Screw-in resistance thermometer with connecting cable with fixed screw connectionType: 902050/10-380-1001-1-6-250-104-11-2500/316Silicone connecting cables Temperature range from -50 to +200 °C With fixed screw connection Single resistance thermometer 1x Pt 100 in three-wire circuit Tolerance class according to DIN EN 60 751: Class B (standard) Thermowell diameter: 6 mm Installation length 250 mm Process connection: G1/2 screw connection Connection cable end: Wire end ferrules to DIN 46 228 Part 4 (standard) Connection cable length: 2500 mm The screw-in resistance thermometer with connection cable is specially designed for use in various industries such as air conditioning and refrigeration technology, heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure. The possible applications range from dry to humid environments and, depending on the version, enable precise temperature measurement in the range from -50 to +400 °C. The connection cable of this screw-in resistance thermometer is available in various materials, including PVC, silicone, PTFE and metal braiding. This variety makes it possible to select the right variant for your application. The transition of the connecting cable is strain-relieved and an optional bend protection can be fitted to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class B in a two-wire circuit. Optionally, the measuring insert can also be selected with Pt 500 or Pt 1000. In addition, the connection can be made in either three- or four-wire circuits to meet individual requirements.

Contact resistance thermometer with mounting hole Protective fitting aluminium Typ: 902550/10-386-1003-1-11-2500/000  Temperature range from -50 to +260°C (PTFE)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with tensioning straps or hose clamps eliminates the need for mechanical processing of the measuring point. Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is available as an option to optimise heat transfer. Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here. A Pt100 temperature sensor in accordance with DIN EN 60751 Class B is installed as standard in a two-wire circuit, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Stainless steel protective fitting Typ: 902550/11-386-1003-1-11-2500/000  Temperature range from -50 to +260°C (PTFE)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with tensioning straps or hose clamps eliminates the need for mechanical processing of the measuring point. Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is available as an option to optimise heat transfer. Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here. A Pt100 temperature sensor in accordance with DIN EN 60751 Class B is installed as standard in a two-wire circuit, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Stainless steel protective fitting Typ: 902550/30-378-1003-1-11-2500/315,  Temperature range from -50 to +260°C (PTFE)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: Spring bend protection  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 6 

Contact resistance thermometer with mounting hole Protective fitting aluminium Typ: 902550/31-730-1003-1-11-2500/000  Temperature range from -5 to +105°C (PVC)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is fitted as standard, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Protective fitting aluminium (D 10x26 mm) Typ: 902550/31-378-1003-1-11-2500/000  Temperature range from -50 to +180°C (Silicon)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is fitted as standard, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Protective fitting aluminium Typ: 902550/31-378-1005-1-11-2500/000  Temperature range from -50 to +180°C (PVC)  1× Pt1000 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is fitted as standard, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Protective fitting stainless stell Typ: 902550/20-386-1003-1-11-2500/000  Temperature range from -50 to +260°C (PTFE)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated installation with tensioning straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is fitted as standard, but variants with Pt500, Pt1000 are also possible. 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-009/000 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: 4 ... 20 mA / 0 ... 10 V combi output config. Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-009/994 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: 4 ... 20 mA / 0 ... 10 V combi output config. Extra code: with integrated display Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-530/000 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: RS-485 Modbus Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-535/994 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: SPE with PoDL (modbus TCP slave) Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-530/994 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: RS-485 Modbus Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-009/000 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: 4 bis 20 mA / 0 bis 10 V combi output configurable Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-009/994 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: 4 ... 20 mA / 0 ... 10 V combi output config. Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-530/000 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: RS-485 Modbus Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-530/994 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: RS-485 Modbus Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct version Typ: 907043/11 Basic type extension: RH-T Version: StandardMeasuring range: 0 to 100 % RH/-40 to +80 °COutput: 4 to 20 mA/0 to 10 V combined output configuredExtra code: Without Measuring parametersTemperatureRelative humidityCarbon dioxide (CO2) optional InterfacesUSB PORTRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct versionTyp: 907043/11 Basic type extension: RH-T Version: StandardMeasuring range: 0 to 100 % RH/-40 to +80 °COutput: RS485 ModbusExtra code: Without Measuring parametersTemperatureRelative humidityInterfacesRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct version Typ: 907043/12 Basic type extension: RH-T Version: StandardMeasuring range: 0 to 95 % RH/-10 to +60 °COutput: 4 to 20 mA/0 to 10 V combined output configuredExtra code: Without Measuring parametersTemperatureRelative humidityCarbon dioxide (CO2) optional InterfacesUSB PORTRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct versionTyp: 907043/12 Basic type extension: RH-T-CO2Version: StandardMeasuring range: 0 to 95 % RH/-10 to +60 °COutput: RS-485 ModbusExtra code: Without Measuring parametersTemperatureRelative humidityCarbon dioxide (CO2) optional InterfacesUSB PORTRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

Push-in resistance thermometer in water vapour-tight designType: 902830/10-370-1011-2-6-100-11-2500/317 Measuring range -50 to +150°C Connection cable: PTFE 1x Pt 100 in four-wire circuit  Single resistance thermometer Tolerance class A according to DIN EN 60 751 Thermowell diameter: 6 mm Insertion length: 100 mm Connection cable end: Wire end ferrules to DIN 46 228 Connection cable length: 2500 mm (standard) Extra codes: Shielded connecting cableThe plug-in resistance thermometer in water vapour-tight design is preferably used for temperature measurements in sterilisers. Their specific design allows them to be used in atmospheres containing water vapour and under pressure. Another area of application is in apparatus engineering and laboratory technology. The thermometer can be supplied with a PTFE connection cable, which enables operation in humid rooms in the temperature range from -50 to +150 °C, or alternatively an FEP connection cable is available, which covers temperatures from -70 to +200 °C.The transition of the connection cable is strain-relieved to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class A in a two-wire circuit. In addition, the connection can optionally be made in three- and four-wire circuits to meet individual requirements.

Push-in resistance thermometer in water vapour-tight designType: 902830/10-370-2001-2-6-100-11-2500/000  Measuring range -50 to +150°C Connection cable: PTFE 2x Pt 100 in Three-wire circuit  Single resistance thermometer Tolerance class A according to DIN EN 60 751 Thermowell diameter: 6 mm Insertion length: 100 mm Connection cable end: Wire end ferrules to DIN 46 228 Connection cable length: 2500 mm (standard) Extra codes: Shielded connecting cableThe plug-in resistance thermometer in water vapour-tight design is preferably used for temperature measurements in sterilisers. Their specific design allows them to be used in atmospheres containing water vapour and under pressure. Another area of application is in apparatus engineering and laboratory technology. The thermometer can be supplied with a PTFE connection cable, which enables operation in humid rooms in the temperature range from -50 to +150 °C, or alternatively an FEP connection cable is available, which covers temperatures from -70 to +200 °C.The transition of the connection cable is strain-relieved to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class A in a two-wire circuit. In addition, the connection can optionally be made in three- and four-wire circuits to meet individual requirements.

Push-in resistance thermometer in water vapour-tight design, pressure-tight up to 5.0 barType: 902830/30-302-1011-2-4-50-11-2500/000  Measuring range -70 to +200°C Connection cable: FEP 1 x Pt 100 in four-wire circuit  Single resistance thermometer Tolerance class A according to DIN EN 60 751 Thermowell diameter: 4 mm Insertion length: 50 mm Connection cable end: Wire end ferrules to DIN 46 228 Connection cable length: 2500 mm (standard) Extra codes: without extra codeThe insertion resistance thermometer in water vapour-tight design is preferably used for temperature measurements in sterilisers. Their specific design allows them to be used in atmospheres containing water vapour and under pressure. Another area of application is in apparatus engineering and laboratory technology. The thermometer can be supplied with a PTFE connection cable, which enables operation in humid rooms in the temperature range from -50 to +150 °C, or alternatively an FEP connection cable is available, which covers temperatures from -70 to +200 °C.The transition of the connection cable is strain-relieved to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class A in a two-wire circuit. In addition, the connection can optionally be made in three- and four-wire circuits to meet individual requirements.