JUMO screw-in resistance thermometer with connection cable and fixed screw connection

Technical data

• Version: Screw-in resistance thermometer with connection cable and fixed screw connection
• Measuring insert: 1x Pt100
• Circuit type: Three-wire circuit
• Tolerance class: Class B according to DIN EN 60751
• Connection cable: Silicone
• Temperature range: -50 to +200 °C
• Thermowell diameter: 6 mm
• Installation length: 100 mm
• Process connection: G1/2
• Connection cable end: Ferrules according to DIN 46228 Part 4
• Connection cable length: 2500 mm

Typical areas of application

• Air conditioning and refrigeration technology
• Heating engineering, furnace construction and apparatus engineering
• Anywhere temperatures in liquid or gaseous media must be measured precisely

Advantages and special features of the JUMO screw-in resistance thermometer

A major advantage of this version is its robust and sealed installation design. The fixed screw connection ensures secure integration into the measuring point and is particularly interesting for applications where reliable sealing is important even under vacuum or overpressure conditions. This makes the resistance thermometer especially attractive for technical systems where not only precise measurement but also a permanently stable installation situation is required.

Why should you choose this specific version?

This version is particularly useful when precise and proven temperature measurement with a Pt100 sensor is required. The Pt100 used according to DIN EN 60751 in Class B is one of the established solutions in industrial temperature measurement technology and is suitable for many common applications. The three-wire circuit is advantageous when line resistances need to be compensated more effectively than with a simple two-wire circuit. This supports the most accurate possible temperature measurement during operation.

The connection cable is also designed for practical use. The silicone cable is suitable for a temperature range from -50 to +200 °C and therefore offers good application possibilities in environments with low or elevated temperatures. With a cable length of 2500 mm, there is also sufficient flexibility for connection to downstream evaluation or control technology. The cable end with ferrules according to DIN 46228 Part 4 supports clean and simple electrical connection.

The 6 mm thermowell diameter and the installation length of 100 mm make this version suitable for many common installation situations. Together with the G1/2 process connection, this results in a proven solution for applications where temperature must be monitored reliably and permanently. This is an important advantage, especially in technical systems with liquid or gaseous media.

Type: 902050/10-380-1001-1-6-100-104-11-2500/316