JUMO T-piece DN25, PVC (incl. union nut, O-ring, glue-in bushing)

If you are looking for a conductive 2-electrode conductivity sensor for typical water and industrial applications and value K = 0.1, integrated Pt100, G 3/4" A threaded connection, PVC body, and stainless steel 1.4571, this JUMO ecoLine CR-PVC version is an excellent choice. JUMO ecoLine CR-PVC conductivity sensor with cell constant K = 0.1, Pt100, threaded connection G 3/4" A, PVC body, and stainless steel 1.4571 cell material This CR-PVC conductivity sensor is designed for conductive conductivity measurement in water and process applications. It operates according to the proven 2-electrode principle and is particularly suitable for applications where reliable conductivity measurement in the low measuring range is required. Thanks to the design with cell constant K = 0.1, integrated Pt100, threaded connection G 3/4" A, PVC body, and stainless steel 1.4571 cell material, this version is tailored to typical tasks in water technology and industrial circulation systems. Technical data Measurement principle: Conductive 2-electrode conductivity sensor Cell constant: K = 0.1 Typical measuring range: 0 ... 1.0 mS/cm Temperature compensation: with Pt100 Process connection: Threaded connection G 3/4" A Body material: PVC Cell material: Stainless steel 1.4571 Operating temperature: up to 55 °C Maximum pressure: 6 bar at 25 °C Advantages and special features of the JUMO ecoLine A key advantage of this version lies in its suitability for measuring ranges up to 1.0 mS/cm. This makes it particularly interesting for applications in which lower conductivity values must be measured precisely. In the stainless steel version with K = 0.1, the sensor has three metallic pin electrodes. The two outer pins are electrically connected and form one pole of the 2-electrode conductivity sensor, while the central stainless steel pin serves as the counter electrode. According to your information, this design achieves high measurement precision and low stray fields. This makes the version particularly attractive for users who value clean and stable measurements. Why should you choose this conductivity sensor from JUMO? This version is particularly useful when a proven solution for industrial use is required that can measure not only conductivity but also temperature directly. The integrated Pt100 enables simultaneous measurement of the medium temperature, which is a clear advantage for temperature compensation in downstream measuring amplifiers. This is especially practical in applications where conductivity must be considered temperature-dependent. The PVC body limits use to medium temperatures up to 55 °C but offers a proven design for many typical water and process applications. The mechanical integration is also designed for practical use. The threaded connection G 3/4" A is one of the common connection sizes and is suitable for many standard installation situations. The sensor is designed for a maximum pressure of 6 bar at 25 °C and is therefore suitable for numerous industrial applications. Together with stainless steel 1.4571 as the cell material, this results in a robust and proven design for everyday use. Typical areas of application Areas of application include general water technology, cooling and air-conditioning technology, drinking and bathing water systems, as well as industrial rinsing and process water circuits. Wherever conductivity in the lower measuring range must be monitored reliably, this version is particularly interesting. Thanks to the combination of K = 0.1 and Pt100, the sensor is especially suitable for applications requiring precise conductivity measurement and simultaneous temperature detection. JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 5 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions What can I measure with this conductivity sensor? You can use the sensor to monitor the conductivity of water and process media. For which applications is this sensor suitable? It is suitable for water technology, cooling and air conditioning systems, as well as drinking water, bathing water, and process water applications. Why is a temperature sensor already integrated? The integrated Pt100 also measures the temperature of the medium and supports temperature compensation. Is the sensor easy to clean or replace? Yes. The plug-in design allows for quick removal for cleaning and maintenance. What is the maximum operating temperature for the sensor? The sensor is designed for medium temperatures up to 55 °C.

If you are looking for a conductive 2-electrode conductivity sensor for typical water and industrial applications and value K = 0.1, integrated Pt100, PVC stepped collar Ø32/DN25, PVC body, and stainless steel 1.4571, this JUMO ecoLine CR-PVC version is an excellent choice. JUMO ecoLine CR-PVC conductivity sensor with cell constant K = 0.1, Pt100, PVC stepped collar Ø32/DN25, PVC body, and stainless steel 1.4571 cell material This JUMO ecoLine CR-PVC conductivity sensor is designed for conductive conductivity measurement in water and process applications. It operates according to the proven 2-electrode principle and is particularly suitable for applications where lower conductivity values must be measured reliably and precisely. Thanks to the design with cell constant K = 0.1, integrated Pt100, PVC stepped collar Ø32/DN25, PVC body, and stainless steel 1.4571 cell material, this version is tailored to typical tasks in water technology and industrial circulation systems. Technical data Measurement principle: Conductive 2-electrode conductivity sensor Cell constant: K = 0.1 Typical measuring range: 0 ... 1.0 mS/cm Temperature compensation: with Pt100 Process connection: PVC stepped collar Ø32/DN25 Body material: PVC Cell material: Stainless steel 1.4571 Operating temperature: up to 55 °C Maximum pressure: 6 bar at 25 °C Special features and advantages of the JUMO ecoLine A key advantage of this version lies in its suitability for measuring ranges up to 1.0 mS/cm. This makes it particularly interesting for applications where low conductivity values must be monitored reliably. In the stainless steel version with K = 0.1, the sensor has three metallic pin electrodes. The two outer pins are electrically connected and form one pole of the 2-electrode conductivity sensor, while the central stainless steel pin serves as the counter electrode. This design achieves high measurement precision and low stray fields. This makes the version particularly attractive for users who value stable and clean measurement values. The integration into the measuring point is also designed for practical use. The plug-in version with PVC stepped collar Ø32/DN25 is intended for use with suitable PVC T-pieces and allows quick removal of the sensor for cleaning or maintenance. This is a clear advantage during operation when the sensor needs to be removed without great effort. Together with stainless steel 1.4571 as the cell material, this results in a robust and proven design for everyday use. Why should you choose this conductivity sensor from JUMO? This version is particularly useful when a proven solution for industrial use is required that can measure not only conductivity but also temperature directly. The integrated Pt100 enables simultaneous measurement of the medium temperature, which is a clear advantage for temperature compensation in downstream measuring amplifiers. This is especially practical in applications where conductivity must be evaluated depending on temperature. The PVC body limits use to medium temperatures up to 55 °C and offers a proven design for many typical water and process applications. Typical areas of application Water technology Cooling and air-conditioning technology Drinking and bathing water systems as well as industrial rinsing and process water circuits This sensor is used wherever conductivity in the lower measuring range must be monitored reliably. Thanks to the combination of K = 0.1, Pt100, and the plug-in installation design, the sensor is especially suitable for applications requiring precise conductivity measurement, temperature detection, and easy maintenance. JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 5 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions What can I measure with this conductivity sensor? You can use the sensor to monitor the conductivity of water and process media. For which applications is this sensor suitable? It is suitable for water technology, cooling and air conditioning systems, as well as drinking water, bathing water, and process water applications. Why is a temperature sensor already integrated? The integrated Pt100 also measures the temperature of the medium and supports temperature compensation. Is the sensor easy to clean or replace? Yes. The plug-in design allows for quick removal for cleaning and maintenance. What is the maximum operating temperature for the sensor? The sensor is designed for medium temperatures up to 55 °C.

If you are looking for a conductive 2-electrode conductivity sensor for typical water and industrial applications and value K = 1.0, integrated Pt100, PVC stepped collar Ø32/DN25, PVC body, and graphite, this JUMO ecoLine CR-PVC version is an excellent choice. JUMO ecoLine CR-PVC conductivity sensor with cell constant K = 1.0, Pt100, PVC stepped collar Ø32/DN25, PVC body, and graphite cell material This JUMO ecoLine CR-PVC conductivity sensor is designed for conductive conductivity measurement in water and process applications. It operates according to the proven 2-electrode principle and is particularly suitable for applications where conductivity values in an extended measuring range must be measured reliably. Thanks to the design with cell constant K = 1.0, integrated Pt100, PVC stepped collar Ø32/DN25, PVC body, and graphite as the cell material, this version is tailored to typical tasks in water technology and industrial circulation systems. Special features and advantages of the JUMO ecoLine A key advantage of this version lies in its typical measuring range from 0.01 to 15 mS/cm. This makes it particularly interesting for applications where higher conductivity values must be monitored reliably. In this version, graphite is used as the electrode material. The graphite electrodes are fully integrated into the electrode shaft and are especially suitable for the above-mentioned measuring ranges, where this design demonstrates its strengths particularly well. This makes the sensor a suitable solution for users requiring robust and practical conductivity measurement in industrial applications. The integration into the measuring point is also designed for practical use. The plug-in version with PVC stepped collar Ø32/DN25 is intended for use with suitable PVC T-pieces and allows quick removal of the sensor for cleaning or maintenance. This is especially practical during operation when the sensor needs to be removed without great effort. The delivery does not include a union nut. Why should you choose this conductivity sensor from JUMO? This version is particularly useful when, in addition to conductivity, the temperature must also be measured directly. The integrated Pt100 enables simultaneous measurement of the medium temperature and therefore provides the basis for temperature compensation in downstream measuring amplifiers. This is a clear advantage, especially in applications where conductivity changes with temperature. The PVC body limits use to medium temperatures up to 55 °C and offers a proven design for many typical water and process applications. Typical areas of application General water technology Cooling and air-conditioning technology, drinking and bathing water systems Industrial rinsing and process water circuits This sensor can be used wherever conductivity in a range from 0.01 to 15 mS/cm must be monitored reliably. Thanks to the combination of K = 1.0, Pt100, and the plug-in installation design, the sensor is especially suitable for applications requiring conductivity measurement, temperature detection, and easy maintenance. Technical data Measurement principle: Conductive 2-electrode conductivity sensor Cell constant: K = 1.0 Typical measuring range: 0.01 ... 15 mS/cm Temperature compensation: with Pt100 Process connection: PVC stepped collar Ø32/DN25 Note on scope of delivery: Delivered without union nut Body material: PVC Cell material: Graphite Operating temperature: up to 55 °C Maximum pressure: 6 bar at 25 °C Electrical connection: Connector according to DIN EN 175301-803 (Hirschmann connector) JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 5 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions What can I measure with this conductivity sensor? You can use the sensor to monitor the conductivity of water and process media. For which applications is this sensor suitable? It is suitable for water technology, cooling and air conditioning systems, as well as drinking water, bathing water, and process water applications. Why is a temperature sensor already integrated? The integrated Pt100 also measures the temperature of the medium and supports temperature compensation. Is the sensor easy to clean or replace? Yes. The plug-in design allows for quick removal for cleaning and maintenance. What is the maximum operating temperature for the sensor? The sensor is designed for medium temperatures up to 55 °C.

JUMO 25 Meter Connection Cable JUMO 25 meter connection cable - Ideal for sensors, measuring devices or controllers with 4-wire connection This JUMO connection cable with a length of 25 meters is designed for the electrical connection of suitable sensors or measuring components to the connected evaluation unit. Thanks to the 4-wire design with additional shielding, it is particularly suitable for applications where reliable signal transmission must be ensured even over longer distances. Technical data Length: 25 meters Version: Connection cable Number of wires: 4-wire Additional feature: Shielded Advantages and special features of the JUMO connection cable A major advantage of this cable is its generous length. This is especially practical when a greater distance must be bridged between the sensor and the evaluation unit and a shorter standard cable is not sufficient. The shielded design supports secure and interference-free signal transmission, which can be an important factor in industrial or technical applications. Why should you choose this connection cable? This version is particularly useful when a suitable cable is required for longer installation distances. The combination of 25 meters in length, 4 wires and shielding makes it a practical solution for measuring points where reliable connectivity and clean cable routing are important. Especially in permanently installed applications, this can be a clear advantage. Such a cable is also useful in daily operation when sensors cannot be mounted directly near the evaluation or control technology. It provides greater flexibility in planning the measuring point and can help securely connect suitable components even over longer distances. Frequently Asked Questions What equipment can I use it with? Ideal for sensors, measuring instruments or control units with a 4-wire connection. Is the cable shielded? Yes, the cable has a shield that reduces interference. Is the cable easy to install? Yes, the cable is flexible enough for use in conduits, cable ducts or for open-lay installation. Is the cable robust enough for workshop or industrial use? Yes, it withstands normal wear and tear in protected environments. Is the cable available in other lengths? We currently offer 25-metre and 50-metre versions. How can I correctly identify the individual wires when connecting them? Each of the four wires is colour-coded; the instructions will help you with the connection.

JUMO 50 Meter Connection Cable JUMO 50 meter connection cable - Ideal for sensors, measuring devices or controllers with 4-wire connection This JUMO connection cable with a length of 50 meters is designed for the electrical connection of suitable sensors or measuring components to the connected evaluation unit. Thanks to the 4-wire design with additional shielding, it is particularly suitable for applications where reliable signal transmission must be ensured even over longer distances. Technical data Length: 50 meters Version: Connection cable Number of wires: 4-wire Additional feature: Shielded Advantages and special features of the JUMO connection cable A major advantage of this cable is its length. This is especially practical when a greater distance must be bridged between the sensor and the evaluation unit and shorter standard cables are not sufficient. The shielded design supports interference-free signal transmission, which can be an important factor in industrial and technical applications. Why should you choose this JUMO connection cable? This version is particularly useful when a suitable cable is required for longer installation distances. The combination of 50 meters in length, 4 wires and shielding makes it a practical solution for measuring points where reliable connectivity and clean cable routing are important. Especially in permanently installed applications, this offers greater flexibility during planning. Areas of application Such a cable is also useful in daily operation when sensors cannot be mounted directly near the evaluation or control technology. It provides greater flexibility when positioning the components and helps securely connect suitable devices even over longer distances. Anyone looking for a shielded connection cable with a length of 50 meters for suitable JUMO sensors or measuring components receives a practical solution for long connection paths and reliable signal transmission with this version. Frequently Asked Questions What equipment can I use it with? Ideal for sensors, measuring instruments or control units with a 4-wire connection. Is the cable shielded? Yes, the cable has a shield that reduces interference. Is the cable easy to install? Yes, the cable is flexible enough for use in conduits, cable ducts or for open-lay installation. Is the cable robust enough for workshop or industrial use? Yes, it withstands normal wear and tear in protected environments. Is the cable available in other lengths? We currently offer 25-metre and 50-metre versions. How can I correctly identify the individual wires when connecting them? Each of the four wires is colour-coded; the instructions will help you with the connection.