emec K-Plus dosing pump

Product number: 896355

€528.36*

Please log in to receive your conditions.

Available in 14 days, delivery time 1-2 days


Product number: 896355
GTIN: 4260682387554
Our comment: A detailed explanation of the operating modes can be found in the operating instructions in the download area, where you will also find the product data sheet. You can easily access both documents via the link below the product text.
Offer as PDF  
Login for addressed offer
The entered number of pieces will be taken into account when creating the offer.
Product information "emec K-Plus dosing pump"
Solenoid-operated dosing pumps with horizontal mounting, cost-effective and particularly reliable. K pumps are designed for universal use and various industries.
The K series includes an MF version with multifunction software and an LPV version for viscous liquids. Also available with self-venting.

Features at a glance
  • With universal input for contact pulse or 0/4+20 mA
  • Stroke frequency proportional to input signal (0+180 imp/min) 
  • Universal input programmable as: 
- Pulse divider 1/10, 10/100, 100/1000
- pulse multiplier 1*10 
and then by means of rotary knob, infinitely adjustable 
  • Stroke length adjustment by means of rotary knob, stepless from 0...100% 
  • "LEVEL" connection for empty level switch 
  • "ALARM" relay output for empty signal (option)

Operating mode: 
  • Constant 
  • Proportional via pulse divider 

Inputs:
  • Level control (with pre-alarm)
  • Digital signal
  • Voltage signal

Output:
  • Level alarm output

Hydraulic parts:
- PVDF
- PP
- stainless steel (AISI 316)
- Acrylic glass (PMMA)
- Check valves with double ball
- O-rings made of FKM B, EPDM, nitrile, PTFE

Diaphragm:
PTFE diaphragm

Accessories (selectable via the configurator)
Suction lances:
  • emec Viton suction lance with 40cm immersion length (with BNC connection)
  • emec Viton suction lance with 122cm immersion length (with BNC connection)
  • emec EPDM suction lance with 40cm immersion length (with BNC connection)
  • emec EPDM suction lance with 122cm immersion length (with BNC connection)

Included in delivery:
  • Injection valve 1/2" - 4x6mm made of PVDF or PP, depending on the selected version
  • Axial foot valve with empty level switch and 2.5m connection cable with BNC plug
  • 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data) 
  • 2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data) 
  • 2m vent hose PVC transparent, 4x6mm
  • 2.5m control cable RG174 with BNC plug
  • Operating instructions
  • 6 plugs with screws
  • Fine-wire fuse 4x20mm

Mode/LED - each function
  • CONSTANT - continuous operation with 1÷180 metering strokes per minute
  • CONSTANT/DIV 1:10 - continuous operation with 1÷18 metering strokes per minute
  • DIV 1:10 - Pulses coming from the "INPUT" connector are divided by the factor N = 1÷10 (adjustable with DK 2, grey scale)
  • DIV 10:100 - Pulses coming from the "INPUT" connection are divided by a factor of 10÷100. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /10 to N10 = /100
  • DIV 100:1000 - Pulses coming from the "INPUT" connector are divided by a factor of 100÷1000. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /100 to N10 = /1000
  • MULT 1:10 - Pulses coming through the "INPUT" connector are multiplied by the factor N = 1÷10 (adjustable with DK 2, grey scale).
  • mA - An analogue signal (0/4÷20 mA) coming from the "INPUT" connection generates dosing strokes according to the factor N = 1÷10 (adjustable with DK 2, grey scale).

Dimensions

Length 17,5 cm, 20 cm
Width 32 cm

Weight

Weight 3,18 kg

Other attributes

Technical specifications
  DOSING PUMP TYPE
MODEL DOSING RATE HUBVOLUME DOSING HEAD HOSE VALVE
1801 1 l/h - 18 bar 0.1 LA 4 x 6 3/8"
1503 3 l/h - 15 bar 0.28 LA 4 x 6 3/8"
103,5 3,5 l/h - 10 bar 0.32 LA 4 x 6 3/8"
100,5 0,5 l/h - 10 bar 0.05 IA 4 x 6 3/8"
085,5 5,5 l/h - 8 bar 0.51 LA 4 x 6 3/8"
057,5 7,5 l/h - 5 bar 0.69 LA 4 x 6 3/8"
0213 13 l/h - 2 bar 1.2 MA 4 x 6 3/8"
HYDRAULIC COMPONENTS
  DOSING HEAD O-RINGS VALVES MEMBRANE HOSES VISCOSITY
CORPUS BULLETS pressure side suction side max. CPS
K PVDF Viton PVDF Ceramic PTFE PVDF PVC 100
P PVDF EPDM PVDF Ceramic PTFE PVDF PVC 100
Y PVDF Nitrile PVDF Ceramic PTFE PVDF PVC 100
V PP Viton PP Ceramic PTFE PE PVC 100
D PP EPDM PP Ceramic PTFE PE PVC 100
W PP Nitrile PP Ceramic PTFE PE PVC 100
J PVDF Viton+PTFE PVDF Ceramic PTFE PVDF PVC 100
S PVDF Silicone PVDF Ceramic PTFE PVDF PVC 100
A PMMA Viton Polypropylene Ceramic PTFE PE PVC 100
$ PMMA Viton Polypropylene SS PTFE N/A N/A 8000
Z SS 316* Viton SS SS PTFE N/A N/A 100
* SS 316 corresponds to stainless steel Mat. 1.4436
  POWER SUPPLY
00 230 VAC safety plug
0S 230 VAC plug Australia
01 230 VAC without plug
03 115 VAC plug US
04 24 VAC without plug
05 12 VDC**
07 24 VDC
** not suitable for all models

Recommended accessories

emec EPDM suction lance with 40cm immersion length (LASP4) - BNC plug for connection to K and VMS pumps
Product number: 896356
Connection cable version (unit side): BNC connector (for K- pumps and VMS pumps) | Sealing material: EPDM | Version: 40 cm immersion length
Suction lance for extracting a medium directly from a supply container (canister/IBC/CNT tank/barrel)Foot valve with pre-filter and non-return valve. The level switch generates a digital empty signal. Venting nipple 4mm for return of venting hose from dosing pump or overpressure/multifunction valve.Our suction lances can be adjusted in height, this means that, for example, instead of pumping from a 50 litre container, you can also pump from a 10, 20 or 30 litre container with the 40cm suction lance.Series: LASP4Material O-ring: EPDM (neutral) or FP (Viton)Immersion length: 40cm, 75cm or 122cmConnection on the unit side: M12 or BNCThread/hose connection (mm): 1/2 4x6 (suction capacity max 10l/h)Number of suction connections: 1-suction connectionMounting connection: C61 canister connection (for 40cm suction lance) or mounting connection 1 1/2" CNT/IBC (for 122cm suction lance)Number of floats/switching direction/electrical connection: 1st level/N.O/M12(PRIUS/PRISMA)Length of connection cable: 3.5mIntake filter: LASP4Special feature: Valve ball ceramic

€148.75*
emec Viton suction lance with 122cm immersion length (LASP4) - BNC plug for connection to K- and VMS pumps
Product number: 896359
Connection cable version (unit side): BNC connector (for K- pumps and VMS pumps) | Sealing material: Viton | Version: 122cm Immersion length
Suction lance for extracting a medium directly from a supply container (canister/IBC/CNT tank/barrel)Foot valve with pre-filter and non-return valve. The level switch generates a digital empty signal. Venting nipple 4mm for return of venting hose from dosing pump or overpressure/multifunction valve.Our suction lances can be adjusted in height, this means that, for example, instead of pumping from a 50 litre container, you can also pump from a 10, 20 or 30 litre container with the 40cm suction lance.Series: LASP4Material O-ring: EPDM (neutral) or FP (Viton)Immersion length: 40cm, 75cm or 122cmConnection on the unit side: M12 or BNCThread/hose connection (mm): 1/2 4x6 (suction capacity max 10l/h)Number of suction connections: 1-suction connectionMounting connection: C61 canister connection (for 40cm suction lance) or mounting connection 1 1/2" CNT/IBC (for 122cm suction lance)Number of floats/switching direction/electrical connection: 1st level/N.O/M12(PRIUS/PRISMA)Length of connection cable: 3.5mIntake filter: LASP4Special feature: Valve ball ceramic

€184.45*
emec K-Plus Service Set M - PP pump head, EPDM seal and PTFE diaphragm
Product number: 896346
Pump head and seal material: D = PP pump head with EPDM seal | Selection service set (pump head model / size): M
The emec service set for the K-Plus pump consists of the pump head, including sealing ring and a diaphragm, which is the same for all versions of the pump and is made of PTFE. Our service sets are available in the versions I, L and M. The only difference is the size of the pump head, which varies according to pressure and flow rate. The second choice on your part determines the material of the pump head and the material of the sealing ring. The correct selection of the service set, i.e. the correct choice of pump head size and pump head and seal material, can easily be made via your K-series pump type plate as follows. 1. On the type plate of your K-PLUS pump you will find the pressure "bar xxx - PSI xxx" above the serial number and then the pump capacity "l/h xxx - gph xxx". With these two items of information, you can easily determine the correct pump head size (I, L, M). (see example picture of type plate in the article) Version I 1 bar / 3 litres per hour 1 bar / 5 litres per hour 1 bar / 20 litres per hour Version L 5 bar / 10 litres per hour 8 bar / 8 litres per hour 10 bar / 5 litres per hour 15 bar / 4 litres per hour 18 bar / 2 litres per hour Version M 2 bar / 18 litres per hour 2. hidden in the "code" on the type plate you will find the reference to the pump head mounted at delivery and its sealing material. The ninth character indicates the sealing material. (see example picture of the type plate in the article) The most common types are listed below and these are shown via our selection matrix: K = PVDF pump head with Viton seal D = PP pump head with EPDM seal A = PMMA pumphead with Viton seal R = PMMA pumphead with EPDM seal Z = Stainless steel with Viton seal £ = Stainless steel pump head with EPDM gasket  (other types are available on request) Service set contents: PVDF pump head with Viton seal:1x pump head (dosing head) incl. seal 1x PTFE diaphragm- Stainless steel screws and caps (only for L and M service set) PP pump head with EPDM seal:1x pump head (dosing head) incl. seal  1x PTFE diaphragm - Stainless steel screws and caps (only for L and M service set)PMMA pump head with Viton or EPDM seal:1x pump head (dosing head) incl. seal 1x PTFE diaphragm - Stainless steel screws and caps (only for L and M service set) *Stainless steel pump head with Viton or EPDM seal:1x seal without pump head (no change required as stainless steel) 1x PTFE diaphragm

€113.05*
emec K-Plus Service Set M - PVDF pump head, Viton seal and PTFE diaphragm
Product number: 896345
Pump head and seal material: K = PVDF pump head with Viton seal | Selection service set (pump head model / size): M
The emec service set for the K-Plus pump consists of the pump head, including sealing ring and a diaphragm, which is the same for all versions of the pump and is made of PTFE. Our service sets are available in the versions I, L and M. The only difference is the size of the pump head, which varies according to pressure and flow rate. The second choice on your part determines the material of the pump head and the material of the sealing ring. The correct selection of the service set, i.e. the correct choice of pump head size and pump head and seal material, can easily be made via your K-series pump type plate as follows. 1. On the type plate of your K-PLUS pump you will find the pressure "bar xxx - PSI xxx" above the serial number and then the pump capacity "l/h xxx - gph xxx". With these two items of information, you can easily determine the correct pump head size (I, L, M). (see example picture of type plate in the article) Version I 1 bar / 3 litres per hour 1 bar / 5 litres per hour 1 bar / 20 litres per hour Version L 5 bar / 10 litres per hour 8 bar / 8 litres per hour 10 bar / 5 litres per hour 15 bar / 4 litres per hour 18 bar / 2 litres per hour Version M 2 bar / 18 litres per hour 2. hidden in the "code" on the type plate you will find the reference to the pump head mounted at delivery and its sealing material. The ninth character indicates the sealing material. (see example picture of the type plate in the article) The most common types are listed below and these are shown via our selection matrix: K = PVDF pump head with Viton seal D = PP pump head with EPDM seal A = PMMA pumphead with Viton seal R = PMMA pumphead with EPDM seal Z = Stainless steel with Viton seal £ = Stainless steel pump head with EPDM gasket  (other types are available on request) Service set contents: PVDF pump head with Viton seal:1x pump head (dosing head) incl. seal 1x PTFE diaphragm- Stainless steel screws and caps (only for L and M service set) PP pump head with EPDM seal:1x pump head (dosing head) incl. seal  1x PTFE diaphragm - Stainless steel screws and caps (only for L and M service set)PMMA pump head with Viton or EPDM seal:1x pump head (dosing head) incl. seal 1x PTFE diaphragm - Stainless steel screws and caps (only for L and M service set) *Stainless steel pump head with Viton or EPDM seal:1x seal without pump head (no change required as stainless steel) 1x PTFE diaphragm

€113.05*