N-LF1210 conductivity measuring cell C=1.0 with PT100, 1/2 inch screw-in cell and solenoid valve connector

- 1 side connected to solenoid valve connector without seal ("Plug and Play", as plug only has to be plugged onto measuring cell)- 1 side labelled cable with wire end ferruleswhite: PT100brown: PT100yellow: Measuring cell SL green: Measuring cellblue: shielding

Neomeris Conductivity & TDS Calibration Solution 147 μS/cm ± 1% (25 °C), 250 ml – Precise calibration for reliable EC and TDS measurements The Neomeris Conductivity & TDS Calibration Solution, with a stable reference value of 147 μS/cm ± 1% at 25 °C, is specially designed for calibrating measuring instruments used to determine electrical conductivity (EC) and total dissolved solids (TDS). It ensures precise and reproducible measurement results in numerous areas of application – from environmental analysis to industrial process control. Product advantages at a glance: ✔️ Precise calibration: Constant conductivity value with an accuracy of ± 1 % at 25 °C – ideal for precise requirements. ✔️ Certificate of analysis included: Each 250 ml bottle comes with a free certificate confirming the quality and accuracy of the solution. ✔️ Safe handling: The innovative hygienic cap reliably protects the solution from contamination. ✔️ Easy dosing: Squeezing the bottle releases the required amount of solution into the upper part – ideal for direct calibration without additional accessories. ✔️ 250 ml content: Practical for regular use in laboratories, businesses and educational institutions. Areas of application: Water and environmental analysis: Assessment of water quality by monitoring mineral and ion concentrations. Food and beverage industry: Ensuring product consistency and hygiene through precise conductivity measurements. Agriculture & hydroponics: Monitoring nutrient availability in soils and nutrient solutions. Industrial processes: Monitoring in electroplating, chemical production and energy generation. Research and teaching: Reference solution for precise experiments and training. Neomeris – For reliable EC and TDS measurements. Rely on quality, safety and verifiability – with professional calibration solutions from Neomeris, including a certificate of analysis.

Neomeris Conductivity & TDS Calibration Solution 1413 μS/cm ± 1% (25 °C), 250 ml – Precise calibration for reliable EC and TDS measurements The Neomeris Conductivity & TDS Calibration Solution, with a stable reference value of 1413 μS/cm ± 1% at 25 °C, is specially designed for calibrating measuring instruments used to determine electrical conductivity (EC) and total dissolved solids (TDS). It ensures precise and reproducible measurement results in numerous areas of application – from environmental analysis to industrial process control. Product advantages at a glance: ✔️ Precise calibration: Constant conductivity value with an accuracy of ± 1 % at 25 °C – ideal for precise requirements. ✔️ Certificate of analysis included: Each 250 ml bottle comes with a free certificate confirming the quality and accuracy of the solution. ✔️ Safe handling: The special hygienic cap reliably protects the solution from contamination. ✔️ Easy dosing: Squeezing the bottle releases the required amount of solution into the upper part – ideal for direct calibration without additional accessories. ✔️ 250 ml content: Practical for regular use in laboratories, businesses and educational institutions. Areas of application: Water and environmental analysis: Monitoring mineral and ion concentrations to assess water quality. Food and beverage industry: Ensuring product consistency and hygiene through precise conductivity measurements. Agriculture & hydroponics: Monitoring nutrient availability in soils and nutrient solutions. Industrial processes: Process control in electroplating, chemical production and energy generation. Research and teaching: Reference solution for precise experiments and training. Neomeris – For reliable EC and TDS measurements. Rely on quality, safety and verifiability – with professional calibration solutions from Neomeris, including a certificate of analysis.

Instrument for measuring the electrical conductivity of aqueous solutions in conjunction with two-electrode measuring cells. Designed as wall-mounted version.Operation at 230 V AC or 24 V DC possible2 potential-free relays - changeover switch for limit value switching (hysteresis 5 % fixed)Alphanumeric display with 2 x 16 charactersTemperature measurement and temperature display from 0.0 °C to 90.0 °C when a Pt100 is connectedSwitchable temperature compensation with 2.2 % / K up to 90 °CMonitoring of the temperature sensor for sensor break and error message on the displaySwitchable mode of operation for relay controlOutput of the measured value with 0 - 10 V and 4 - 20 mA Technical data Measuring ranges: dependent on measuring cell and amplification Temperature compensation: Linear 2.2 % / K, can be switched off, reference temperature 25 °CLimit value displays: Optical by means of 2 LEDs, 2 limit values adjustable over the measuring range Limit value outputs: 1 potential-free changeover contact, max. 6 A / 250 V AC1 change-over contact to 230V AC (terminal 21) Analog outputs: 0 - 10 V, Ra > 1 kOhm; corresponds to 0 - 20 / 200 / 2000 μS/cm 4 - 20 mA, Ra < 500 Ohm; corresponds to 0 - 20 / 200 / 2000 μS / cm Power supply: 22 - 26 V DC, protected against reverse polarity, electrically isolated, 1000 V insulation voltage, or 230 V 50/60 Hz Power consumption: Approx. 3 W / 3 VA Protection class: IP 65 Housing: Surface-mounted housing (polycarbonate) 120 x 122 x 57 mm Connections: 4 x M16 cable entries on the bottom of the housing.

- 1 side connected to solenoid valve connector without seal ("Plug and Play", as plug only has to be plugged onto measuring cell)- 1 side labelled cable with wire end ferruleswhite: PT100brown: PT100yellow: Measuring cell SL green: Measuring cellblue: shielding

Neomeris Conductivity & TDS Calibration Solution 84 μS/cm ± 1% (25 °C), 250 ml – Precise calibration for reliable EC and TDS measurements The Neomeris Conductivity & TDS Calibration Solution with a defined value of 84 μS/cm ± 1% at 25 °C is specially designed for calibrating electrical conductivity (EC) and total dissolved solids (TDS) measuring instruments. It ensures precise and reproducible measurement results in a wide range of applications – from water analysis to industrial process monitoring. Product advantages at a glance: ✔️ Precise calibration: Stable reference value with an accuracy of ± 1 % at 25 °C – ideal for precise requirements. ✔️ Certificate of analysis included: Each bottle comes with a free certificate confirming the quality and accuracy of the solution. ✔️ Safe handling: The special hygienic cap reliably protects the solution from contamination. ✔️ Easy dosing: Squeezing the bottle releases the required amount of solution into the upper part – ideal for direct calibration without additional accessories. ✔️ 250 ml content: Practical for regular use in laboratories, businesses and educational institutions. Areas of application: Water and environmental analysis: Assessment of water quality by monitoring mineral and ion concentrations. Food and beverage industry: Ensuring product consistency and hygiene through precise conductivity measurements. Agriculture & hydroponics: Monitoring nutrient availability in soils and nutrient solutions. Industrial processes: Monitoring in electroplating, chemical production and energy generation. Research and teaching: Reference solution for precise experiments and training. Neomeris – For reliable EC and TDS measurements. Rely on quality, safety and verifiability – with professional calibration solutions from Neomeris, including a certificate of analysis.