The Testomat® EVO TH automatically determines the water hardness by means of titration. The device is suitable for controlling the water quality of water treatment plants, drinking water systems, industrial boilers and for monitoring process water. Approved for boiler houses | component identification no.: TÜV. WÜH. 21-025 | VdTÜV bulletin water monitoring device 100 and UL-TÜV certified.The Testomat® style="letter-spacing: 0px;"> EVO TH convinces with new functionalities:Optical water detection when filling the measuring chamberImport and export of settings (basic programming) with selectable file nameLogging of measurement data and messages / alarms using an integrated SD or optional SDHC card (2GByte)Firmware update via SD cardLCD graphic displayMultilingual menu with easy switching (internal programming is retained)Integrated self-test with continuous monitoringExternal clear / acknowledge inputFree programmable passwordAutomatic bleeding of the indicator lineDoors can be changed individuallyRange monitoring (fall below limit value1 / exceed limit value 2)Permitted number of lack of water, freely programmable (for systems with temporarily low water pressure)Performance profile:High-precision titration using a piston dosing pumpAnalogue output 0/4 - 20 mAProgrammable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l2 independent limits with adjustable switching functions as well as switching option in accordance with an adjustable number of negativeanalyzesAnalysis initiation:automatic interval operation (0-99 minutes)depending on quantity via contact water meterIndicator quantities: 100 und 500 ml bottles The Testomat® EVO TH is supplied without a power switch. This is done to comply with the DIN EN 61010-1 safety standard for measuring, control and laboratory equipment. Of course, an external mains switch will be made available to you as a customer for purchase. You can order this from us as a disconnector under article no. 850925, "external cam switch with protection class IP65". The Testomat® LAB TH and Testomat® LAB TH-R (Remote)determine the water hardness (residual total hardness) fully automatically by titration. The instrument is suitable for controlling the water quality of water treatment plants, drinking water plants, industrial boilers and for monitoring process water.Please note that Testomat® LAB - TH and Testomat® LAB TH-R was developed for use in multi-parameter systems or for connection to a higher-level control system.In addition to the 4-20 mA output for transmitting the measured values, this series has an RS232 interface for transmitting the measured values and error & status messages. Furthermore, all data are continuously recorded on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format structured and can be used at any time for detailed observations.The Testomat® LAB TH and TH-R convinces with new functionalities:Execution of parameterization by SD card or the "Service Monitor" software via mini-USB (on the device side) to USB 2.0 (for example PC/notebook)Multilingual menu navigation software in German, English, French, DutchFirmware update via SD cardcompact designoptimized water detection based on an optical measuring methodIntegrated self-test with continuous monitoringAutomatic venting of the indicator lineAdditional functions of the TH-R version:Parameterisation and readout of the unit parameters via the RS232 interfaceTried and tested performance profile:High-precision titration using a piston dosing pumpReliable and low-maintenance operationMinimal indicator and water consumptionAnalog output 4 - 20 mA for transmission of measured valuesProgrammable hardness unit in °dH, °f, ppm CaCO3, mmol/lCommon alarm outputIndicator quantities: 500 ml bottlesAnalysis triggering:Automatic interval operation (interval pause adjustable from 0-255 minutes)External analysis input (start/stop)Hand launchOptional accessories:OLED displayProtecting cover to increase the IP protection class

The Testomat® EVO TH automatically determines the water hardness by means of titration. The device is suitable for controlling the water quality of water treatment plants, drinking water systems, industrial boilers and for monitoring process water. Approved for boiler houses | component identification no.: TÜV. WÜH. 21-025 | VdTÜV bulletin water monitoring device 100 and UL-TÜV certified.The Testomat® style="letter-spacing: 0px;"> EVO TH convinces with new functionalities:Optical water detection when filling the measuring chamberImport and export of settings (basic programming) with selectable file nameLogging of measurement data and messages / alarms using an integrated SD or optional SDHC card (2GByte)Firmware update via SD cardLCD graphic displayMultilingual menu with easy switching (internal programming is retained)Integrated self-test with continuous monitoringExternal clear / acknowledge inputFree programmable passwordAutomatic bleeding of the indicator lineDoors can be changed individuallyRange monitoring (fall below limit value1 / exceed limit value 2)Permitted number of lack of water, freely programmable (for systems with temporarily low water pressure)Performance profile:High-precision titration using a piston dosing pumpAnalogue output 0/4 - 20 mAProgrammable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l2 independent limits with adjustable switching functions as well as switching option in accordance with an adjustable number of negativeanalyzesAnalysis initiation:automatic interval operation (0-99 minutes)depending on quantity via contact water meterIndicator quantities: 100 und 500 ml bottles The Testomat® EVO TH is supplied without a power switch. This is done to comply with the DIN EN 61010-1 safety standard for measuring, control and laboratory equipment. Of course, an external mains switch will be made available to you as a customer for purchase. You can order this from us as a disconnector under article no. 850925, "external cam switch with protection class IP65". High-precision titration using a piston dosing pumpAnalogue output 0/4 - 20 mAProgrammable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l2 independent limits with adjustable switching functions as well as switching option in accordance with an adjustable number of negativeanalyzesAnalysis initiation:automatic interval operation (0-99 minutes)depending on quantity via contact water meterIndicator quantities: 100 und 500 ml bottles The Testomat® EVO TH is supplied without a power switch. This is done to comply with the DIN EN 61010-1 safety standard for measuring, control and laboratory equipment. Of course, an external mains switch will be made available to you as a customer for purchase. You can order this from us as a disconnector under article no. 850925, "external cam switch with protection class IP65". The Testomat® LAB CL is a robust, wet chemical online measuring converter to measure the concentration of total chlorine or free chlorine in the measuring range 0 - 5 mg/l. The instrument is suitable for controlling the water quality of water treatment plants, drinking water plants, process water monitoring and for monitoring the chlorine concentration in the cooling tower process.Instrument operation is based on the DPD method according to EN ISO 7393-2. The analysis is carried out through the addition of two reagents and the measurement result is obtained after a reaction time of approx. 60 seconds (pure measurement time without flush time).Please note that Testomat® LAB - CL was developed for use in multi-parameter concepts or for integration into an existing higher-level controlconcept.In addition to the 4-20 mA output for the transmission of the measured values, this series has an RS232 interface for the transmission of the measured values and error & status messages. Furthermore, all data are continuously recorded on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format in a structured way and can be used for detailed observations at any time.The Testomat® LAB CL convinces with new functionalities:Execution of parameterization by SD card or the "Service Monitor" software via mini-USB (on the device side) to USB 2.0 (for example PC/notebook)Multilingual menu navigation software in German, English, French, DutchFirmware update via SD cardcompact designoptimized water detection based on an optical measuring methodoptimized reagent set for total chlorine measurement (reduction from three to tow reagents for total chlorine)Integrated self-test with continuous monitoringAutomatic venting of the indicator line Tried and tested performance profile: High-precision peristaltic pumpsReliable and low-maintenance operationMinimal reagent and water consumptionAnalog output 4 - 20 mA for transmission of measured valuesRS232 interface for transmission of measured values & fault messagesCommon alarm outputOptimised reagents: Only 2 reagents for the determination of total chlorineOptimised reagent bottles: Filling quantities adjusted so that both bottles are used up at the same timeAnalysis triggering:Automatic interval operation (interval pause adjustable from 10-60 minutes)Measuring phase mode (start impulse triggers a sequence of analyses for a period of 10 minutes to 12 hours)External analysis input (start/stop)Hand start

The NEOMERIS Softwater RS monitors the water hardness and signals a hardness breakthrough via alarm. The device is suitable for monitoring reverse osmosis plants, boiler feed water supply, ultrapure water plants or in the environment of soft water production for commercial and industrial purposes. The sensor is reactivated by means of brine, which is introduced via a multi-way valve with injector integrated in the device.Notice: A flow controller must be ordered additionally. Size depends on pipe dimensions for connection.[#dspacer#][#dspacer#]Accessories:Flow regulator DN 15, 1/2"Flow regulator DN 25, 1"flow regulator DN 40,1 1/2"Flow regulator DN 50, 2Flow regulator DN 65,2 1/2"Flow regulator DN 80, 3"Exchange sensor

with  / without SK910 4-20 mA

The Testomat 2000 THCL® process photometer determines the total chlorine content according to the colorimetric analysis principle in the range from 0 to 2.5 mg / l (ppm) and the water hardness by titration.Performance profile: Two independently programmable limit value contacts for monitoring and con trolling tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min)External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functions Monitoring of two measuring points (Switching by external solenoid valves) Internal error documentation programmable service address Indicator quantities: 100 and 500 ml bottles Programmable maintenance interval for maintenance request

The process photometer Testomat 2000® automatically determines water hardness, carbonate hardness, the p-value or the minus m-value via titration. It is ideal for monitoring the water quality of water treatment, water blending and drinking-water plants. Monitoring and quality control of softening plants with and without blending (Testomat 2000®  reagent TH 2005–2250)Monitoring and quality control of decarbonisation plants (Testomat 2000® reagent TC 2050–2100) Measuring acidic values in decarbonisation and desalination plants (Testomat 2000® reagent TM 2005) Monitoring of steam boilers (Testomat 2000® reagent TP 2100).Performance profile: Menu-driven operation and programming via plain text display Determinal measuring ranges of residual hardness, total hardness, carbonate hardness, minus m value, p value by indicator selectionSelection of hardness units in ° dH, ° f, ppm CaCO3 or mmol / l High-precision titration using a piston dosing pump Analysis initiation: - Automatic interval operation (Interval pause adjustable from 0–99 min) - External control - Dynamic (fatigue-dependent interval operation) - Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Internal error documentation Programmable service address Indicator quantities: 100 and 500 ml bottles Programmable maintenance interval for maintenance request

The Testomat 2000® Antox is a special version of the Testomat 2000® with an additional pump for dosing a reducing agent. By adding this reducing agent in the already filled measuring chamber, the disturbance of oxidizing agents is eliminated. The further analysis of the water hardness measurement is then continued according to the standard.Performance profile: Menu-driven operation and programming via plain text display Determinal measuring ranges of residual hardness, total hardness, carbonate hardness, minus m - value, p - value by indicator selectionSelection of hardness units in ° dH, ° f, ppm CaCO3 or mmol / l High-precision titration using a piston dosing pump [#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min)External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes)and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Internal error documentation Programmable service address Indicator quantities: 100 and 500 ml bottles Programmable maintenance interval for maintenance request

The process photometer Testomat 2000® Br2 is an analytical instrument for online monitoring of the content of bromine (Br2) in the measuring range of 0 - 5.6 mg / l (ppm).Performance profile: Analysis via automatic dosing of two reagents The analysis result is displayed after a reaction time of approx. 1 min. (Measuring time without rinsing time)2 independently programmable limit contacts for monitoring and control tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump [#dspacer#][#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min) External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat 2000® CAL with additional calibration function automatically determines water hardness, carbonate hardness, the p-value or the minus m-value via titration. It is ideal for monitoring the water quality of water treatment, water blending and drinkingwater plants, monitoring and quality control of softening plants with and without blending (Testomat 2000® reagent TH 2005–2250), monitoring and quality control of decarbonisation plants (Testomat 2000® reagent TC 2050–2100), measuring acidic values in decarbonisation and desalination plants (Testomat 2000® reagent TM 2005) and monitoring of steam boilers (Testomat 2000® reagent TP 2100)Performance profile: Menu-driven operation and programming via plain text display Determinal measuring ranges of residual hardness, total hardness, carbonate hardness, minus m-value, p-value by indicator selectionSelection of hardness units in ° dH, ° f, ppm CaCO3 or mmol / l High-precision titration using a piston dosing pump Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min)External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Internal error documentation Programmable service address Indicator quantities: 100 and 500 ml bottles Programmable maintenance interval for maintenance request

The Testomat 2000® CLF process photometer is an online analyzer for monitoring the ontent of free chlorine (CLF) in the range of 0-2.5 mg / L (ppm).Performance profile: Analysis via automatic dosing of two reagents The analysis result is displayed after a reaction time of approx. 1 min. (Measuring time without rinsing time)2 independently programmable limit contacts for monitoring and control tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump [#dspacer#][#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min) External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat 2000® ClO2 process photometer is an online analyzer for monitoring the content of chlorine dioxide (ClO2) in the range of 0–4,7 mg/l (ppm)Performance profile: Analysis via automatic dosing of two reagents The analysis result is displayed after a reaction time of approx. 1 min. (Measuring time without rinsing time)2 independently programmable limit contacts for monitoring and control tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump [#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min)External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat 2000® CLT process photometer is an online analyzer for monitoring the content of total chlorine (CLT) in the range of 0-2.5 mg / L (ppm); switchable to free chlorine in the same range.Performance profile: Analysis via automatic dosing of three reagents The analysis result is displayed after a reaction time of approx. 1 min. (Measuring time without rinsing time)2 independently programmable limit contacts for monitoring and control tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump [#dspacer#][#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min) External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat 2000® CLT Self Clean process photometer with additional cleaning function for the measuring chamber is an online analyzer for monitoring the total chlorine content (CLT) in the range of 0-2.5 mg / l (ppm). Switchable to free chlorine in the same range.Performance profile: Analysis via automatic dosing of three reagents The analysis result is displayed after a reaction time of approx. 1 min. (Measuring time without rinsing time)2 independently programmable limit contacts for monitoring and control tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump [#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min)External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The process photometer Testomat 2000® CrVI (High measuring range) is an online analytical measuring instrument for monitoring the content of chromate (CrO42-) in the range of 0 to 11.15 mg/l or chromium VI (CrVI) in the range of 0 to 5.0 mg/l. The device works with a photometric analysis principle based on DIN 38405. The analysis is carried out by adding two reagents and after a reaction time of approx. 2 minutes (pure measuring time without rinsing times) the analysis result is displayed. Areas of application are, for example, the control and monitoring of waste water treatment plants in electroplating. Two independently programmable limit value contacts are available for a wide variety of monitoring and control tasks. The analysis result can be recorded using the optional recorder card (current interface SK910) with a point or line recorder or an SD card data logger Testomat 2000® (0/4-20 mA). Performance profil: Simple, menu-guided operation and programming by means of plain text display. High measuring accuracy due to precise piston metering pump Analysis triggering: Automatic interval operation (interval pause adjustable from 0-99 minutes). External control Dynamic (exhaustion-dependent interval operation) Volume-dependent via contact water meter Two independent limit values with hysteresis (1, 2 or 3 bad analyses) and adjustable switching functions Monitoring of two measuring points (switching by external solenoid valves) Internal error documentation Programmable service addressProgrammable service interval for maintenance request

The process photometer Testomat 2000® CrVI (Standard) is an online analytical measuring instrument for monitoring the content of chromate (CrO42-) in the range of 0 to 2.0 mg/l or chromium VI (CrVI) in the range of 0 to 1.0 mg/l. The device works with a photometric analysis principle based on DIN 38405. The analysis is carried out by adding two reagents and after a reaction time of approx. 2 minutes (pure measuring time without rinsing times) the analysis result is displayed. Areas of application are, for example, the control and monitoring of waste water treatment plants in electroplating. Two independently programmable limit value contacts are available for a wide variety of monitoring and control tasks. The analysis result can be recorded using the optional recorder card (current interface SK910) with a point or line recorder or an SD card data logger Testomat 2000® (0/4-20 mA). Performance profil: Simple, menu-guided operation and programming by means of plain text display. High measuring accuracy due to precise piston metering pump Analysis triggering: Automatic interval operation (interval pause adjustable from 0-99 minutes). External control Dynamic (exhaustion-dependent interval operation) Volume-dependent via contact water meter Two independent limit values with hysteresis (1, 2 or 3 bad analyses) and adjustable switching functions Monitoring of two measuring points (switching by external solenoid valves) Internal error documentation Programmable service addressProgrammable service interval for maintenance request

The Testomat 2000® DUO is suitable for monitoring water hardness, carbonate hardness, p-value or minus m-value of water treatment, water blending and drinking water systems.Performance profile: Monitoring of 2 measuring points with different indicator types, eg. water hardness with different measuring ranges or water and carbonate hardness The measuring point switchover is automatic existing port for limitation to a single measuring point Menu-driven operation and programming via plain text display Determinal measuring ranges of residual hardness, total hardness, carbonate hardness, minus m - value, p - value by indicator selectionSelection of hardness units in ° dH, ° f, ppm CaCO3 or mmol / l High-precision titration using a piston dosing pump [#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min) External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes)and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Internal error documentation Programmable service address Indicator quantities: 100 and 500 ml bottles Programmable maintenance interval for maintenance request Please note that you need a Viton DosiClip in your device to measure carbonate hardness. It is therefore essential that you inform us of this when ordering a DUO device.

The Testomat 2000® Fe process photometer is an online analyzer for monitoring the dissolved iron (II) + (III) content in the range of 0 to 1.0 mg / l (ppm) using the photometric analysis principle.Performance profile: Analysis via automatic dosing of two reagents The analysis result is displayed after a reaction time of approx. 7 min. (Measuring time without rinsing time)2 independently programmable limit contacts for monitoring and control tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump[#dspacer#][#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min) External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat 2000® PO4 process photometer is an online analyzer for monitoring the content of ortho – phosphate in the range 0 to 10.0 mg/l (ppm) by using the photometric analysis principle.Performance profile: Analysis via automatic dosing of two reagents The analysis result is displayed after a reaction time of approx. 10 min. (Measuring time without rinsing time)Menu-driven operation and programming via plain text display Selection of unit in ppm or mg/l High-precision titration using a piston dosing pump[#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–255 min)External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat 2000® Polymer process photometer is an online analyzer for monitoring the content of polyacrylate in the range fo 0 to 50 mg/l (ppm) (with a set product specific factor of 1.00) using the photometric analysis principle.Performance profile: Analysis via automatic dosing of two reagents The analysis result is displayed after a reaction time of approx. 7 min. (Measuring time without rinsing time)Menu-driven operation and programming via plain text display Selection of unit in ppm or mg/l High-precision titration using a piston dosing pump [#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–255 min)External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat 2000® Self clean is a special version of the Testomat 2000® with an additional dosing pump for dosing a a cleaning solution after analysis. It can be used to remove pollution of the measuring chamber and the drain hose. After the set number of analyzes, the measuring chamber is rinsed and then the Testomat 2000® Self clean cleaning solution is added to the water in the measuring chamber. After 30 seconds reaction time, the measuring chamber content is drained. Then the measuring chamber is rinsed twice.Performance profile:Menu-driven operation and programming via plain text display Determinal measuring ranges of residual hardness, total hardness, carbonate hardness, minus m - value, p - value by indicator selectionSelection of hardness units in ° dH, ° f, ppm CaCO3 or mmol / l High-precision titration using a piston dosing pump [#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min) External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Internal error documentation Programmable service address Indicator quantities: 100 and 500 ml bottles Programmable maintenance interval for maintenance request

The process photometer Testomat 2000® SO3  is an online analyzer for monitoring the content of sulfite SO3 2- in the range of 0 to 50 mg/l by using the photometric analysis principle.Performance profile: Analysis via automatic dosing of two reagents The analysis result is displayed after a reaction time of approx. 3 min. (Measuring time without rinsing time)2 independently programmable limit contacts for monitoring and control tasks Menu-driven operation and programming via plain text display High-precision titration using a piston dosing pump [#dspacer#][#dspacer#][#dspacer#]Analysis initiation: Automatic interval operation (Interval pause adjustable from 0–99 min) External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Programmable service address Internal error documentation Programmable maintenance interval for maintenance request

The Testomat ECO® automatically determines the water hardness by means of titration. The device is ideal for monitoring and controlling the water quality of water treatment plants and drinking water systems.Performance profile: 2-line LC display for text display and self-explanatory, menu-driven user interface Programmable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l High-precision titration using a piston dosing pump Reliable and low-maintenance operation ieb [#dspacer#]Minimal indicator and water consumption 2 adjustable limits with programmable switching functions Monitoring of the analysis process and error message at dys-function Analysis initiation: - automatic interval operation (0-99 minutes) - quantity dependent (contact water meter) external analysis suppression "STOP" Indicator quantities: 100 and 500 ml bottles Analog output 0/4 - 20 mA for recorder connection

The Testomat ECO® C determines the carbonate hardness fully automatically by means of titration. In addition to monitoring and controlling the water quality of water treatment plants, the device is particularly suitable for determining the acid quality in swimming pool water at low measuring ranges. In combination with a hardening system, the instrument guarantees stable compliance with the parameters recommended in DIN 19643 of 0.7< KS4.3 < 2.0 mmol/l. Performance profil: 2-line LC display for text indication and self-explanatory, menu-guided user interfacefläche.Programmable hardness unit in °dH, °f, ppm CaCO3, mmol/lHigh-precision titration by means of piston metering pumpReliable and low-maintenance operationMinimal indicator and water consumption2 adjustable limit values with programmable switching functionsAnalysis initiation:automatic interval operation (0-99 minutes)quantity-dependent (contact water meter)Monitoring of analysis progress and error message in case of malfunctionsexternal analysis suppression "STOP"Two independent limits with hysteresis (1, 2 or 3 bad analyzes) and adjustable switching functions (2 neutral changer contacts)Analog output 0/4 - 20 mA for recorder connection

The Testomat ECO® Plus automatically determines the residual and total hardness by means of titration. This device is suitable for controlling the water quality of water treatment, water cutting and drinking water systems.Performance profile: Menu-driven operation and programming via plain text display Determinable ranges of residual hardness, total hardness by indicator selection Selection of hardness units in ° dH, ° f, ppm CaCO3 or mmol / l l High-precision titration using a piston dosing pump Analysis initiation: automatic interval operation (0-99 minutes) quantity dependent (contact water meter) Automatic interval operation External control Dynamic (fatigue-dependent interval operation) Quantity dependent via contact water meter Two independent limits with hysteresis (1, 2 or 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Internal error documentation Programmable service address Indicator quantities: 100 und 500 ml bottles Programmable maintenance interval for maintenance reques