Plastic electrodes

Our flow cell kit is a simple and economical means of mounting pH and ORP electrodes for inline applications. Compatible with all 12 mm electrodes.

Our flow cell kit is a simple and economical means of mounting pH and ORP electrodes for inline applications. Compatible with all 12 mm electrodes.

It is particularly suitable wherever a fixed installation with Pg13.5 thread, a direct BNC connection, and a robust, service-life-optimized redox measurement are required. JUMO BlackLine Redox plastic shaft electrode with salt bridge, 2 meter fixed cable with BNC connector and fixed protective cage, Pg13.5 (Type code: 201010/65-22-65-2000-76-120/837; Part No.: 00424950) This JUMO BlackLine Redox electrode is the right choice when a robust, permanently installable, and ready-to-connect solution for redox measurements in aqueous media is required. The Pg13.5 screw head allows secure installation in suitable fittings or measurement points, while the pre-attached 2 meter fixed cable with BNC connector enables direct connection to compatible measuring instruments. This makes this version especially convenient for users who want a reliable redox electrode without additional wiring effort. Advantages For redox measurement, the electrode is equipped with a robust platinum tip, which provides reliable measurement values and is easy to clean. This is a clear advantage in applications where redox values must be monitored regularly. The fixed protective cage additionally protects the sensitive sensor area and improves suitability for everyday use, especially at measurement points where the sensor may be exposed to higher mechanical stress. Another advantage is the integrated salt bridge. It is particularly useful when measuring in low-ion media or at higher flow rates. In such cases, it can help extend the electrode’s service life. This makes it a strong choice for users who are looking for more than a standard redox electrode and need a version suitable for more demanding operating conditions. Technical data The reference system with polymerized KCl gel electrolyte is suitable for many general water applications. The proven cartridge reference system helps keep the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. An integrated temperature sensor is not available in this series. The 120 mm insertion length makes the electrode suitable for many common installation situations. Typical applications Drinking water monitoring Water treatment, swimming pools, aquatics Greenhouse technology as well as lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

It is particularly useful wherever a robust, ready-to-connect, and service-life-optimized redox measurement is required, for example in drinking water monitoring or aquatics. JUMO BlackLine Redox plastic shaft electrode with salt bridge, 2 meter fixed cable without thread with BNC connector and fixed protective cage (Type code: 201010/65-22-45-2000-76-120/837; Part No.: 00417301) This version of the JUMO BlackLine Redox electrode is a good choice when a robust and ready-to-connect solution for redox measurement in aqueous media is required. Thanks to its permanently attached 2 meter cable with BNC connector, the sensor can be quickly integrated into suitable measurement systems without additional connection cables. This version offers clear advantages, especially in applications where simple installation, a protected sensor design, and easy day-to-day handling are important. Advantages of the JUMO BlackLine electrode For redox measurement, a robust platinum tip is used, which provides reliable measurement values and is easy to clean. This makes the electrode particularly interesting for users who require a sensor for regular measurement tasks while valuing a low-maintenance design. The integrated protective cage additionally protects the sensitive sensor area and is especially useful when the electrode is frequently used, moved, or exposed to more demanding environments. Another advantage of this version is the integrated salt bridge. It is particularly recommended for low-ion media or higher flow rates, as it can help extend the electrode’s service life. This makes it a strong choice for users who are not only looking for a standard redox electrode but for a version suitable for more challenging operating conditions. Technical data The reference system with polymerized KCl gel electrolyte is suitable for many general water applications and supports reliable measurement in aqueous media. An integrated temperature sensor is not available in this series. With a standard insertion length of 120 mm and a head design without thread, this version is particularly suitable for applications where direct cable connection via BNC connector is preferred. Typical applications Drinking water monitoring and water treatment Swimming pools, aquatics, greenhouse technology Lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

This electrode is particularly suitable wherever a fixed installation with Pg13.5 thread, a direct cable connection, and a protected sensor design are required. JUMO BlackLine pH plastic shaft electrode with salt bridge, 2 meter fixed cable with BNC connector and fixed protective cage, Pg13.5 (Type code: 201005/65-18-65-2000-76-120/837; Part No.: 00424828) This version of the JUMO BlackLine pH electrode is ideal when a robust, ready-to-connect, and permanently installable solution for pH measurement in aqueous media is required. The Pg13.5 screw head makes the sensor particularly suitable for installation situations where a secure and fixed mounting is needed. The pre-mounted 2 meter fixed cable with BNC connector enables direct connection to compatible measurement systems and eliminates the need for additional accessories. Advantages of the JUMO BlackLine electrode A major advantage of this version is the combination of a fixed protective cage, fixed cable, and salt bridge. The protective cage helps protect the sensitive sensor area from mechanical stress during daily operation. This is especially beneficial in applications where the electrode is permanently installed but may be exposed to more demanding conditions in use. The fixed cable with BNC connector also makes this version particularly convenient for users who prefer a ready-to-use solution. Technical data The integrated salt bridge is particularly useful when measuring in low-ion media or in applications with higher flow rates. In such cases, it can help extend the service life of the electrode. This makes this version especially suitable for users who are not only looking for a standard sensor, but for a pH electrode that performs reliably even under more demanding conditions. For pH measurement, the electrode is equipped with proven JUMO UW glass and is designed for a measuring range of pH 0 to 12, with short-term operation up to pH 14. The reference system with polymerized KCl gel electrolyte supports stable measurements in general aqueous media. An integrated temperature sensor is not available in this series. Typical applications Drinking water monitoring Water treatment Swimming pools, aquatics Greenhouse technology Lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes Why buy this electrode? If you are looking for a robust and ready-to-use pH electrode for aqueous media, this BlackLine version is a strong choice. The fixed cable with BNC connection reduces the need for additional accessories, the protective cage safeguards the sensor during operation, and the salt bridge provides a clear advantage in low-ion media or applications with higher flow rates.

The JUMO BlackLine is particularly well suited for applications where direct cable connection, a protected sensor design, and longer service life under more demanding measurement conditions are required. JUMO BlackLine pH plastic shaft electrode with salt bridge, 2 meter fixed cable, BNC connector and fixed protective cage (Type 201005/65-18-45-2000-76-120/837; Part No. 00417300) This version of the JUMO BlackLine pH electrode is especially suitable when a ready-to-connect and robust solution for pH measurement in aqueous media is required. Thanks to its permanently attached 2-meter cable with BNC connector, the sensor can be directly integrated into compatible measurement systems without the need for an additional separate connection cable. This reduces installation effort and is particularly convenient when a simple, ready-to-use connection is required. Advantages of the BlackLine electrode Another advantage is the permanently integrated protective cage. It protects the sensitive sensor area during daily operation and makes this electrode especially suitable for applications where the sensor is handled frequently or used in more demanding environments. This makes it a good choice for users who require not only accurate measurement but also a more robust design. For pH measurement, the electrode is equipped with proven JUMO UW glass and covers a range from pH 0 to 12, with short-term operation up to pH 14. The reference system with polymerized KCl gel electrolyte is suitable for many general water applications. In addition, this version includes a salt bridge. This is particularly advantageous in low-ion media or at higher flow rates, as it can extend the electrode’s service life. In such applications, this version offers clear benefits compared to standard models without a salt bridge. The fixed cable also provides clear advantages in daily use: it is integrated, includes kink protection, and is especially practical for use in humid environments. Anyone looking for a pH electrode that is quick to connect, robust in design, and reliable even under more demanding conditions will find this BlackLine version a strong choice. Typical applications Drinking water monitoring and water treatment Swimming pools, aquatics, greenhouse technology Lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes Why to buy The electrode is delivered ready to connect, including the 2 m fixed cable and BNC connector. The integrated protective cage improves sensor protection in everyday use. The salt bridge helps extend service life in low-ion media or at higher flow rates. This makes it a practical and immediately usable solution.

With an S8 Pg13.5 screw head and a 120 mm insertion length, the electrode can be integrated into many common measurement tasks. It is used across a wide range of applications such as drinking water monitoring or swimming pools. JUMO ecoLine Redox plastic shaft electrode with S8 Pg13.5 screw head and attachable protective cage (201010/53-22-22-0000-00-120/000; Part No. 00357020) The JUMO ecoLine Redox plastic shaft electrode is designed for reliable redox measurements in general aqueous media and offers a cost-effective solution for many standard applications. Thanks to its PEI plastic shaft and attachable protective cage, this version is particularly suitable for practical use with portable measuring devices or wherever additional sensor protection is required in everyday operation. For redox measurement, a robust platinum tip is used, which ensures stable measurement values and is easy to clean. The electrode is complemented by a proven reference system with a polymerized KCl gel electrolyte, which is well suited for general water applications. The JUMO cartridge reference system helps keep the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. Typical applications Drinking water monitoring and water treatment Swimming pools, aquatics, greenhouse technology Lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Environmental applications Beverage and food industry Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

With an S8 Pg13.5 screw head and a 120 mm insertion length, the electrode can be integrated into many common measurement tasks. It is used in a wide range of applications such as drinking water monitoring or swimming pools. JUMO ecoLine Redox plastic shaft electrode with S8 Pg13.5 screw head and attachable protective cage (201010/53-22-22-0000-00-120/000; Part No. 00357020) The JUMO ecoLine Redox plastic shaft electrode is designed for reliable redox measurements in general aqueous media and offers a cost-effective solution for many standard applications. Thanks to its PEI plastic shaft and attachable protective cage, this version is particularly suitable for practical use with portable measuring devices or wherever additional sensor protection is required in everyday operation. For redox measurement, a robust platinum tip is used, which ensures stable measurement values and is easy to clean. The electrode is complemented by a proven reference system with a polymerized KCl gel electrolyte, which is well suited for general water applications. The JUMO cartridge reference system helps keep the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. Typical applications Drinking water monitoring and water treatment Swimming pools, aquatics, greenhouse technology Lightly contaminated utility, process, and wastewater Also suitable for rainwater, pond, and surface water Environmental applications Beverage and food industry Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

This electrode is resistant thanks to its PEI plastic shaft and offers easy handling. For this reason, it is low-maintenance and protected against damage due to its design. JUMO ecoLine pH plastic shaft electrode with S8 Pg13.5 screw head and attachable protective cage (201005/53-18-22-0000-00-120/000; Part No. 00357022) The JUMO ecoLine pH plastic shaft electrode is a practical solution for reliable pH measurements in general aqueous media. It combines a good price-performance ratio with a robust design and is especially suitable for applications where the sensor needs additional protection during mobile use. The PEI plastic shaft provides a durable construction, while the attachable protective cage offers additional protection for the sensor. This is a particular advantage when used with portable measuring devices, making everyday handling easier and helping to prevent damage. Typical applications Equipped with an S8 Pg13.5 screw head and a standard insertion length of 120 mm, this electrode uses a polymerized KCl gel electrolyte reference system, which is well suited for measurements in general aqueous media. The proven JUMO cartridge reference system helps keep the electrolyte free of silver ions throughout its service life, making it less susceptible to certain electrode poisons. An integrated temperature sensor is not available in this series. Drinking water monitoring and water treatment Swimming pools, aquatics Greenhouse technology Lightly contaminated utility, process, and wastewater Not recommended for: Electroplating water treatment Industrial process and wastewater Ultrapure water Therapeutic baths Biotech and sterilization processes

Thanks to its robust design, this version is particularly suitable for thermally demanding process conditions. JUMO tecLine PRO pH electrode as process electrode with HT glass, annular gap diaphragm, Pg13.5 screw head and salt reservoir This pH electrode is designed for demanding pH measurements in process applications. It is particularly suitable for areas where high mechanical and chemical resistance is required. With its design as a process electrode featuring HT glass, open annular gap diaphragm, Pg13.5 screw head, and salt reservoir, this version is optimized for robust operating conditions. Technical data Basic type: JUMO tecLine PRO pH combination electrode Basic type extension: process electrode Sensing element: HT glass Measuring range: pH 0 to 14 Temperature range: 0 to +110 °C Diaphragm: annular gap diaphragm, gel made of polymerized solid electrolyte (“diaphragm-free”) Electrical connection to electrode: Pg13.5 screw head Additional features: salt reservoir Advantages and special features A key advantage of this version lies in its robust construction. According to your description, the electrode has a stable PVDF body, which practically eliminates the risk of sensor breakage. This is particularly important in industrial applications where the measuring point must not only provide reliable pH values but also withstand everyday mechanical stress. At the same time, the electrolyte of this combination electrode ensures stable readings even in critical, sulfite-containing media. This makes the electrode especially interesting for applications requiring a durable and process-suitable solution. Why should you choose this electrode? This version is particularly suitable when a robust process electrode is required for demanding media and elevated temperatures. The HT glass is designed for a measuring range of pH 0 to 14 and temperatures from 0 to +110 °C. This makes it ideal for processes that require both high temperature resistance and reliable pH measurement. The open annular gap diaphragm with gel made of polymerized solid electrolyte is also advantageous for applications requiring a durable and low-maintenance design. The salt reservoir further enhances the overall configuration. The connection side is also designed for professional use. The Pg13.5 screw head allows proper integration into suitable measuring systems. Additionally, a Pt1000 temperature sensor is integrated according to your general description. This is especially useful when temperature needs to be measured directly at the process point, for example for temperature compensation or additional process monitoring. Combined with its robust construction, this results in a well-designed electrode for applications requiring reliable pH measurement, temperature resistance, and high durability. Typical applications chemical industry wastewater treatment sewage treatment plants as well as the paper industry Wherever a durable process electrode with stable measurement performance and robust construction is required, this version is particularly suitable. It can fully demonstrate its strengths, especially under thermally demanding process conditions.

General descriptionThe electrodes are characterised by high mechanical and chemical resistance. Due to the stable PVDF body, there is practically no risk of the sensor breaking. The electrolyte of these combination electrodes guarantees a stable measured value, even in critical media containing sulphite.A Pt1000 temperature sensor is integrated. Depending on the application, the electrodes can be manufactured as pH or redox electrodes. An open annular gap diaphragm is used as the diaphragm.Areas of applicationChemical industryWaste water treatmentSewage treatmentPaper industrySelected version:Basic type: JUMO tecLine PRO pH combination electrodeBasic type extension: Process electrodeActive part: HT glassDiaphragm: annular gap diaphragmElectrical connection to electrode: VP plug-in head Pg13.5Extra codes: Salt reserve, with integrated Pt1000Order code: 201020/79-12-10-18/837, 841

Anyone looking for a pH electrode for process applications and placing value on UW glass, annular gap diaphragm, screw head Pg13.5, salt reservoir, and an especially robust design will make a solid choice with this JUMO tecLine PRO variant. JUMO tecLine PRO pH electrode as process electrode with UW glass, annular gap diaphragm, screw head Pg13.5 and salt reservoir This JUMO pH electrode is designed for demanding pH measurements in process applications. It is particularly suitable for areas where high mechanical and chemical resistance is required. As a process electrode with UW glass, open annular gap diaphragm, screw head Pg13.5, and salt reservoir, this version is designed for robust operating conditions and is significantly more durable than sensitive standard sensors. Advantages and Features A key advantage of this version is its robust construction. According to your description, the electrode features a stable PVDF body, which effectively eliminates the risk of breakage of the sensor. In industrial applications, this is an important factor when the measuring point must not only provide reliable pH values but also withstand mechanical stress in everyday operation. At the same time, the electrolyte of this combination electrode ensures stable measurement signals even in critical sulfite-containing media. This makes the electrode particularly suitable for applications where other designs may reach their limits more quickly. Why choose this electrode? This version is especially suitable when a robust process electrode is required for demanding media and industrial environments. The UW glass is designed for process applications, while the open annular gap diaphragm provides advantages in applications requiring a durable and process-compatible design. The additional salt reservoir can extend service life and is beneficial when long-term stability at the measuring point is required. This makes the electrode particularly attractive for users seeking a reliable and durable solution for pH measurement. The connection side is also designed for professional use. The screw head Pg13.5 enables compatible integration into suitable measurement systems. According to your description, a Pt1000 temperature sensor is also integrated. This is especially useful when temperature must be measured directly at the process point, for example for temperature compensation or additional process monitoring. Typical Applications Chemical industry Wastewater treatment Wastewater treatment plants Pulp and paper industry Wherever a durable process electrode with stable measurement performance and a robust design is required, this version is particularly suitable. It can demonstrate its strengths especially in demanding industrial environments. Technical Data Basic type: JUMO tecLine PRO combination pH electrode Type: Process electrode Sensing element: UW glass Diaphragm: annular gap diaphragm Electrical connection: screw head Pg13.5 Type additions: salt reservoir

General descriptionThe electrodes are characterised by high mechanical and chemical resistance. Due to the stable PVDF body, there is practically no risk of the sensor breaking. The electrolyte of these combination electrodes guarantees a stable measured value, even in critical media containing sulphite.A Pt1000 temperature sensor is integrated. Depending on the application, the electrodes can be manufactured as pH or redox electrodes. An open annular gap diaphragm is used as the diaphragm.Areas of applicationChemical industryWaste water treatmentSewage treatmentPaper industrySelected version:Basic type: JUMO tecLine PRO pH combination electrodeBasic type extension: Process electrodeActive part: UW glassDiaphragm: annular gap diaphragmElectrical connection to electrode: VP plug-in head Pg13.5Type supplements: Salt reserve, with integrated Pt1000Order code: 201020/79-18-10/837, 841

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is suitable for pool, groundwater and drinking water.Platinum - for standard applications in the pool and environmental sector as well as for normal or high temperature resistanceGold - used in connection with chlorine electrolysis and for normal or high temperature resistance

This electrode is available as an inexpensive solution as well as with a double diaphragm for higher temperature resistance. It is suitable for general laboratory applications, pH & chlorine in swimming pools & whirlpools.

This electrode is available as an inexpensive solution as well as with a double diaphragm for higher temperature resistance. It is suitable for general laboratory applications, pH & chlorine in swimming pools & whirlpools.

This electrode is available as an inexpensive solution as well as with a double diaphragm for higher temperature resistance. It is suitable for general laboratory applications, pH & chlorine in swimming pools & whirlpools.

This electrode is available as an inexpensive solution as well as with a double diaphragm for higher temperature resistance. It is suitable for general laboratory applications, pH & chlorine in swimming pools & whirlpools.

This electrode is available as an inexpensive solution as well as with a double diaphragm for higher temperature resistance. It is suitable for general laboratory applications, pH & chlorine in swimming pools & whirlpools.