Room, outdoor and duct resistance thermometers Measuring range from 0 to +40°C (measuring range only in conjunction with transmitter) Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: 1x analog transmitter, output 0 to 10 V (only in conjunction with 1x Pt100 zl) (0-40°C) Protection class IP20 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

JUMO resistance thermometer for temperature measurements in indoor and outdoor areas with operating temperature range -20 to +80 °C JUMO room and outdoor resistance thermometer without transmitter with IP54 protection class Type: 902520/11-635-1003-1/000 The resistance thermometer with IP54 protection class is suitable for temperature measurements in indoor and outdoor areas. With Pt100 in two-wire configuration and a measuring range from -20 to +80 °C, this version is designed for HVAC applications with increased protection requirements. This version is intended for temperature measurements where the device should be better protected against environmental influences than standard room sensors. With a Pt100 in two-wire configuration, an operating range from -20 to +80 °C and IP54 protection class, this resistance thermometer is particularly suitable for HVAC applications where temperatures must be measured reliably indoors or outdoors. Technical Data Design: Room and outdoor resistance thermometer Measuring insert: 1 x Pt100 Circuit type: Two-wire configuration Transmitter: none Operating temperature: -20 to +80 °C Protection class: IP54 Advantages and technical features of the JUMO resistance thermometer for indoor and outdoor measurements suitable for indoor and outdoor areas IP54 protection class for better protected installation locations suitable for temperatures from -20 to +80 °C proven Pt100 for classic temperature measurement tasks direct integration without integrated transmitter good solution for HVAC applications with changing environmental conditions more robust design than standard indoor sensors The main difference compared to simpler indoor variants is the more robust protection class. IP54 makes this version suitable for installation locations where dust or splash water may be present. This makes it well suited for applications where the sensor is used not only in protected indoor environments but also in more demanding surroundings. A Pt100 sensor in two-wire configuration is used for temperature measurement. This is a proven solution for many classic measurement tasks in HVAC applications. Since no transmitter is integrated, this variant is especially suitable for applications where the sensor should be connected directly to compatible evaluation or control technology. Typical Areas of Application room temperature measurement in HVAC applications outdoor temperature measurement on buildings technical indoor and outdoor environments heating, ventilation and air conditioning systems applications with increased protection requirements against dust and splash water JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 6 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions Can I use the thermometer indoors and outdoors? Yes, it is suitable for temperature measurements both indoors and outdoors. What temperature range is the thermometer suitable for? It can reliably measure temperatures from -20°C to +80°C. What are the benefits of the IP54 protection rating? It offers additional protection against dust and splashing water during daily use. Is the thermometer suitable for heating and air conditioning systems? Yes, it is frequently used in heating, ventilation, and air conditioning (HVAC) systems. Can I connect the thermometer directly to my control system? Yes, it is designed for direct connection to compatible monitoring and control systems. Is the thermometer suitable for varying environmental conditions? Yes, it was developed for applications involving diverse environmental conditions. Where is this thermometer typically used? For example, on buildings, in technical rooms, in climate control systems, and in heating, ventilation, and air conditioning (HVAC) systems.

Room, outdoor and duct resistance thermometers  Measuring range from -30 to +80°C  Measuring insert 1x temperature sensor Pt100 in three-wire circuit  Transmitter: without  Protection class IP20   Suitabel for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

JUMO Screw-in Resistance Thermometer with Connection Cable, Loose Screw Connection and Reduced Thermowell JUMO Screw-in Resistance Thermometer with Connection Cable, Loose Screw Connection and Reduced Thermowell, Type: 902050/30-380-1001-1-5,4-27,5-114-11-2500/316 This JUMO screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. The version with loose screw connection and reduced thermowell is particularly suitable for applications where compact dimensions, flexible installation and reliable temperature measurement are required. With 1x Pt100 in a three-wire circuit, silicone connection cable, M10x1 process connection, 27.5 mm installation length and additional kink protection, this version is designed for practical use in technical systems. Technical data Version: Screw-in resistance thermometer with connection cable, loose screw connection and reduced thermowell Measuring insert: 1x Pt100 Circuit type: Three-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Silicone Temperature range: -50 to +200 °C Thermowell diameter: Reduced from 5.4 mm to 3.3 mm Installation length: 27.5 mm Process connection: M10x1 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type addition: Kink protection hose Typical areas of application Wherever a compact design, flexible screw connection and reliable temperature measurement are required, this version is a suitable choice. Air conditioning and refrigeration technology Heating engineering, furnace construction and apparatus engineering Advantages and special features of the JUMO screw-in resistance thermometer Thanks to the thermowell reduced to 3.3 mm, this version is particularly interesting for installation situations with limited space or for measuring points where a slimmer tip is advantageous. At the same time, the loose screw connection allows the thermometer to be adapted more flexibly to the respective installation situation during mounting. This makes the version well suited for applications where a compact design must be combined with a secure process connection. Why should you choose this version from JUMO? This version is a good choice when proven and precise temperature measurement with Pt100 is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many technical applications. In combination with the three-wire circuit, line influences can be compensated more effectively, which supports the most precise possible temperature measurement during operation. The connection cable is also designed for practical use. The silicone cable is suitable for temperatures from -50 to +200 °C and therefore offers good conditions for applications with low or elevated ambient temperatures. With a cable length of 2500 mm, there is also sufficient flexibility for connection to downstream evaluation or control technology. Ferrules according to DIN 46228 Part 4 simplify the electrical connection, while the additional kink protection relieves strain on the cable transition and makes the version more robust in everyday use. The compact installation length of 27.5 mm and the M10x1 process connection make this resistance thermometer particularly interesting for smaller and tighter measuring points. Especially where temperatures in liquid or gaseous media must be monitored reliably and space is limited at the same time, this version offers a practical solution. Type: 902050/30-380-1001-1-5,4-27,5-114-11-2500/316 JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 3 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions Does the thermometer fit into tight installation spaces? Yes, its compact design and short insertion length make it well-suited for measurement points with limited space. For which media can I use the thermometer? The thermometer is designed for temperature measurement in liquid and gaseous media. Can the thermometer be mounted flexibly? Yes, the loose threaded fitting makes it easy to adapt to various installation situations. For which temperatures is the thermometer suitable? It can be used within a temperature range of -50 to +200 °C. Is the connection cable long enough for greater distances? Yes, the silicone connection cable is 2.5 meters long, offering sufficient flexibility during installation. Is the thermometer easy to connect? Yes, the connection cable is fitted with wire end ferrules, which simplifies the electrical connection. Where is this thermometer commonly used? Typical applications include HVAC and refrigeration technology, as well as heating, furnace, and equipment manufacturing. Is this thermometer compatible with my system? Yes, it is suitable for many industrial applications and can be flexibly integrated into various systems. How is the thermometer mounted? It is simply screwed in. The loose threaded fitting facilitates adjustment during installation. Can the thermometer be used in challenging environments? Yes, the protective thermowell reliably shields the sensor from external influences.

Screw-in resistance thermometer with connecting cable and loose screw connection Metal braided connection cablesTemperature range from -50 to +400 °CWith loose screw connectionSingle resistance thermometer1x Pt 100 in two-wire circuitTolerance class according to DIN EN 60 751: Class B (standard)Thermowell diameter: 6 mmInstallation length 37 mmProcess connection: M 10x1 screw connectionConnection cable end: Wire end ferrules to DIN 46 228 Part 4 (standard)Connection cable length: 2500 mmExtracode: Spring bend protection, connection cable shielded The screw-in resistance thermometer with connection cable is specially designed for use in various industries such as air conditioning and refrigeration technology, heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure. The possible applications range from dry to humid environments and, depending on the version, enable precise temperature measurement in the range from -50 to +400 °C. The connection cable of this screw-in resistance thermometer is available in various materials, including PVC, silicone, PTFE and metal braiding. This variety makes it possible to select the right variant for your application. The transition of the connecting cable is strain-relieved and an optional bend protection can be fitted to ensure the longevity of the connection. The measuring insert is equipped as standard with a Pt 100 temperature insert in accordance with DIN EN 60 751, class B in a two-wire circuit. Optionally, the measuring insert can also be selected with Pt 500 or Pt 1000. In addition, the connection can be made in either three- or four-wire circuits to meet individual requirements.

JUMO Screw-in Resistance Thermometer with Threaded Thermowell for Precise Temperature Measurement in Liquid and Gaseous Media JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell, Type: 902050/40-390-1003-1-8-25-111-11-2500/315,317 This screw-in resistance thermometer with connection cable and threaded thermowell is designed for precise temperature measurement in liquid and gaseous media. With its 1x Pt100 in a two-wire circuit, metal braided connection cable, 25 mm installation length, M8 process connection and shielded connection cable, this version is particularly suitable for compact installation situations and applications with increased requirements for temperature resistance and signal transmission. Advantages and special features of this JUMO screw-in resistance thermometer A major advantage of this version is its robust design for more demanding operating conditions. The metal braided connection cable is designed for temperatures from -50 to +300 °C and therefore offers excellent conditions for applications where standard cables reach their limits. At the same time, the shielded cable supports interference-free signal transmission, which can be a practical advantage especially in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer with high temperature resistance and proven Pt100 measurement technology is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many common applications. The two-wire circuit makes this version a classic and practical solution for numerous measuring tasks. The mechanical design is also tailored for practical use. The M8 process connection and the 25 mm installation length make this thermometer particularly interesting for smaller measuring points or confined installation situations. The combination of threaded thermowell and compact design ensures that the version can be integrated well into technical systems where temperatures must be monitored reliably and permanently. In addition, the type addition with kink protection spring helps relieve strain on the cable transition. This special feature makes the version even more robust when the connection cable is subject to mechanical stress or when movement and tensile loads occur during operation. Typical areas of application Air conditioning and refrigeration technology Heating engineering, furnace construction and apparatus engineering Wherever temperatures in liquid or gaseous media must be measured precisely and at the same time a compact, temperature-resistant design is required, this version is a suitable choice. Technical data Version: Screw-in resistance thermometer with connection cable and threaded thermowell Measuring insert: 1x Pt100 Circuit type: Two-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +300 °C Thermowell diameter: M8 Installation length: 25 mm Process connection: M8 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 3 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions Does the thermometer fit into small installation spaces? Yes, its compact design and short insertion length make it well-suited for confined installation areas. For which applications can I use the thermometer? It is suitable for measuring the temperature of liquid and gaseous media in technical systems. Is the thermometer suitable for high temperatures? Yes, it can be used within a temperature range of -50 to +300 °C. Can I use the thermometer in humid environments? Yes, it is designed for both dry and humid environments. Is the connection cable long enough for greater distances? Yes, the connection cable is 2.5 meters long, providing sufficient flexibility during installation. Is the thermometer easy to connect? Yes, the connection cable is fitted with wire end ferrules, making connection easier. Why is the thermometer suitable for industrial systems? The robust connection cable and shielded design ensure reliable operation in everyday use.

JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell JUMO Screw-in Resistance Thermometer with Connection Cable and Threaded Thermowell, Type: 902050/40-390-1001-1-8-25-111-11-2500/315,317 The JUMO screw-in resistance thermometer with Pt100 in a three-wire circuit, metal braided connection cable, M8 process connection and shielded version is particularly suitable for compact measuring points and higher temperature ranges up to +300 °C. This screw-in resistance thermometer is designed for precise temperature measurement in liquid and gaseous media. With 1x Pt100 in a three-wire circuit, metal braided connection cable, installation length of 25 mm, M8 process connection and shielded connection cable, this version is particularly suitable for compact measuring points and applications with increased requirements for temperature resistance and signal transmission. Typical areas of application Measuring points in liquid and gaseous media Dry and humid environments Compact or confined installation situations Applications with vacuum or overpressure Technical systems with increased requirements for the connection cable Technical data Version: Screw-in resistance thermometer with connection cable and threaded thermowell Measuring insert: 1x Pt100 Circuit type: Three-wire circuit Tolerance class: Class B according to DIN EN 60751 Connection cable: Metal braid Temperature range: -50 to +300 °C Thermowell diameter: M8 Installation length: 25 mm Process connection: M8 Connection cable end: Ferrules according to DIN 46228 Part 4 Connection cable length: 2500 mm Type additions: Kink protection spring, shielded connection cable Advantages and special features of the JUMO screw-in resistance thermometer This version shows its strengths especially under more demanding operating conditions. The metal braided connection cable is designed for temperatures from -50 to +300 °C and therefore offers excellent conditions for applications where standard cables are not sufficient. At the same time, the shielded connection cable supports interference-free signal transmission, which can be a practical advantage especially in technical and industrial environments. Why should you choose this version from JUMO? This version is a good choice when a compact resistance thermometer with proven Pt100 measuring technology and improved compensation of line influences is required. The Pt100 used according to DIN EN 60751, Class B, is one of the established solutions in temperature measurement technology and is suitable for many common applications. The three-wire circuit offers advantages compared to a simple two-wire circuit when measured values need to be recorded as precisely as possible. The mechanical design is also tailored for practical use. The M8 process connection and the installation length of 25 mm make this thermometer particularly interesting for smaller measuring points or confined installation situations. The compact design ensures that the version can be integrated well into technical systems where temperatures must be monitored reliably and permanently. JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 3 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions Does the thermometer fit into small installation spaces? Yes, its compact design and short insertion length make it well-suited for confined installation areas. For which applications can I use the thermometer? It is suitable for measuring the temperature of liquid and gaseous media in technical systems. Is the thermometer suitable for high temperatures? Yes, it can be used within a temperature range of -50 to +300 °C. Can I use the thermometer in humid environments? Yes, it is designed for both dry and humid environments. Is the connection cable long enough for greater distances? Yes, the connection cable is 2.5 meters long, providing sufficient flexibility during installation. Is the thermometer easy to connect? Yes, the connection cable is fitted with wire end ferrules, making connection easier. Why is the thermometer suitable for industrial systems? The robust connection cable and shielded design ensure reliable operation in everyday use.

Screw-in resistance thermometer with connection head form J with stepped protection tube for air measurement Measuring range from -50 to +200 °C Single resistance thermometer 1x Pt 100 in two-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 75 mm Process connection: G1/2 threaded connection Extra codes: none The screw-in RTD temperature probe with connection head is specially designed for use in various industries such as air conditioning and refrigeration technology and heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media, with a temperature range of -50 to +400 °C. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure. The measuring insert is fitted as standard with a Pt100 temperature sensor in accordance with the DIN EN 60751:2009 / IEC 60751:2008 standards. This sensor has a temperature coefficient α of 3.850 × 10-3 °C-1 and is installed in a two-wire circuit. Versions with Pt500 or Pt1000 are also available as an option. For more precise measurement results, the connection can be made either in a three-wire or four-wire circuit, and it is also possible to integrate a transmitter into the connection head.

JUMO Dtrans T100 screw-in RTD temperature probe without transmitter, M12 x 1 machine plug connection Measuring range from -50 to + 200 °C 1x Pt100 in four-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 100 mm Process connection: G1/2 screw connection Thermowell material: Stainless steel 316 L (material no. 1.4404/1.4435) EU and China RoHS compliant Extra code: without M12 x 1 push-on connector; protection class IP67 to DIN EN 60529 with attached machine plug USB interface for configuration with setup programme The screw-in resistance thermometer in a compact design consists of a thermowell with built-in temperature sensor, a process connection and a housing for the transmitter electronics. The programmable two-wire transmitter offers a robust solution for the precise recording of temperatures in a temperature measuring range of -50 to + 150°C, with a neck tube up to 260°C and is therefore versatile in use. The device has a USB interface that enables simple configuration via a setup programme. With the help of this programme, parameters such as measuring range, fine adjustment and measuring circuit monitoring can be adjusted to meet the requirements of different applications. The output signal 4 to 20 mA or reversed 20 to 4 mA is available linearised (temperature linear). The device is intended for industrial use and complies with European standards to ensure electromagnetic compatibility (EMC).

UMO Dtrans T100 screw-in RTD temperature probe with programmable transmitter, M12 x 1 machine plug connection Measuring range from -50 to + 150 °C 1x Pt1000 in four-wire circuit Tolerance class: Class A Thermowell diameter: 6 mm Installation length: 50 mm Process connection: without Thermowell material: Stainless steel 316 L (material no. 1.4404/1.4435) EU and China RoHS compliant Extra code: without M12 x 1 push-on connector; protection class IP67 to DIN EN 60529 with attached machine plug USB interface for configuration with setup programme The screw-in resistance thermometer in a compact design consists of a thermowell with built-in temperature sensor, a process connection and a housing for the transmitter electronics. The programmable two-wire transmitter offers a robust solution for the precise recording of temperatures in a temperature measuring range of -50 to + 150°C, with a neck tube up to 260°C and is therefore versatile in use. The device has a USB interface that enables simple configuration via a setup programme. With the help of this programme, parameters such as measuring range, fine adjustment and measuring circuit monitoring can be adjusted to meet the requirements of different applications. The output signal 4 to 20 mA or reversed 20 to 4 mA is available linearised (temperature linear). The device is intended for industrial use and complies with European standards to ensure electromagnetic compatibility (EMC).

Screw-in resistance thermometer with form J connection head  With continuous protection tube Measuring range from -50 to +200 °C Single resistance thermometer 2x Pt 100 in two-wire circuit Tolerance class: Class B (standard) Thermowell diameter: 6 mm Installation length: 50 mm Process connection: screw connection G ½ Extra codes: none The screw-in RTD temperature probe with connection head is specially designed for use in various industries such as air conditioning and refrigeration technology and heating, furnace and apparatus engineering. It offers precise temperature measurement in both liquid and gaseous media, with a temperature range of -50 to +400 °C. The installation design of this thermometer ensures reliable tightness, even under extreme conditions of negative and positive pressure.The measuring insert is fitted as standard with a Pt100 temperature sensor in accordance with the DIN EN 60751:2009 / IEC 60751:2008 standards. This sensor has a temperature coefficient α of 3.850 × 10-3 °C-1 and is installed in a two-wire circuit. Versions with Pt500 or Pt1000 are also available as an option. For more precise measurement results, the connection can be made either in a three-wire or four-wire circuit, and it is also possible to integrate a transmitter into the connection head. Depending on the measurement requirements, a single or dual resistance thermometer can also be selected.

JUMO Wall-Mounted Resistance Thermometer with Pt100 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1003-1/000 The wall-mounted resistance thermometer is suitable for temperature measurements in HVAC applications with increased protection requirements. Equipped with a Pt100 sensor in a two-wire circuit, a measuring range of -30 to +90 °C, and protection class IP65, this version is designed for compact wall-mounted measuring points in indoor and protected outdoor areas. This version is intended for wall-mounted temperature measurements and is especially useful where the sensor is protected inside the housing while requiring a robust outer enclosure. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt100 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of the JUMO Wall-Mounted Resistance Thermometer compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt100 sensor for proven temperature measurement suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version particularly interesting for measuring points where the temperature is to be recorded directly in the area surrounding the housing without requiring a protruding sensing element. This can be advantageous wherever a compact, closed design is preferred and the sensor should remain better protected against mechanical influences. With protection class IP65, this version provides significantly greater protection against dust and water than standard room sensors. This makes it suitable for environments where the housing is exposed to higher levels of stress or where a higher protection rating is required. Especially in HVAC technology, this can be beneficial for installations in more technically demanding environments. Temperature measurement is performed using a Pt100 sensor in a two-wire circuit. This proven sensor configuration is suitable for many standard measurement tasks in temperature measurement technology. Since no transmitter is integrated, this version is particularly well suited for applications where the sensor is connected directly to a suitable control or evaluation unit. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Applications with increased protection requirements against dust and water Heating, ventilation, and air conditioning systems JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 6 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions What can I use this thermometer for? It is ideal for rooms, equipment, or processes where temperature monitoring is required. Can I use the thermometer in damp areas? Yes; thanks to its IP65 rating, the housing is well-protected against dust and water, making it suitable for more demanding environments. Is the device suitable for outdoor use? Yes, it can be used in sheltered outdoor areas, such as under canopies or in weather-protected technical areas. What temperature range is the thermometer suitable for? The device reliably measures temperatures from -30 to +90°C, covering a wide range of applications. Where exactly is the temperature measured? The sensor is housed securely within the casing and measures the temperature in the immediate vicinity of the mounting point. Is the thermometer suitable for my heating or ventilation system? Yes, it is frequently used for temperature monitoring in heating, ventilation, and air conditioning (HVAC) systems. Do I need an additional transmitter? No, the thermometer outputs a Pt1000 signal directly and can be connected to compatible evaluation or control systems. Why doesn't the device have a protruding probe? The enclosed design protects the sensor and allows for compact, unobtrusive wall mounting. Can I use it outdoors or in damp areas? Yes; thanks to its IP65 rating, it is dust-tight and protected against water jets. How robust is the thermometer for everyday use? It is durable, shock-resistant, and suitable for continuous operation.

Wall-Mounted Resistance Thermometer by JUMO with Pt1000 in Two-Wire Circuit and Operating Temperature -30 to +90 °C JUMO Wall-Mounted Resistance Thermometer with Internal Sensor Protection Class IP65 Type: 902520/21-573-1005-1/000 This wall-mounted resistance thermometer from JUMO is suitable for HVAC temperature measurements with a compact housing design. Equipped with Pt1000 in a two-wire circuit and a measuring range of -30 to +90 °C, this version is designed for wall-mounted measuring points in indoor and protected outdoor areas. This version is suitable for wall-mounted measuring points where the sensor should be protected inside the housing while a Pt1000 signal is required. With an operating range of -30 to +90 °C and protection class IP65, this wall-mounted resistance thermometer is particularly suitable for HVAC applications in indoor and protected outdoor areas. Technical Data Version: Wall-mounted resistance thermometer with internal sensor Measuring insert: 1 x Pt1000 Circuit type: Two-wire circuit Transmitter: without Operating temperature: -30 to +90 °C Protection class: IP65 Advantages and Technical Features of this JUMO Thermometer Version compact wall mounting with integrated internal sensor IP65 protection class for increased housing protection requirements closed design without protruding sensing element Pt1000 sensor for compatible control and evaluation systems suitable for temperatures from -30 to +90 °C direct integration without integrated transmitter well suited for HVAC applications with increased protection requirements The internal sensor makes this version especially interesting wherever the temperature should be measured directly around the housing without requiring a separate protruding sensing element. This creates a compact design and is particularly practical where a discreet, closed solution is preferred. Unlike Pt100 versions, this model operates with 1 x Pt1000 in a two-wire circuit. This is particularly useful when the connected control or evaluation system is designed for Pt1000 or when this sensor configuration is preferred. Since no transmitter is integrated, the device is especially suitable for applications where the sensor should be connected directly to a compatible evaluation unit. With protection class IP65, the housing is well protected against dust and water. This makes the version suitable for environments where standard room sensors are not sufficient and a more robust housing is required. Especially in HVAC technology, this can be an advantage for wall-mounted installations in technically demanding areas. Typical Applications Wall mounting in HVAC applications Temperature monitoring in technical indoor areas Protected outdoor areas Heating, ventilation, and air conditioning systems JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 6 onwards. This can be found under ‘Downloads’ for the product. Frequently Asked Questions What can I use this thermometer for? It is ideal for rooms, equipment, or processes where temperature monitoring is required. Can I use the thermometer in damp areas? Yes; thanks to its IP65 rating, the housing is well-protected against dust and water, making it suitable for more demanding environments. Is the device suitable for outdoor use? Yes, it can be used in sheltered outdoor areas, such as under canopies or in weather-protected technical areas. What temperature range is the thermometer suitable for? The device reliably measures temperatures from -30 to +90°C, covering a wide range of applications. Where exactly is the temperature measured? The sensor is housed securely within the casing and measures the temperature in the immediate vicinity of the mounting point. Is the thermometer suitable for my heating or ventilation system? Yes, it is frequently used for temperature monitoring in heating, ventilation, and air conditioning (HVAC) systems. Do I need an additional transmitter? No, the thermometer outputs a Pt1000 signal directly and can be connected to compatible evaluation or control systems. Why doesn't the device have a protruding probe? The enclosed design protects the sensor and allows for compact, unobtrusive wall mounting. Can I use it outdoors or in damp areas? Yes; thanks to its IP65 rating, it is dust-tight and protected against water jets. How robust is the thermometer for everyday use? It is durable, shock-resistant, and suitable for continuous operation.

Room, outdoor and duct resistance thermometers Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

Room, outdoor and duct resistance thermometers Typ: 902520/23-474-1003-1/333,(-40..80°C) Measuring range from -30 to +90°C Measuring insert 1x temperature sensor Pt100 in two-wire circuit Transmitter: without Protection class IP65 Suitable for use in air conditioning technology Room, outdoor and duct resistance thermometers are designed for air conditioning technology and are mainly used for temperature measurement in rooms, air ducts and outdoors. Various plastic device versions with different degrees of protection are available for the respective measuring task. A Pt100 temperature sensor in accordance with DIN EN 60751 class B in a two-wire circuit is installed as standard, but variants with Pt500, Pt1000, Ni1000 and various NTC sensors are also possible. The connection terminals allow optional continuation in three- and four-wire circuits. An integrated measuring transducer can also be selected as an option.

diraVIEW 116 digital indicator from JUMO for processing and visualization of process signals JUMO diraVIEW 116 – Digital indicator (48 × 48 mm) The JUMO diraVIEW 116 is a compact industrial digital indicator for flexible processing and visualization of process signals with integrated control and logic functions. It is particularly suitable for applications where measurement, evaluation, and simple control tasks are to be combined in a single device. The device is designed for universal use and can display and process measured values such as temperature, pressure, or other process variables. The display is provided via two easy-to-read 18-segment LCDs, complemented by status indicators for switching states and timer functions. The device features a universal analog input as well as several freely configurable inputs and outputs. This allows a wide variety of sensor signals to be processed and flexibly linked with relay, logic, or optional analog outputs. Selectors enable internal and external signals to be freely assigned, providing high adaptability for different applications. Optional USB, RS485, or Ethernet interfaces are available for communication. This allows the indicator to be configured locally as well as integrated into higher-level systems such as PLC or control systems. Additional functions such as limit value monitoring, timer, min./max. value storage, tare and hold functions, as well as mathematical and logical link functions significantly expand the range of applications and enable even complex control and monitoring tasks directly within the device. Advantages Universally applicable for various process signals Integrated limit value and alarm monitoring Easy integration into existing automation systems Reduces external control effort through integrated functions Fast commissioning through configuration via setup software Technical data Type: 701511/8-0000-23/000 Format: 48 × 48 mm Input: 1 × universal analog input Outputs: 2 × relays (normally open contact), 1 × digital input, 1 × DI/DO (logic output 0/14 V) Power supply: AC 110–240 V, 48–63 Hz Display: 2 × 18-segment LCD Communication: optional USB, RS485, Ethernet Functions: Min./max. value, hold, tare, timer, limit value monitoring Type addition: without Typical areas of application Mechanical and plant engineering Process and procedural engineering Temperature and pressure monitoring Automation and control technology General industrial measurement and display systems JUMO order code: A JUMO order code uniquely identifies a specific measuring instrument or component based on its configuration. You will find the exact JUMO order code for your instrument configuration in the relevant data sheet from page 18 onwards. This can be found under ‘Downloads’ for the product.

Push-in resistance thermometer with straight connection cable, stainless steel protection tube  Temperature measuring range: -50 ... +260 °C / Silicon  Measuring insert: 1x Pt 100 in two-wire circuit  Installation length: 45 mm  Cable length: 2500 mm  Tolerance class: Class B (standard)  Thermowell diameter: 6 mm  Wire end ferrules  Extra code: with bend protection, cable shielded  Available as single and dual resistance thermometers  Available in straight and angled versions to meet different mounting requirements.  Flexible connection cables  Strain relief to protect against mechanical stress  Meets SIL and PL qualification standards for maximum safety  Optional kink protection Areas of application: - Laboratory technology- Climate cabinets- Solar systems- Heating, air conditioning, ventilation- Apparatus engineering The insertion resistance thermometer offers precise temperature measurement in both liquid and gaseous media. The wide range of variants makes it ideal for various applications in industrial environments. This thermometer ensures reliable performance in dry and damp rooms and enables accurate temperature measurements. The robust design and flexible configuration options ensure precise temperature monitoring.