JUMO screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection
€209.80*
Please log in to receive your conditions.
Available in 28 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "JUMO screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection"
Screw-in resistance thermometer with programmable transmitter and measuring range: -50 to +150 °C
JUMO Dtrans T100 screw-in resistance thermometer with programmable transmitter and M12 x 1 machine connector, Type: 902815/20-370-1013-2-6-50-104-24/000
This version combines a temperature sensor and transmitter in one compact unit. As a result, the JUMO Dtrans T100 is particularly suitable for applications where temperature values need to be measured directly and transmitted as a linear output signal. Equipped with a Pt1000 in four-wire circuit, programmable transmitter, and M12 x 1 machine connector, this version is designed for precise and practical integration into industrial systems.
Thanks to its compact design with an insertion length of 50 mm, this version is particularly suitable for measuring points with limited installation space. It can be used wherever a space-saving solution is required while benefiting from the advantages of an integrated transmitter.
Technical data
- Design: Screw-in resistance thermometer with programmable transmitter
- Measuring insert: 1x Pt1000
- Circuit type: Four-wire circuit
- Tolerance class: Class A
- Measuring range: -50 to +150 °C
- Protection tube diameter: 6 mm
- Insertion length: 50 mm
- Connection: M12 x 1 machine connector
- Protection tube material: Stainless steel 316 L (1.4404/1.4435)
- Protection class: IP67 with connected machine connector
- Type addition: none
- Configuration: USB interface with setup software
Advantages and technical features of the JUMO screw-in resistance thermometer
- Integrated programmable transmitter
- M12 x 1 machine connector for plug-in connection
- IP67 protection class with connected machine connector
- USB interface for configuration with setup software
- Protection tube made of stainless steel 316 L
The integrated two-wire transmitter makes this version especially attractive when a temperature-linear output signal of 4 to 20 mA or 20 to 4 mA is required. Using the USB interface, the device can be configured with setup software. Parameters such as measuring range, fine adjustment, or measuring circuit monitoring can therefore be adapted specifically to the respective application. This is especially useful where measuring points must not only operate reliably but also remain flexible in configuration.
The actual temperature measurement is carried out using a Pt1000 in a four-wire circuit. Combined with tolerance class A, this version is suitable for applications where highly accurate temperature measurement is required. The measuring range of -50 to +150 °C covers many typical tasks in technical and industrial applications.
The connection side is also designed for everyday industrial use. The M12 x 1 machine connector enables a clean and plug-in electrical connection. With the machine connector attached, this version achieves IP67 protection and is therefore suitable for environments where protected connectivity is important. The protection tube made of stainless steel 316 L additionally ensures a robust and durable design.
Typical application areas
- Compact industrial measuring points
- Machines and technical systems
- Applications with integrated transmitter
- Temperature monitoring in liquid and gaseous media
- Measuring points with plug-in sensor connection
- Applications requiring a configurable output signal
Dimensions
| Height | 3 cm |
|---|---|
| Length | 22 cm |
| Width | 16 cm |
Weight
| Weight | 100 g |
|---|
Other attributes
| Country of origin | DE |
|---|---|
| Customs tariff number | 90251900 |
| Einbaulänge in mm | 50 mm |
| Messeinsatz | 1x Pt 1000 Vierleiterschaltung |
| Prozessanschluss Verschraubung | G 1/2 |
| Temperaturbereich | -50°C ... +150°C |
|
Electrical connection: |
Machine connector M12 × 1, 4-pin according to IEC 60947-5-2 |
|
Process connections: |
G 3/8" threaded connection G 1/2" screw connection G 1/2" screw connection with CIP-compliant sealing cone G 1/2" screw connection with CIP-compliant PEEK sealing cone Conical connection with union nut (milk pipe screw connection) Clamp DIN 32676 Ball weld-in socket with compression fitting Weld-in socket with CIP-compliant sealing cone VARIVENT®a connections* JUMO PEKA ball welding socket - Hygienic process connection |
|
Thermowells: |
Stainless steel 316 L, material no. 1.4404/1.4435 Stainless steel 316 Ti, material no. 1.4571 (on request) |
|
Protection class: |
IP67 to DIN EN 60529 with plug-in machine connector |
|
Response times: |
Protection tube standard t0.5 = 5 s; t0.9 = 12 s; in water 0.4 m/s Protection tube remote t0.5 = 2 s; t0.9 = 5 s; in water 0.4 m/s Protection tube standard t0.5 = 40 s; t0.9 = 110 s; in air 3.0 m/s Protection tube lowered t0.5 = 21 s; t0.9 = 70 s; in air 3.0 m/s Flush-mounted sensor PA 387 t0.5 = 140 s; t0.9 = 380 s; in air 3.0 m/s Flush-mounted sensor PA 388 t0.5 = 0.7 s; t0.9 = 6 s; in water 0.4 m/s |