JUMO screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection
€255.02*
Please log in to receive your conditions.
Available in 28 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "JUMO screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection"
JUMO Dtrans T100 screw-in resistance thermometer with programmable transmitter and M12 x 1 machine connector
Resistance thermometer with screw-in mounting and 200 mm insertion length for temperature measurement at deeper measuring points, Type: 902815/20-370-1013-2-6-200-104-24/000
With this version of the screw-in resistance thermometer, you receive a measuring unit with programmable transmitter for precise industrial temperature measurements. With 200 mm insertion length, Pt1000 in four-wire circuit, G 1/2 screw connection and M12 x 1 plug connection, this version is particularly suitable for measuring points with deeper measuring positions and direct signal transmission.
This version is intended for measuring tasks where the temperature sensor needs to reach further into the medium. With a 200 mm insertion length, the JUMO Dtrans T100 is particularly suitable for applications where the measuring point is deeper than usual and reliable measurement should not take place directly at the screw-in point. At the same time, the connection via the M12 x 1 machine connector remains compact and practical.
A Pt1000 in four-wire circuit operates inside the sensor. This makes the version interesting for applications where the most accurate possible temperature measurement is required. The measurement is supported by tolerance class A. The measuring range from -50 to +150 °C is suitable for many industrial applications where temperatures in liquid or gaseous media must be monitored.
Technical data
- Design: Screw-in resistance thermometer with programmable transmitter
- Measuring insert: 1x Pt1000
- Circuit type: Four-wire circuit
- Tolerance class: Class A
- Measuring range: -50 to +150 °C
- Protection tube diameter: 6 mm
- Insertion length: 200 mm
- Process connection: G 1/2
- Protection tube material: Stainless steel 316 L (1.4404/1.4435)
- Connection: M12 x 1 machine connector
- Protection class: IP67 with connected machine connector
- Type addition: none
- Configuration: USB interface with setup software
- Conformity: EU and China RoHS compliant
Advantages and technical features of the JUMO Dtrans T100
- 200 mm insertion length for deeper measuring points
- Well suited for applications with higher accuracy requirements
- Easy adjustment via USB and setup software
- Robust design for long-term industrial use
The integrated programmable transmitter is particularly practical. It provides a linear output signal of 4 to 20 mA or 20 to 4 mA and can be configured via the USB interface using setup software. This allows the device to be adapted to different requirements, for example when parameterizing the measuring range, fine adjustment or measuring circuit monitoring.
The mechanical design is also tailored to everyday industrial use. The protection tube made of stainless steel 316 L ensures a robust and durable design, while the G 1/2 screw connection supports secure integration into the measuring point. The pluggable M12 x 1 connection also makes integration into existing systems easier and keeps the connection particularly uncomplicated. With the machine connector attached, IP67 protection is achieved.
This version demonstrates its strengths especially where temperature values are not only measured but also transmitted directly as a signal to a control system or evaluation unit. The longer design expands the possible applications wherever measurements need to be taken deeper inside the medium.
Typical application areas
- Temperature measurements in deeper pipelines or containers
- Machines and process engineering systems
- Industrial applications with pluggable sensor connection
- Temperature monitoring in liquid and gaseous media
- System areas where flexible parameterization is required
Dimensions
| Height | 4 cm |
|---|---|
| Length | 27,5 cm |
| Width | 19,5 cm |
Weight
| Weight | 150 g |
|---|
Other attributes
| Country of origin | DE |
|---|---|
| Customs tariff number | 90251900 |
| Einbaulänge in mm | 200 mm |
| Messeinsatz | 1x Pt 1000 Vierleiterschaltung |
| Prozessanschluss Verschraubung | G 1/2 |
| Temperaturbereich | -50°C ... +150°C |
|
Electrical connection: |
Machine connector M12 × 1, 4-pin according to IEC 60947-5-2 |
|
Process connections: |
G 3/8" threaded connection G 1/2" screw connection G 1/2" screw connection with CIP-compliant sealing cone G 1/2" screw connection with CIP-compliant PEEK sealing cone Conical connection with union nut (milk pipe screw connection) Clamp DIN 32676 Ball weld-in socket with compression fitting Weld-in socket with CIP-compliant sealing cone VARIVENT®a connections* JUMO PEKA ball welding socket - Hygienic process connection |
|
Thermowells: |
Stainless steel 316 L, material no. 1.4404/1.4435 Stainless steel 316 Ti, material no. 1.4571 (on request) |
|
Protection class: |
IP67 to DIN EN 60529 with plug-in machine connector |
|
Response times: |
Protection tube standard t0.5 = 5 s; t0.9 = 12 s; in water 0.4 m/s Protection tube remote t0.5 = 2 s; t0.9 = 5 s; in water 0.4 m/s Protection tube standard t0.5 = 40 s; t0.9 = 110 s; in air 3.0 m/s Protection tube lowered t0.5 = 21 s; t0.9 = 70 s; in air 3.0 m/s Flush-mounted sensor PA 387 t0.5 = 140 s; t0.9 = 380 s; in air 3.0 m/s Flush-mounted sensor PA 388 t0.5 = 0.7 s; t0.9 = 6 s; in water 0.4 m/s |