JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-009/000 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: 4 ... 20 mA / 0 ... 10 V combi output config. Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-009/994 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: 4 ... 20 mA / 0 ... 10 V combi output config. Extra code: with integrated display Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-530/000 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: RS-485 Modbus Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-535/994 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: SPE with PoDL (modbus TCP slave) Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/11-0-15-530/994 Basic type extension: RH-T Version: Standard Measuring range: 0 ... 100 % rH / -40 ... +80°C Output: RS-485 Modbus Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-009/000 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: 4 bis 20 mA / 0 bis 10 V combi output configurable Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-009/994 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: 4 ... 20 mA / 0 ... 10 V combi output config. Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-530/000 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: RS-485 Modbus Extra code: without Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S20 - Humidity and temperature transmitter with optional wall-mounted CO2 module Typ: 907042/12-0-17-530/994 Basic type extension: RH-T-CO2 Version: Standard Measuring range: 0 ... 95 % rH / -10 ... +60°C / 10.000 ppm Output: RS-485 Modbus Extra code: Integrated display Measuring parameters: Temperature, relative humidity, carbon dioxide (CO2) optional Interfaces: USB, RS485, Sigle Pair Ethernet (SPE) Robustness Easy to install Multi-sensor Optional plastic sintered filter The humidity and temperature transducer monitors the quality of the ambient air and can be wall-mounted both indoors and in protected outdoor areas. Areas of application Climate monitoring Ventilation systems Building management Storage rooms 

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct version Typ: 907043/11 Basic type extension: RH-T Version: StandardMeasuring range: 0 to 100 % RH/-40 to +80 °COutput: 4 to 20 mA/0 to 10 V combined output configuredExtra code: Without Measuring parametersTemperatureRelative humidityCarbon dioxide (CO2) optional InterfacesUSB PORTRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct versionTyp: 907043/11 Basic type extension: RH-T Version: StandardMeasuring range: 0 to 100 % RH/-40 to +80 °COutput: RS485 ModbusExtra code: Without Measuring parametersTemperatureRelative humidityInterfacesRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct version Typ: 907043/12 Basic type extension: RH-T Version: StandardMeasuring range: 0 to 95 % RH/-10 to +60 °COutput: 4 to 20 mA/0 to 10 V combined output configuredExtra code: Without Measuring parametersTemperatureRelative humidityCarbon dioxide (CO2) optional InterfacesUSB PORTRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

JUMO hydro TRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct versionTyp: 907043/12 Basic type extension: RH-T-CO2Version: StandardMeasuring range: 0 to 95 % RH/-10 to +60 °COutput: RS-485 ModbusExtra code: Without Measuring parametersTemperatureRelative humidityCarbon dioxide (CO2) optional InterfacesUSB PORTRS485 Areas of applicationClimate monitoringVentilation systemsBuilding managementStorage roomsRailroad applications according to DIN EN 50155 Special featuresRobustnessEasy to installMultisensorOptional plastic sintered filter The humidity and temperature transducer monitors the outside air flowing into buildings and production processes. It is suitable for installation in weather-protected ventilation ducts.

Push-in resistance thermometer in water vapour-tight designType: 902830/10-370-1011-2-6-100-11-2500/317 Measuring range -50 to +150°C Connection cable: PTFE 1x Pt 100 in four-wire circuit  Single resistance thermometer Tolerance class A according to DIN EN 60 751 Thermowell diameter: 6 mm Insertion length: 100 mm Connection cable end: Wire end ferrules to DIN 46 228 Connection cable length: 2500 mm (standard) Extra codes: Shielded connecting cableThe plug-in resistance thermometer in water vapour-tight design is preferably used for temperature measurements in sterilisers. Their specific design allows them to be used in atmospheres containing water vapour and under pressure. Another area of application is in apparatus engineering and laboratory technology. The thermometer can be supplied with a PTFE connection cable, which enables operation in humid rooms in the temperature range from -50 to +150 °C, or alternatively an FEP connection cable is available, which covers temperatures from -70 to +200 °C.The transition of the connection cable is strain-relieved to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class A in a two-wire circuit. In addition, the connection can optionally be made in three- and four-wire circuits to meet individual requirements.

Push-in resistance thermometer in water vapour-tight designType: 902830/10-370-2001-2-6-100-11-2500/000  Measuring range -50 to +150°C Connection cable: PTFE 2x Pt 100 in Three-wire circuit  Single resistance thermometer Tolerance class A according to DIN EN 60 751 Thermowell diameter: 6 mm Insertion length: 100 mm Connection cable end: Wire end ferrules to DIN 46 228 Connection cable length: 2500 mm (standard) Extra codes: Shielded connecting cableThe plug-in resistance thermometer in water vapour-tight design is preferably used for temperature measurements in sterilisers. Their specific design allows them to be used in atmospheres containing water vapour and under pressure. Another area of application is in apparatus engineering and laboratory technology. The thermometer can be supplied with a PTFE connection cable, which enables operation in humid rooms in the temperature range from -50 to +150 °C, or alternatively an FEP connection cable is available, which covers temperatures from -70 to +200 °C.The transition of the connection cable is strain-relieved to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class A in a two-wire circuit. In addition, the connection can optionally be made in three- and four-wire circuits to meet individual requirements.

Push-in resistance thermometer in water vapour-tight design, pressure-tight up to 5.0 barType: 902830/30-302-1011-2-4-50-11-2500/000  Measuring range -70 to +200°C Connection cable: FEP 1 x Pt 100 in four-wire circuit  Single resistance thermometer Tolerance class A according to DIN EN 60 751 Thermowell diameter: 4 mm Insertion length: 50 mm Connection cable end: Wire end ferrules to DIN 46 228 Connection cable length: 2500 mm (standard) Extra codes: without extra codeThe insertion resistance thermometer in water vapour-tight design is preferably used for temperature measurements in sterilisers. Their specific design allows them to be used in atmospheres containing water vapour and under pressure. Another area of application is in apparatus engineering and laboratory technology. The thermometer can be supplied with a PTFE connection cable, which enables operation in humid rooms in the temperature range from -50 to +150 °C, or alternatively an FEP connection cable is available, which covers temperatures from -70 to +200 °C.The transition of the connection cable is strain-relieved to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class A in a two-wire circuit. In addition, the connection can optionally be made in three- and four-wire circuits to meet individual requirements.

Push-in resistance thermometer in water vapour-tight design, pressure-tight up to 5.0 barType: 902830/30-302-2011-2-4,5-50-11-2500/000  Measuring range -70 to +200°C Connection cable: FEP 2 x Pt 100 in four-wire circuit  Single resistance thermometer Tolerance class A according to DIN EN 60 751 Thermowell diameter: 4.5mm with 2 measuring circuits in four-wire circuit Installation length: 50 mm Connection cable end: Wire end ferrules according to DIN 46 228 Connection cable length: 2500 mm (standard) Extra codes: without extra codeThe plug-in resistance thermometer in water vapour-tight design is preferably used for temperature measurements in sterilisers. The specific design makes it suitable for use in atmospheres containing water vapour and under pressure. Another area of application is in apparatus engineering and laboratory technology. The thermometer can be supplied with a PTFE connection cable, which enables operation in humid rooms in the temperature range from -50 to +150 °C, or alternatively an FEP connection cable is available, which covers temperatures from -70 to +200 °C.The transition of the connection cable is strain-relieved to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class A in a two-wire circuit. In addition, the connection can optionally be made in three- and four-wire circuits to meet individual requirements.

Type: 902150/40-397-1003-1-6-60-11-2500/317  Temperature measuring range: -50 ... +350 °C / Metal mesh  Measuring insert: 1x Pt 100 in two-wire circuit  Installation length: 60 mm  Cable length: 2500 mm  Tolerance class: Class B (standard)  Thermowell diameter: 6 mm  Wire end ferrules  Extra code: Shielded connecting cable  Available as single and dual resistance thermometers  Available in straight and angled versions to meet different installation requirements.  Flexible connection cables  Strain relief to protect against mechanical stress  Meets SIL and PL qualification standards for maximum safety  Optional kink protection Areas of application:  Laboratory technology  Climate cabinets  Solar systems  Heating, air conditioning, ventilation  Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments.This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.

Push-in resistance thermometer with spiralised connection cable, one-piece stainless steel protection tube Type: 902150/30-388-1003-1-6-100-11-2500/315,317 Temperature measuring range: -50 ... +260 °C / metal braiding Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 100 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: with bend protection, cable shielded Available as single and double resistance thermometers Available in straight and angled versions to meet different installation requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: Areas of application: Laboratory technology Climate cabinets Solar systems Heating, air conditioning, ventilation Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring. 

Push-in resistance thermometer with spiralised connection cable, one-piece stainless steel protection tube Type: 902150/30-388-1001-1-6-100-11-2500/315,317 Temperature measuring range: -50 ... +260 °C / metal mesh Measuring insert: 1x Pt 100 in three-wire circuit Installation length: 100 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: with bend protection, cable shielded Available as single and double resistance thermometers Available in straight and angled versions to meet different installation requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: Areas of application: Laboratory technology Climate cabinets Solar systems Heating, air conditioning, ventilation Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring. 

Push-in resistance thermometer with spiralised connection cable, one-piece stainless steel protection tube Type: 902150/30-402-1001-1-6-150-11-2500/315,317 Temperature measuring range: -50 ... +400 °C / Metal mesh Measuring insert: 1x Pt 100 in three-wire circuit Installation length: 150 mm Cable length: 2500 mm Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: with bend protection, cable shielded Available as single and double resistance thermometers Available in straight and angled versions to meet different installation requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: Areas of application: Laboratory technology Climate cabinets Solar systems Heating, air conditioning, ventilation Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring. 

Push-in resistance thermometer with spiralised connection cable, one-piece stainless steel protection tube Type: 902150/20-730-1003-1-6-50-11-1100/000 Temperature measuring range: -5 ... +105 °C Measuring insert: 1x Pt 100 in two-wire circuit Installation length: 50 mm Cable length: 1100 mm (stretched) Tolerance class: Class B (standard) Thermowell diameter: 6 mm Wire end ferrules Extra code: without Available as single and dual resistance thermometers Available in straight and angled versions to meet different mounting requirements. Flexible connection cables Strain relief to protect against mechanical stress Meets SIL and PL qualification standards for maximum safety Optional kink protection Areas of application: Laboratory technology Climate cabinets Solar systems Heating, air conditioning, ventilation Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring. 

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-459-405-502-20-601-23/000  Input: 0 to 10 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Quickon  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter.  JUMO MIDAS – Intelligent Transmitters for Precise Analytical Data The JUMO MIDAS is a versatile transmitter and controller specifically designed for the precise evaluation of analytical sensors. It supports various measurement parameters such as pH, redox, conductivity, oxygen, and temperature, and offers flexible interfaces for integration into automation and process control systems. In the HeylNeomeris range, the MIDAS impresses with its compact design, intuitive operation, and extensive configuration options – ideal for demanding measurement and control tasks in water treatment, environmental analysis, and industry. Why we use the JUMO MIDAS: • Versatile use for numerous measurement parameters • Accurate and stable measurement results even during continuous operation • Modern communication interfaces for easy integration • User-friendly menu and flexible alarm management • Robust and reliable in industrial applications Example of a JUMO MIDAS model in the HeylNeomeris range: • JUMO MIDAS C08 – Transmitter for pH, redox, conductivity, and oxygen with multiple measurement channels (Item no.: 802091)

JUMO Midas C08 - OEM - Basic pressure transmitter Typ: 401002/000-456-405-502-20-601-61/000  Input: 0 to 2,5 bar relative pressure  Output: 4 to 20 mA, two-wire  Process connection: G 1/4 DIN EN 837  Process connection material: CrNi (stainless steel)  Seal material: CrNi (stainless steel)  Electrical connection: Cable socket DIN EN 175301-803, form A  Extra code: none  New quality level especially for the OEM sector  Long-term stability below 0.2%  Temperature compensation range extended by 50% to -20 to +100 °C  Device installation 60% faster thanks to QUICKON quick-clamp technology  Vibration resistance 2.5 times higher than the industry standard  Manufactured in Germany For applications that require reliable and long-term realisation of measurement tasks, the pressure transmitter from the Midas family is used as a basic product. In addition to the basic product, the Midas family offers solutions for every specific task. The innovative and patented sensor design of the specially developed ceramic sensor results in excellent long-term stability < 0.2%. The transmitter detects relative pressures from 1.6 to 60 bar in gaseous or liquid media. Areas of application:  Mechanical and plant engineering  compressors  Building services engineering  Industrial pneumatics  Commercial vehicles Added value for the customer:  Process reliability: Thanks to design measures, the pressure transmitter has excellent vibration resistance and can be used under high vibration loads, such as those that occur in commercial vehicles. A fully automatic measuring and calibration system, diagnostic function of the circuit and 100% final inspection guarantee the highest quality.  Cost-effectiveness: QUICKON quick-clamp technology enables time-saving and safe installation. The spring contacts ensure reliable contacting even in the event of temperature fluctuations. This electrical connection shortens assembly times and reduces costs by 60% compared to conventional connection variants.  Versatility: The large selection of measuring ranges as well as process and electrical connections enables universal use of the pressure transmitter.