JUMO insertion resistance thermometer in water vapour-tight design
€151.50*
Please log in to receive your conditions.
Available in 28 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "JUMO insertion resistance thermometer in water vapour-tight design"
JUMO Insertion Resistance Thermometer in Steam-tight Design for Precise Temperature Measurements in Steam-containing and Pressurized Environments
JUMO Insertion Resistance Thermometer with PTFE Connection Cable and 2x Pt100 in Three-wire Circuit, Type: 902830/10-370-2001-2-6-100-11-2500/000
This JUMO insertion resistance thermometer is designed for precise temperature measurements in steam-containing and pressurized atmospheres. With 2x Pt100 in a three-wire circuit, PTFE connection cable, 6 mm thermowell diameter and 100 mm installation length, this version is particularly suitable for sterilizers, apparatus engineering and laboratory technology.
Technical data
- Version: Insertion resistance thermometer in steam-tight design
- Measuring insert: 2x Pt100
- Circuit type: Three-wire circuit
- Tolerance class: Class A according to DIN EN 60751
- Measuring range: -50 to +150 °C
- Connection cable: PTFE
- Thermowell diameter: 6 mm
- Installation length: 100 mm
- Connection cable end: Ferrules according to DIN 46228
- Connection cable length: 2500 mm
- Type addition: without type addition
- Protection class: IP69
Typical areas of application
- Temperature measurements in sterilizers
- In apparatus engineering and laboratory technology
In addition, this version is suitable wherever temperatures must be monitored reliably in steam-containing atmospheres or under pressure.
Special features and advantages
Especially in humid, steam-loaded or pressurized environments, a suitable sensor design is important. The steam-tight construction makes this thermometer particularly interesting for applications where temperatures must be measured reliably even under demanding conditions. Thanks to its special construction, it is designed for use in areas where moisture, steam and pressure play a role.
The connection cable is also designed for demanding environments. The PTFE connection cable is suitable for use in humid rooms and supports a reliable connection to downstream evaluation or control technology. With a cable length of 2500 mm, there is sufficient flexibility for installation. The cable end with ferrules according to DIN 46228 enables a clean electrical connection.
With a 6 mm thermowell diameter and a 100 mm installation length, this version is well suited for many typical measuring points. The stainless steel thermowell supports a robust design, while the IP69 protection class further emphasizes its suitability for demanding environmental conditions.
Why should you choose this JUMO version?
This version is a good choice when precise temperature measurement with a redundant sensor design is required. The 2x Pt100 in a three-wire circuit enable reliable temperature measurement and are particularly interesting when two measurement signals are required or additional safety in temperature monitoring is needed. The tolerance class A according to DIN EN 60751 also indicates high measurement accuracy.
Type: 902830/10-370-2001-2-6-100-11-2500/000
Dimensions
| Height | 2 cm |
|---|---|
| Length | 22 cm |
| Width | 20 cm |
Weight
| Weight | 76 g |
|---|
Other attributes
| Anschlussleitung | PTFE |
|---|---|
| Country of origin | DE |
| Customs tariff number | 90251900 |
| Einbaulänge in mm | 100 mm |
| Messeinsatz | 2x Pt 100 Dreileiterschaltung |
| Schutzrohrdurchmesser | 6 mm |
| Temperaturbereich | -50°C ... +150°C |
Downloads:
|
Connection: |
bare cable ends stripped, with wire end ferrules, available with plug-in sleeves or multi-pole plug connection |
|
Connection cable: |
PTFE, ambient temperature -190...+260°C FEP, ambient temperature -70...+200°C Silicone, ambient temperature -50...+150°C Shielded connection cable available as an option |
|
Protection tube: |
Stainless steel 1.4571, Ø 4mm, Ø 4.5mm, Ø 6mm |
|
Measuring insert: |
Pt 100 temperature sensor, DIN EN 60 751, cl. A, two-, three-, four-wire circuit |
|
Protection class: |
IP69 |