used? It is frequently used in HVAC systems, building automation, and heating and ventilation installations. Is the protective sleeve robust enough for long-term operation? Yes, the protective sleeve is made of stainless steel and reliably protects the sensor.

Wall-Mounted Resistance Thermometer by JUMO with Pt100 and Analog Transmitter with Measuring Range -30 to +60 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 Type: 902520/23-474-1003-1/330,(-30..60°C) The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with direct analog signal transmission. Equipped with Pt100 in a two-wire circuit, an integrated 4 to 20 mA transmitter, and a measuring range of -30 to +60 °C, this version is particularly suitable for wall-mounted measuring points where the temperature value should not only be measured but also transmitted directly as a standard analog signal. The wall-mounted resistance thermometer is equipped with a remote protection tube. This makes the version especially interesting for HVAC applications where the measuring point is located at some distance from the housing and the signal should be transferred directly to a control or regulation system. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: 1 x analog, output 4 to 20 mA Measuring range: -30 to +60 °C Note: Measuring range only in combination with transmitter Protection class: IP65 Advantages and Technical Features remote protection tube for more targeted temperature measurement integrated 4 to 20 mA transmitter for direct signal transmission well suited for wall-mounted measuring points with a spatially separated measuring location suitable solution for building automation and HVAC applications no additional external signal conversion required The remote protection tube is an important advantage of this version. It enables the temperature to be measured closer to the actual measuring point while the housing remains mounted separately on the wall. This is especially practical when the temperature should not be measured directly at the housing location but with some distance from it. In addition, the integrated transmitter with a 4 to 20 mA output allows the temperature signal to be processed directly as a standardized current signal. Especially in building automation, HVAC systems, and other technical applications, this is beneficial when no additional external transmitter is planned on the system side. The relevant measuring range for this version is -30 to +60 °C and applies in combination with the transmitter. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for technically demanding environments where a more robust wall-mounted solution is required than standard room sensors can provide. Typical Applications Wall-mounted measuring points in HVAC applications Building automation Heating, ventilation, and air conditioning systems Applications with direct signal transmission to controllers or control systems Measuring points with a slightly remote measuring location Frequently Asked Questions What can I use this thermometer for? It is suitable for temperature monitoring in heating, ventilation, air conditioning, and building automation systems. Why does the thermometer have an extended protective sleeve? To allow the temperature to be measured closer to the actual point of interest rather than right at the housing. What temperature range is the thermometer suitable for? Depending on the specific model, the device is designed for temperature ranges of -30 to +60°C, -30 to +90°C, and -40 to +80°C. Is the thermometer suitable for humid environments? Yes, the housing is protected against dust and water jets in accordance with the IP65 rating. Where is this thermometer typically used? It is frequently used in HVAC systems, building automation, and heating and ventilation installations. Is the protective sleeve robust enough for long-term operation? Yes, the protective sleeve is made of stainless steel and reliably protects the sensor.

Wall-Mounted Resistance Thermometer by JUMO with Pt100 and Analog Transmitter with 0 to 10 V Output for Measuring Range -30 to +60 °C JUMO Wall-Mounted Resistance Thermometer with Remote Protection Tube Protection Class IP65 Type: 902520/23-474-1003-1/333,(-30..60°C) The wall-mounted resistance thermometer is suitable for HVAC temperature measurements with direct voltage output. Equipped with Pt100 in a two-wire circuit, an integrated 0 to 10 V transmitter, and a measuring range of -30 to +60 °C, this version is particularly suitable for robust wall-mounted measuring points with a separated measuring location. This version is intended for wall-mounted measuring points where the temperature should be measured at a location slightly separated from the housing and transmitted directly as a voltage signal. Technical Data Version: Wall-mounted resistance thermometer with remote protection tube Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: 1 x analog, output 0 to 10 V Measuring range: -30 to +60 °C Note: Measuring range only in combination with transmitter Protection class: IP65 Advantages and Technical Features remote protection tube for more targeted temperature measurement well suited for wall-mounted measuring points with a spatially separated measuring location suitable solution for building automation and HVAC applications no additional external signal conversion required The remote protection tube is a clear advantage because the actual measuring point does not need to be located directly at the housing position. This allows the temperature to be measured more precisely where it is truly relevant for the application. This is especially practical for wall mounting when a small distance between the housing and the measuring location is beneficial or structurally required. In addition, the integrated transmitter with a 0 to 10 V output provides the temperature signal directly as a voltage signal and allows further processing without additional external signal conversion. Especially in building automation and HVAC applications, this is beneficial when the system operates with 0 to 10 V inputs. The measuring range relevant for this version is -30 to +60 °C and applies in combination with the transmitter. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for technically demanding environments where a more robust wall-mounted solution is required than standard room sensors. Typical Applications Wall-mounted measuring points in HVAC applications Building automation Heating, ventilation, and air conditioning systems Applications with direct signal transmission to controllers or control systems Measuring points with a slightly remote measuring location Technical indoor areas and protected outdoor areas Applications with increased protection requirements against dust and water Frequently Asked Questions What can I use this thermometer for? It is suitable for temperature monitoring in heating, ventilation, air conditioning, and building automation systems. Why does the thermometer have an extended protective sleeve? To allow the temperature to be measured closer to the actual point of interest rather than right at the housing. What temperature range is the thermometer suitable for? Depending on the specific model, the device is designed for temperature ranges of -30 to +60°C, -30 to +90°C, and -40 to +80°C. Is the thermometer suitable for humid environments? Yes, the housing is protected against dust and water jets in accordance with the IP65 rating. Where is this thermometer typically used? It is frequently used in HVAC systems, building automation, and heating and ventilation installations. Is the protective sleeve robust enough for long-term operation? Yes, the protective sleeve is made of stainless steel and reliably protects the sensor.