UMO Dtrans T100 screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection Measuring range from -50 to + 150 °C 1x Pt1000 in four-wire circuit Tolerance class: Class A Thermowell diameter: 6 mm Installation length: 50 mm Process connection: without Thermowell material: Stainless steel 316 L (material no. 1.4404/1.4435) EU and China RoHS compliant Extra code: without M12 x 1 push-on connector; protection class IP67 to DIN EN 60529 with attached machine plug USB interface for configuration with setup programme The screw-in resistance thermometer in a compact design consists of a thermowell with built-in temperature sensor, a process connection and a housing for the transmitter electronics. The programmable two-wire transmitter offers a robust solution for the precise recording of temperatures in a temperature measuring range of -50 to + 150°C, with a neck tube up to 260°C and is therefore versatile in use. The device has a USB interface that enables simple configuration via a setup programme. With the help of this programme, parameters such as measuring range, fine adjustment and measuring circuit monitoring can be adjusted to meet the requirements of different applications. The output signal 4 to 20 mA or reversed 20 to 4 mA is available linearised (temperature linear). The device is intended for industrial use and complies with European standards to ensure electromagnetic compatibility (EMC).

Screw-in resistance thermometer with form J connection head  With continuous protection tube Measuring range from -50 to +200 °C Single resistance thermometer 2x Pt 100 in two-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 50 mm Process connection: screw connection G ½ Extra codes: none The screw-in RTD temperature probe with connection head is specially designed for use in various industries such as air conditioning and refrigeration technology and heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media, with a temperature range of -50 to +400 °C. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure.The measuring insert is fitted as standard with a Pt100 temperature sensor in accordance with the DIN EN 60751:2009 / IEC 60751:2008 standards. This sensor has a temperature coefficient α of 3.850 × 10-3 °C-1 and is installed in a two-wire circuit. Versions with Pt500 or Pt1000 are also available as an option. For more precise measurement results, the connection can be made either in a three-wire or four-wire circuit, and it is also possible to integrate a transmitter into the connection head. Depending on the measurement requirements, a single or dual resistance thermometer can also be selected.

JUMO Wall-Mounted Resistance Thermometer with Pt100 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1003-1/000 The wall-mounted resistance thermometer is suitable for temperature measurements in HVAC applications with increased protection requirements. Equipped with a Pt100 sensor in a two-wire circuit, a measuring range of -30 to +90 °C, and protection class IP65, this version is designed for compact wall-mounted measuring points in indoor and protected outdoor areas. This version is intended for wall-mounted temperature measurements and is especially useful where the sensor is protected inside the housing while requiring a robust outer enclosure. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of the JUMO Wall-Mounted Resistance Thermometer compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt100 sensor for proven temperature measurement suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version particularly interesting for measuring points where the temperature is to be recorded directly in the area surrounding the housing without requiring a protruding sensing element. This can be advantageous wherever a compact, closed design is preferred and the sensor should remain better protected against mechanical influences. With protection class IP65, this version provides significantly greater protection against dust and water than standard room sensors. This makes it suitable for environments where the housing is exposed to higher levels of stress or where a higher protection rating is required. Especially in HVAC technology, this can be beneficial for installations in more technically demanding environments. Temperature measurement is performed using a Pt100 sensor in a two-wire circuit. This proven sensor configuration is suitable for many standard measurement tasks in temperature measurement technology. Since no transmitter is integrated, this version is particularly well suited for applications where the sensor is connected directly to a suitable control or evaluation unit. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Applications with increased protection requirements against dust and water Heating, ventilation, and air conditioning systems JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 6 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions What can I use this thermometer for? It is ideal for rooms, equipment, or processes where temperature monitoring is required. Can I use the thermometer in damp areas? Yes; thanks to its IP65 rating, the housing is well-protected against dust and water, making it suitable for more demanding environments. Is the device suitable for outdoor use? Yes, it can be used in sheltered outdoor areas, such as under canopies or in weather-protected technical areas. What temperature range is the thermometer suitable for? The device reliably measures temperatures from -30 to +90°C, covering a wide range of applications. Where exactly is the temperature measured? The sensor is housed securely within the casing and measures the temperature in the immediate vicinity of the mounting point. Is the thermometer suitable for my heating or ventilation system? Yes, it is frequently used for temperature monitoring in heating, ventilation, and air conditioning (HVAC) systems. Do I need an additional transmitter? No, the thermometer outputs a Pt1000 signal directly and can be connected to compatible evaluation or control systems. Why doesn't the device have a protruding probe? The enclosed design protects the sensor and allows for compact, unobtrusive wall mounting. Can I use it outdoors or in damp areas? Yes; thanks to its IP65 rating, it is dust-tight and protected against water jets. How robust is the thermometer for everyday use? It is durable, shock-resistant, and suitable for continuous operation.

Wall-Mounted Resistance Thermometer by JUMO with Pt1000 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1005-1/000 This wall-mounted resistance thermometer from JUMO is suitable for HVAC temperature measurements with a compact housing design. Equipped with Pt1000 in a two-wire circuit and a measuring range of -30 to +90 °C, this version is designed for wall-mounted measuring points in indoor and protected outdoor areas. This version is suitable for wall-mounted measuring points where the sensor should be protected inside the housing while a Pt1000 signal is required. With an operating range of -30 to +90 °C and protection class IP65, this wall-mounted resistance thermometer is particularly suitable for HVAC applications in indoor and protected outdoor areas. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt1000 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of this JUMO Thermometer Version compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt1000 sensor for compatible control and evaluation systems suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version especially interesting wherever the temperature should be measured directly around the housing without requiring a separate protruding sensing element. This creates a compact design and is particularly practical where a discreet, closed solution is preferred. Unlike Pt100 versions, this model operates with 1 x Pt1000 in a two-wire circuit. This is particularly useful when the connected control or evaluation system is designed for Pt1000 or when this sensor configuration is preferred. Since no transmitter is integrated, the device is especially suitable for applications where the sensor should be connected directly to a compatible evaluation unit. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments where standard room sensors are not sufficient and a more robust housing is required. Especially in HVAC technology, this can be an advantage for wall-mounted installations in technically demanding areas. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Heating, ventilation, and air conditioning systems JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 6 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions What can I use this thermometer for? It is ideal for rooms, equipment, or processes where temperature monitoring is required. Can I use the thermometer in damp areas? Yes; thanks to its IP65 rating, the housing is well-protected against dust and water, making it suitable for more demanding environments. Is the device suitable for outdoor use? Yes, it can be used in sheltered outdoor areas, such as under canopies or in weather-protected technical areas. What temperature range is the thermometer suitable for? The device reliably measures temperatures from -30 to +90°C, covering a wide range of applications. Where exactly is the temperature measured? The sensor is housed securely within the casing and measures the temperature in the immediate vicinity of the mounting point. Is the thermometer suitable for my heating or ventilation system? Yes, it is frequently used for temperature monitoring in heating, ventilation, and air conditioning (HVAC) systems. Do I need an additional transmitter? No, the thermometer outputs a Pt1000 signal directly and can be connected to compatible evaluation or control systems. Why doesn't the device have a protruding probe? The enclosed design protects the sensor and allows for compact, unobtrusive wall mounting. Can I use it outdoors or in damp areas? Yes; thanks to its IP65 rating, it is dust-tight and protected against water jets. How robust is the thermometer for everyday use? It is durable, shock-resistant, and suitable for continuous operation.

Room, outdoor and duct resistance thermometers Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

Room, outdoor and duct resistance thermometers Typ: 902520/23-474-1003-1/333,(-40..80°C) Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

Push-in resistance thermometer with straight connection cable, stainless steel protection tube  Temperature measuring range: -50 ... +260 °C / Silicon  Measuring insert: 1x Pt 100 in two-wire circuit  Installation length: 45 mm  Cable length: 2500 mm  Tolerance class: Class B (standard)  Thermowell diameter: 6 mm  Wire end ferrules  Extra code: with bend protection, cable shielded  Available as single and dual resistance thermometers  Available in straight and angled versions to meet different mounting requirements.  Flexible connection cables  Strain relief to protect against mechanical stress  Meets SIL and PL qualification standards for maximum safety  Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.