Testomat 2000® Antox-solution 2 x 100 ml bottle for TESTOMAT 2000® Antox. Concentrations of oxidising agents, such as chlorine, chlorine dioxide or ozone, above TVO-approved (German drinking water ordinance) limit values have a detrimental effect on the dye contained in Testomat 2000® reagents. Exact determination of the water hardness is therefore no longer guaranteed, and the Testomat instrument displays the error message ‘measuring fault analysis’ (MST analysis). To execute the measurement correctly, a reducing agent must be added.   Testomat 2000® Antox is a special version of Testomat 2000® with an additional pump for dosing a reducing agent. An oxidising agent fault is prevented prior to each analysis by adding a reducing agent to the filled measuring chamber. The further analysis of the water hardness measurement is then continued according to the standard procedure.    

Cleaning reagent in 500ml-bottle for Testomat 2000® Self clean Testomat 2000® self clean is a special version of Testomat 2000® with an additional dosing pump for cleaning or disinfecting agents after an analysis. It can be used to remove possible pollution of the measuring chamber and the drain hose. After a preset number of analysis cycles, the measuring chamber is rinsed and the agent is added to the water in the measuring chamber. After a reaction time of 30 seconds, the content of the measuring chamber is dumped. The measuring chamber is subsequently rinsed twice.    

The 100 ml bottle of original Testomat indicator TH 2005 for the limit value 0.5- 0.5°dH only for Testomat EVO TH and Testomat LAB TH. One packing unit contains 2 bottles á 100ml.

The 500 ml bottle of original Testomat indicator TH 2005 for the limit value 0.5 - 5.0 °dH only for Testomat EVO TH and Testomat LAB TH.