500 ml-bottles of original Reagent set PO4 2100 A + B can be used immediately in the Testomat 2000®® PO4 without cumbersome filling and refilling.   Measuring range: Phosphate PO4: 0.0 - 10.0 mg/l

Bulk container - 5L canisterTo use the canister, the suction lance (art. no.: 40536) is required.

Bulk container - 20 litre canisterTo use the canister, the suction lance (art. no.: 40535) is required.

for bulk container reagent A PO4 (20 liter container)

for large containers of reagent B PO4 (5 liter containers)

Connection set with ball valve, hoses and reducers for water connection. This connection set contains everything you need for quick connection of the Testomat 2000®, Testomat ECO®, EVO and Titromat® devices. Contents: 5 m PE 6/4x1 plastic pipe, blue 2 m drain hose, diameter = 12 mm 1 ball valve, PPSV 011223W 1 reducer connector, 10 to 6 mm 1 reducer nipple, 3/8‘-1/2’ Frequently asked questions What do I need the connection set for? For quick and complete connection of your device to the water supply. Does the set fit my Testomat or Titromat device? Yes, it is suitable for several models such as 2000®, ECO®, EVO, LAB, Limit and Titromat® devices. What is included in the set? Hoses, ball valve and matching connecting pieces for the water connection. Do I need to buy anything else? No, the set contains everything for direct connection. Is the installation complicated? No, the parts are coordinated with each other and easy to assemble. Can I also use the set for existing systems? Yes, ideal for retrofitting or replacing old connections. What advantage do I get with the set? You save time and avoid wrong purchases with perfectly matched components.

Frequently asked questions What is the runoff funnel needed for? He ensures that the water is clean and controlled when drained from the device. For which devices is the discharge funnel suitable? It fits with Testomat 2000 and ECO devices. Is the discharge chute a spare part? Yes, it serves as a complete replacement in case of wear or damage. Is the assembly complicated? No, the funnel can be easily replaced and inserted. Why should I regularly check the discharge funnel? So that the flow doesn't get clogged and the device can work reliably. What happens with a faulty runoff funnel? The water cannot drain properly and disruptions may occur. Is the discharge hopper delivered complete? Yes, it is a complete unit that can be used directly.

Plug-in card for a current interface, suitable for Testomat 2000® and Titromat® instruments.   Technical Data output current: 0-20mA or 4-20mA maximum load: 500 Ohm galvanic isolation   Usable in following devices: Testomat 2000®, Testomat 2000® CAL, Testomat 2000® CLF, Testomat 2000® CLT, Testomat 2000® CrVI, Testomat 2000® DUO, Testomat 2000® Fe, Testomat 2000® SO3,  Testomat 2000® Self clean, Testomat 2000 THCL®, Testomat 2000® CLO2, Testomat 2000® Br2   Frequently asked questions What do I need the SK910 power interface for? To transmit measured values as a current signal to other systems. What devices is the interface compatible with? Plug-in card for a power interface, suitable for Testomat 2000® and Titramat® devices. Suitable for the following devices: Testomat 2000®, Testomat 2000® CAL, Testomat 2000® CLF, Testomat 2000® CLT, Testomat 2000® CrVI, Testomat 2000® DUO, Testomat 2000® Fe, Testomat 2000® SO3, Testomat 2000® Self clean, Testomat 2000 THCL®, Testomat 2000® CLO2, Testomat 2000® Br2, etc. What output signals are available? 0-20 mA or 4-20 mA, depending on the application. What does galvanic isolation mean? It protects connected devices from interference and electrical influences. Is the installation complicated? No, the plug-in card can be easily inserted into the device. What do I use the power signal for in everyday life? For monitoring, controlling or further processing of measurement values. What advantage does the interface offer? It enables reliable integration into existing systems.

Annual Service Set for Testomat® EVO TH, 2000 & ECO / Titromat® Annual Recommended Maintenance Package for High Operational Reliability The annual service set for Testomat 2000®, Testomat ECO®, Titromat®, and Testomat® EVO TH includes all essential wear parts required for yearly maintenance. The set includes: 1 x Seal Kit T2000 2 x Sight Glass 30x3 3 x Disc Plugs 5.3dx5 PE natural 1 x Valve Set for Injection Pump 1 x Inlet Filter 19.5dx25 Recommended Maintenance Package for Annual Service of Your Water Analysis Devices The annual service set for Testomat® EVO TH, Testomat® 2000, Testomat® ECO, and Titromat® contains all essential wear parts that should be replaced as part of the yearly recommended maintenance. It ensures reliable operation and helps maintain measurement accuracy at a consistently high level. Regular replacement of the included components prevents unplanned downtime, allows efficient planning of maintenance intervals, and sustainably increases the operational reliability of the devices. Advantages of the Annual Service Set for Testomat® & Titromat® Devices The annual service set offers a practical, all-in-one solution with all relevant spare parts for yearly maintenance. Wear parts such as seals, sight glasses, disc plugs, and valve components can be replaced quickly without the need for additional spare parts. This reduces downtime, simplifies on-site maintenance processes, and ensures consistently high measurement quality in industrial and commercial water treatment. At the same time, the set supports economical and preventive maintenance of Heyl Testomat® and Titromat® devices. Frequently asked questions Are there any differences between service sets for the Testomat 808 and the Testomat 808 SiO2? Yes, as they do not automatically have the same spare parts. More detailed lists can also be found in the respective operating instructions under ‘Spare parts lists’. What are service sets for? They are designed to enable regular maintenance and minor repairs to be carried out independently. Regular servicing can significantly increase the service life of your Testomat. What does the service set or maintenance kit contain? The exact contents of the service sets and maintenance kits can be seen in the pictures or in the item descriptions listed in the shop. Can individual components also be ordered? Yes, that is possible. Please send us the item numbers or the exact item description by email: vertrieb@heylneomeris.de Can I also order a service set or maintenance kit and have the service carried out by a service partner? Yes, this is possible. Please let us know the exact location of the Testomat device so that we can find the service partner for your region. HeylNeomeris has a Germany-wide service partner network as well as service partners in Austria.

Service Set for Testomat® EVO TH, Testomat® 2000®, Testomat® ECO® & Titromat® Complete Service Set for Regular Professional Maintenance of Your Water Analysis Devices The service set contains all essential spare parts and wear components required for the regular maintenance of your Testomat 2000®, Testomat ECO®, Titromat®, or Testomat® EVO TH devices. The service set includes: 1 x T2000 Seal Kit 2 x Sight Glasses 30x3 1 x Complete Flow Regulator Core 3 x Plugs for Measuring Chamber 1 x Valve Set for Injection Pump 1 x Inlet Filter Screen 19.5dx25 3 x Various Pipes 1 x Cleaning Brush Set Why is Regular Maintenance of Water Analysis Devices Important? Regular maintenance is essential for measurement accuracy, operational reliability, and the lifespan of water analysis devices. Wear parts such as seals, sight glasses, or valves naturally degrade over time due to water, chemicals, and mechanical stress. With a professional service set, you ensure that your Testomat® EVO TH, Testomat® 2000®, Testomat® ECO®, or Titromat® consistently delivers reliable measurement results, prevents unplanned downtime, and allows maintenance intervals to be followed efficiently. Advantages of the Service Set for Testomat® & Titromat® Devices The service set contains all essential spare and wear parts required for comprehensive maintenance. Replacing components on a planned maintenance cycle helps prevent measurement deviations early and maintains the functional reliability of the analysis devices. Additionally, the set reduces organizational effort because all relevant parts are included in a single package. This saves time on procurement, minimizes downtime, and supports economical and safe operation in industrial and commercial water treatment systems. Frequently asked questions Are there any differences between service sets for the Testomat 808 and the Testomat 808 SiO2? Yes, as they do not automatically have the same spare parts. More detailed lists can also be found in the respective operating instructions under ‘Spare parts lists’. What are service sets for? They are designed to enable regular maintenance and minor repairs to be carried out independently. Regular servicing can significantly increase the service life of your Testomat. What does the service set or maintenance kit contain? The exact contents of the service sets and maintenance kits can be seen in the pictures or in the item descriptions listed in the shop. Can individual components also be ordered? Yes, that is possible. Please send us the item numbers or the exact item description by email: vertrieb@heylneomeris.de Can I also order a service set or maintenance kit and have the service carried out by a service partner? Yes, this is possible. Please let us know the exact location of the Testomat device so that we can find the service partner for your region. HeylNeomeris has a Germany-wide service partner network as well as service partners in Austria.

Maintenance & Repair Kit for TESTOMAT® / TITROMAT® Comprehensive Maintenance and Repair Kit for Professional Servicing The maintenance and repair kit combines a wide range of spare and wear parts for Testomat® and Titromat® devices. The kit covers all components required for service work on the Testomat device family and the Titromat from Heyl. The kit includes: 10 x O-Ring 20x2 10 x O-Ring 10.82x1.78 5 x O-Ring 4.47x1.78 5 x O-Ring 18x2 EPDM 20 x Flat Gasket 24x2 5 x Inlet Filter Screen 19.5dx25 5 x Flow Regulator Core 2 x Spring for Inlet 15 x Plugs for Measuring Chamber 6 x Fuse, T 0.08A 6 x Fuse, T 0.1A 6 x Fuse, T 0.16A 6 x Fuse, T 0.2A 6 x Fuse, T 0.315A 6 x Fuse, T 1.0A 6 x Fuse M4A 20 x Sight Glass 30x3 3 x Screw Cap with T2000 Insert 4 x Screw M3x40 1 x Suction Hose 1 x Pressure Hose 6 x Various Pipes 1 x Cleaning Brush Set 2 x Plug-In Elbow Connectors 2 x Magnetic Stirring Cores Professional Maintenance and Repair of Testomat® and Titromat® Devices The maintenance and repair kit for TESTOMAT® and TITROMAT® was specifically designed for professional service use. It combines a comprehensive selection of spare and wear parts needed for regular maintenance, servicing, and repairs of the device family. Thanks to its complete equipment, the kit is ideal for service technicians, maintenance staff, and operators who want to minimize downtime and carry out maintenance efficiently on-site. Advantages of the Maintenance & Repair Kit for Service Use The repair kit covers almost all typical wear and spare parts used in the operation of Testomat® and Titromat® analysis devices. From seals and O-rings to fuses, hoses, sight glasses, and cleaning accessories, everything is organized clearly in one kit. This allows for fast troubleshooting, reduces downtime, and ensures consistently high measurement accuracy and operational reliability. At the same time, the kit simplifies spare part storage and supports an economical maintenance strategy. Frequently asked questions Are there any differences between service sets for the Testomat 808 and the Testomat 808 SiO2? Yes, as they do not automatically have the same spare parts. More detailed lists can also be found in the respective operating instructions under ‘Spare parts lists’. What are service sets for? They are designed to enable regular maintenance and minor repairs to be carried out independently. Regular servicing can significantly increase the service life of your Testomat. What does the service set or maintenance kit contain? The exact contents of the service sets and maintenance kits can be seen in the pictures or in the item descriptions listed in the shop. Can individual components also be ordered? Yes, that is possible. Please send us the item numbers or the exact item description by email: vertrieb@heylneomeris.de Can I also order a service set or maintenance kit and have the service carried out by a service partner? Yes, this is possible. Please let us know the exact location of the Testomat device so that we can find the service partner for your region. HeylNeomeris has a Germany-wide service partner network as well as service partners in Austria.

"Professional" Maintenance Kit for Testomat® 2000 & ECO Professional Maintenance Set in a Case for Your Testomat Water Analysis Devices from Heyl The "Professional" maintenance kit contains a comprehensive selection of spare and wear parts specifically for the Testomat® 2000 and Testomat® ECO series. The kit is ideal for regular maintenance or repairs on your devices. What Does the Professional Maintenance Kit Include? 6x 011210 Plugs for Measuring Chamber 4x 011216 O-Ring 20x2 2x 011217 Inlet Filter 19.5dx25 2x 011218 Spring for Inlet 2x 011225 Complete Flow Regulator Core 4x 011249 O-Ring 10.82 x 1.78 2x 031582 Fuse G-, 5x20mm, M4A 2x 031584 Solder-in Fuse, TR5, T0.2A 2x 031585 Solder-in Fuse, TR5, T0.315A 2x 031592 Solder-in Fuse, TR5, T1.0A 2x 031595 Solder-in Fuse, TR5, T0.1A 2x 031596 Solder-in Fuse, TR5, T0.08A 2x 031622 Solder-in Fuse, TR5, T0.16A 1x 032287 Cleaning Brush Set 2x 033253 Screw M3x40, A2, DIN 965 2x 033775 O-Ring 4.47 x 1.78 2x 033776 O-Ring 18x2 EPDM 4x 033777 Flat Gasket 24x2 EPDM 70 2x 040011 Suction Hose, complete 2x 040016 Pressure Hose, complete 2x 040040 Valve Set 2x 040050 Magnetic Stirring Core 1x 040121 Inlet Connection 3x 040131 Screw Cap with T2000 Insert 2x 040141 Pipe, PE, D=6 d=4x105 2x 040142 Pipe, PE, D=6 d=4x115 1x 040153 Screw-in Connector G 1/4 -6 2x 040154 Plug-In Elbow Connector 6-6 1x 040157 Elbow Screw Connector 4x 040170 Sight Glass 30x3 2x 040240 Pipe, PE, D=10 d=8x98 Professional Maintenance Set for Testomat Water Analysis Devices from Heyl The "Professional" maintenance kit was specially developed for the Testomat® 2000 and Testomat® ECO series and provides a comprehensive selection of spare and wear parts for professional service use. It is ideal for regular maintenance, servicing, and repairs of water analysis devices in industrial and commercial applications. With its clearly organized contents, the kit allows service work to be carried out quickly on-site, reducing downtime, efficiently maintaining maintenance intervals, and ensuring long-term measurement accuracy and operational reliability. For service technicians, maintenance staff, and operators, the kit is a practical all-in-one solution for daily operations. Advantages of the "Professional" Maintenance Kit for Testomat® 2000 & ECO The "Professional" maintenance kit offers a complete, practical set of components for servicing Testomat® 2000 and Testomat® ECO devices. All included spare and wear parts are precisely tailored to the requirements of these device series, enabling quick, professional maintenance without additional spare part procurement. By providing key components such as seals, fuses, hoses, valves, and cleaning accessories in a single kit, downtime is significantly reduced. At the same time, the kit supports economical maintenance by enabling preventive service and avoiding unplanned repairs. Frequently asked questions Are there any differences between service sets for the Testomat 808 and the Testomat 808 SiO2? Yes, as they do not automatically have the same spare parts. More detailed lists can also be found in the respective operating instructions under ‘Spare parts lists’. What are service sets for? They are designed to enable regular maintenance and minor repairs to be carried out independently. Regular servicing can significantly increase the service life of your Testomat. What does the service set or maintenance kit contain? The exact contents of the service sets and maintenance kits can be seen in the pictures or in the item descriptions listed in the shop. Can individual components also be ordered? Yes, that is possible. Please send us the item numbers or the exact item description by email: vertrieb@heylneomeris.de Can I also order a service set or maintenance kit and have the service carried out by a service partner? Yes, this is possible. Please let us know the exact location of the Testomat device so that we can find the service partner for your region. HeylNeomeris has a Germany-wide service partner network as well as service partners in Austria.

Content: 1 x 40121 inlet connector1 x 40122 outlet connector,PVC1 x 11225 Flow regulator core (1-8 bar)2 x 11216 O-Ring 20x2 (NBR) 1 x 11217 filter strainer for feed 19,5dx251 x 33777 flat gasket 24x2 EPDM 601 x 40153 screw connector G1/4"-61 x 40129 controller plug T2000,cpl. Frequently Asked Questions What is the service kit used for? For maintenance and replacement of key parts in the regulator-filter assembly. Which parts are replaced with this kit? Connections, seals, filters and flow components. Why is it important to maintain this area? To ensure that the water flow remains stable and measurements are reliable. Which devices is the set suitable for? For Testomat® devices with the appropriate filter and regulator housing. Can I replace the parts myself? Yes, typical maintenance tasks can be carried out easily with this set. What are the benefits of replacing these parts during operation? Fewer faults and a consistent water flow. Does the set also include a filter? Yes, a filter screen for the inlet is included.

Content: 1 x #40011 suction hose, cpl.1 x #40016 pressure hose, cpl.1 x #40040 valve set for jet pump Frequently Asked Questions What is the service kit for? For maintenance and replacement of key parts of the DosiClip dosing pump. What parts are included in the kit? Suction hose, pressure hose and a valve set. Why should I service the dosing pump regularly? To ensure it operates reliably and the dosing remains accurate. Which devices is the set suitable for? For devices with a DosiClip dosing pump. Can I replace the parts myself? Yes, typical maintenance tasks can be carried out easily with this set. What are the benefits of replacing parts during operation? Consistent dosing and fewer faults. Is the set ready for immediate use? Yes, all essential parts for replacement are included.

Content: 2 x 40170 sight glass 30x33 x 33777 flat gasket 24x2 EPDM 602 x 33776 O-Ring 18x2 EPDM3 x 11210 Protection plug to measuring chamber T2000 / ECO / EVO TH / EVO TH CAL1 x 40050 Magnetic stirring core Frequently Asked Questions What do I need the service kit for? For maintenance and replacement of key parts relating to the measuring chamber. Which parts are replaced with this kit? Seals, viewing windows and other components of the measuring chamber. Why should I service the measuring chamber regularly? To ensure that measurements remain reliable and to prevent leaks. Which devices is the set suitable for? For Testomat® devices with the corresponding measuring chamber. Can I replace the parts myself? Yes, typical maintenance tasks can be carried out easily with it. What are the benefits of replacement in day-to-day use? Stable measurement values and fewer operational faults. Is a stirring component also included? Yes, a magnetic stirring core is included in the set.

This special service set is designed for the Testomat 2000® Polymer. Included are the standard spare parts for the Testomat 2000® together with spare parts for the PeriClip® pump, i.e. the pump head.   The service set includes the following spare parts: 1 T2000 gasket kit 2 30x3 sight glass 1 flow regulator cores 3 stoppers for m. chamber 2 x pump head 1 filter screen for intake 3 different pipes 1 cleaning brush set 2 x tube connection 2 x seal for tube connection 2 x screw cap with insert Frequently Asked Questions What is the service kit for? For maintenance and replacement of key parts on the Testomat 2000® Polymer. What makes this kit special? There is a dedicated service kit specifically for the Testomat 2000® Polymer, which, in addition to the contents of the standard service kit, also includes key spare parts for the PeriClip® pump, such as the pump head. What is included in the service set? Various spare parts for the measuring chamber, pump and water supply. Which device is the set suitable for? Specifically for the Testomat 2000® Polymer. Can I carry out maintenance myself with this? Yes, many typical service tasks can be performed with it. Why is the service kit useful in day-to-day use? You avoid downtime and have important parts immediately to hand. Does it also include cleaning accessories? Yes, a cleaning brush set is included in the kit.