Special indicator in powder form for the rapid colorimetric determination of
minimum hardness traces in the range 0-0.1 °dH, 0-1.8 ppm CaCO3
or 0-0.2 °f (French hardness).
Complete with measuring tube and spoon.
Analyses: approx. 700
Measuring time: approx. ½ minute
500 ml-bottle original Testomat® Indicator TP 2010 for limit value 0,1-1,5 mmol/l for measuring residual hardness in water
mmol/l (resolution):
0,1-1,5 (0,10)
Find everything you need for the water analysis in the boiler house in this Heyl analysis set:
We offer individual versions, if you want a different composition.
Content of Analysis Case Boiler House:
- Titration kits:
1 Duroval® A, 1 Duroval® B, 1 Duroval® CPM
- Colour comparison kits Testoval®:
- 1 sulphite,
- 1 Phosphatest®
- 1 electronic pH meter pHep + (pH value: 0.0-14.0, resolution of 0.1)
- 1 buffer solution pH 7.01 (pouch), 1 Buffer solution pH 10.01 (pouch)
- 1 conductivity meter DiST 4
(Range: 0-19.99 mS/cm, resolution: 0.01 mS/cm)
- 1 conductivity solution 5000 uS/cm
Spezialharz zum Schutz gegen Stillstandsverkeimung in Enthärtungsanlagenwirkt gegen Wiederverkeimung des Austauscherharzes bei geringem Durchfluss und bei Stillstand
keine Beeinträchtigung der Desinfektionswirkung durch Rückspülen und Besalzen bei der Regeneration des Filters, daher lange wirksam
auch in bestehenden Anlagen nachträglich einsetzbar [#dspacer#][#dspacer#][#dspacer#]keine Beeinträchtigung von Geruch und Geschmack des Wassers
kostspielige Dosiervorrichtungen zur Desinfektion der Filtermasse überflüssig
kein vorzeitiges Regenerieren der Enthärtungsanlage mit Kochsalz zur Desinfektion nötig, daher umweltfreundlich und wirtschaftlich
wartungsfrei
Spezialharz zum Schutz gegen Stillstandsverkeimung in Enthärtungsanlagenwirkt gegen Wiederverkeimung des Austauscherharzes bei geringem Durchfluss und bei Stillstand
keine Beeinträchtigung der Desinfektionswirkung durch Rückspülen und Besalzen bei der Regeneration des Filters, daher lange wirksam
auch in bestehenden Anlagen nachträglich einsetzbar [#dspacer#][#dspacer#][#dspacer#]keine Beeinträchtigung von Geruch und Geschmack des Wassers
kostspielige Dosiervorrichtungen zur Desinfektion der Filtermasse überflüssig
kein vorzeitiges Regenerieren der Enthärtungsanlage mit Kochsalz zur Desinfektion nötig, daher umweltfreundlich und wirtschaftlich
wartungsfrei
Spezialharz zum Schutz gegen Stillstandsverkeimung in Enthärtungsanlagenwirkt gegen Wiederverkeimung des Austauscherharzes bei geringem Durchfluss und bei Stillstand
keine Beeinträchtigung der Desinfektionswirkung durch Rückspülen und Besalzen bei der Regeneration des Filters, daher lange wirksam
auch in bestehenden Anlagen nachträglich einsetzbar [#dspacer#][#dspacer#][#dspacer#]keine Beeinträchtigung von Geruch und Geschmack des Wassers
kostspielige Dosiervorrichtungen zur Desinfektion der Filtermasse überflüssig
kein vorzeitiges Regenerieren der Enthärtungsanlage mit Kochsalz zur Desinfektion nötig, daher umweltfreundlich und wirtschaftlich
wartungsfrei
Size of bottle:
250 ml
|
pH buffer:
pH 9.21 (±0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 250 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.blue colored
Size of bottle:
500 ml
|
pH buffer:
pH 10.01 (±0,02pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 500 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.
Size of bottle:
250 ml
|
pH buffer:
pH 4.01 (±0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 250 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.red colored
Size of bottle:
500 ml
|
pH buffer:
pH 9.21 (±0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 500 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.
Size of bottle:
250 ml
|
pH buffer:
pH 7.00 (±0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 250 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.green colored
Size of bottle:
500 ml
|
pH buffer:
pH 7.00 (±0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 500 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.
Size of bottle:
500 ml
|
pH buffer:
pH 4.01 (±0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 500 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.
Size of bottle:
250 ml
|
pH buffer:
pH 10.01 (±0,02pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes Our 250 ml bottle is characterized by a special hygienic closure, which protects the pH buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.yellow colored
ORP Buffer:
475 mV (±5mV @25°C)
|
Size of bottle:
500 ml
High quality ORP buffer solution for calibration of your ORP electrodes
Our 500 ml bottle is characterized by a special hygienic closure, which protects the ORP buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.
ORP Buffer:
200 mV (±5mV @25°C)
|
Size of bottle:
500 ml
High quality ORP buffer solution for calibration of your ORP electrodes
Our 500 ml bottle is characterized by a special hygienic closure, which protects the ORP buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.
ORP Buffer:
650 mV (±5mV @25°C)
|
Size of bottle:
250 ml
High quality ORP buffer solution for calibration of your ORP electrodes
Our 250 ml bottle is characterized by a special hygienic closure, which protects the ORP buffer solution from contamination. To provide the required buffer, simply squeeze the bottle together and enough buffer solution is delivered to the upper part of the bottle to perform a calibration.