Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting.
The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water.
Outstanding features:
Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection.
Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms.
Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance.
Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply.
UV lamp 25W: Insert for UV2100 and TRIO UV 25W
UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W
Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting.
The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water.
Outstanding features:
Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection.
Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms.
Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance.
Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply.
UV lamp 25W: Insert for UV2100 and TRIO UV 25W
UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.
The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.
The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.
The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.
OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals
OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals
OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals
OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals
The LAB2B is a corona discharge type ozone generator with variable ozone output up to 10 g/h ozone in oxygen and 4 g/h ozone using dried air. The air-cooled ozone generator is enclosed in an compact desktop housing for bench use. ApplicationsResearch and development Education Laboratories Technology and how it worksThe Ozone generator LAB2B is built in a small desktop housing with air cooler, especially suited for laboratory application. The instrument consists of operation displays, flow meter for the feedgas and a controller for the variable power adjustment. The ozone output is adjustable via a rotary knob at the font side of the housing. The LAB2B can be operated with oxygen or dried air.Ozone is produced when oxygen containing gas is passed over the ceramic dielectric of an ozone generating module. The module is powered by a high voltage/high frequency power board.The ceramic dielectric is housed within a finned heat sink block which is air cooled by fan assisted atmospheric air. Technical features Variable ozone production up to 10 g/h Operating method: vacuum or pressure (10psi max.) Illuminating switches indicating ozone production and faults Ozone generating module cooling medium: ambient air (fan assisted) O&M manual including performance graphs Feedgas: oxygen or dried air Dimensions: (LxWxD): 230 mm x 300 mm x 160 mm Connections: PVDF compression fitting to suit 8 mm pipe / tube Flowmeter: 2-10 l/min Enclosure: 316 mild steel, epoxy-coated Ozone generating module: 316 stainless steel electrode assembly inside a ceramic dielectric tube Remote controls and signalsOzone ON-OFF: green illuminator switch Fault: red illuminator switch Power supply230 VAC, 50-60 Hz
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone output:
3-4 g/h (single-cell version)
|
Version:
Component unit
Ozonia* Membrel MkV ozone generation plant based on the catalytic water electrolysis process; suitable for sterilization and sanitization of ultrapure water in ring piping systems in the pharmaceutical and semiconductor industriesThe plant consists of 1, 2 or 3 current-regulated electrolysis cells including electrode set (anode, cathode and solid electrolyte membrane) and an electric feeder. Ozone production per cell: 3-4 g/h Feed water flow per cell: nom. 100 l/h Feed water conductance: < 20 μS/cm Operating pressure: max. 6 bar Electrical power per cell: 460 W/ 230 VAC, 50-60 Hz Ozone power setting: 8-100%Control functions (floating): System ON/OFF; control and set point LOCAL/REMOTE supply ON/OFF /collective alarm Control function (4-20 mA): electrolysis current for ozone production Component plant MkV-K consisting of: an electrolytic cell made of PVDF / titanium / stainless steel (316L) with temperature monitoring Connections feed water and ozone-strong water: TriClamp TC25 ID 6 mm n. DIN 32676-A Connections hydrogen and waste water: SERTO for pipe 10 x 1 mm for installation in the pipeline bypass (flow meter and control valve to be supplied by the customer) Electrical power supply unit with power supply, controller unit and emergency battery in IP 54 stainless steel housing, 0.50 m connection cable for electrolysis cells*Trademark of Veolia; may be registered in one or more countries.