Find everything you need for the water analysis in the boiler house in this Heyl analysis set:
We offer individual versions, if you want a different composition.
Content of Analysis Case Boiler House:
- Titration kits:
1 Duroval® A, 1 Duroval® B, 1 Duroval® CPM
- Colour comparison kits Testoval®:
- 1 sulphite,
- 1 Phosphatest®
- 1 electronic pH meter pHep + (pH value: 0.0-14.0, resolution of 0.1)
- 1 buffer solution pH 7.01 (pouch), 1 Buffer solution pH 10.01 (pouch)
- 1 conductivity meter DiST 4
(Range: 0-19.99 mS/cm, resolution: 0.01 mS/cm)
- 1 conductivity solution 5000 uS/cm
The practical analysis case contains a complete hand-held laboratory for testing the filling water of heating systems according to VDI guideline 2035.
The conductivity meter and pH meter are IP65 certified, which means "dust-tight and protected against water jets" and have replaceable probes.
Contents:
Electronic conductivity meter with exchangeable probe for determining the conductivity in the range 0-3999 μS/cm with a resolution of 1 μS/cm and the TDS value in the range 0-2000PPM with a resolution of 1 PPM. Automatic temperature compensation 0-60°C. IP65! Conductivity Calibration Solution EC 1413 μS/cm, +-1% @25°C, 5 bags a 20ml
Electronic pH meter with exchangeable probe for determining the pH value in the range of 0.0-14.0 with a resolution of 0.1 pH
Buffer solution pH 4.01, +-1% @25°C, 5 bags of 20ml
Buffer solution pH 7.01, +-1% @25°C, 5 bags of 20ml
Buffer solution pH 10.01, +-1% @25°C, 5 bags of 20ml
Duroval A complete with measuring tube, indicator, dosing pipette calibrated 0-30 °dH and 50 ml titration solution for approx. 100 analyses with measuring time: approx. 2 minutes.
Duroval B complete with measuring tube, indicator, dispensing pipette calibrated 0-2 °dH and 50 ml titration solution for approx. 100 analyses with a measuring time of approx. 2 minutes
According to VDI Guideline 2035, Sheet 2, changes in the pH value or excessive electrical conductivity (LF) in hot water heating systems should be avoided to prevent corrosion damage to heating systems. With the help of our supplied solutions, indicators and testers, an optimal control and monitoring of the relevant values can take place. The appropriate values for your heating system can be found in the VDI guideline 2035.
We regularly carry out team training courses for facility managers and heating installers in the correct application. Please contact us.
The practical analysis case contains a complete hand-held laboratory for testing the filling water of heating systems according to VDI guideline 2035.
The conductivity meter and pH meter are IP65 certified, which means "dust-tight and protected against water jets" and have replaceable probes.
Contents:
Electronic conductivity meter with exchangeable probe for determining the conductivity in the range 0-3999 μS/cm with a resolution of 1 μS/cm and the TDS value in the range 0-2000PPM with a resolution of 1 PPM. Automatic temperature compensation 0-60°C. IP65. Conductivity Calibration Solution EC 1413 μS/cm, +-1% @25°C, 5 bags a 20ml
Electronic pH meter with exchangeable probe for determining the pH value in the range of 0.0-14.0 with a resolution of 0.1 pH
Buffer solution pH 4.01, +-1% @25°C, 5 bags of 20ml
Buffer solution pH 7.01, +-1% @25°C, 5 bags of 20ml
Buffer solution pH 10.01, +-1% @25°C, 5 bags of 20ml
Duroval A complete with measuring tube, indicator, dosing pipette calibrated 0-30 °dH and 50 ml titration solution for approx. 100 analyses with measuring time: approx. 2 minutes.
Duroval B complete with measuring tube, indicator, dispensing pipette calibrated 0-2 °dH and 50 ml titration solution for approx. 100 analyses with a measuring time of approx. 2 minutes
According to VDI Guideline 2035, Sheet 2, changes in the pH value or excessive electrical conductivity (LF) in hot water heating systems should be avoided to prevent corrosion damage to heating systems. With the help of our supplied solutions, indicators and testers, an optimal control and monitoring of the relevant values can take place. The appropriate values for your heating system can be found in the VDI guideline 2035.
We regularly carry out team training courses for facility managers and heating installers in the correct application. Please contact us.
Scope of delivery:
Conductivity electrode with integrated temperature sensor
|
Version:
Professional
Our portable multi-parameter measuring device with innovative high-resolution colour display is suitable for working in all conditions and offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This allows the user to easily and intuitively use the instrument at any time.
The meter has an automatic, up to five-point, conductivity calibration for the most common conductivity calibration standards. You are supported by an intuitive symbolism on the backlit screen, including the indication of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter meter is delivered in our professional measuring case, which contains the measuring electrode, as well as our respective buffer solutions and the instructions.
Complementary advantages of the Professional Plus version:
GLP functions: Date and time, recall of calibration data and "Calibration due" function
Integrated data logger for up to 1000 data, automatic and manual
PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software
Automatic brightness control of the display (prolongs battery life)
Only 6 keys for easy control of all functions of the unit
230V power supply unit
Scope of delivery:
Polarographic oxygen sensor, cable length 3 metres
|
Version:
Professional
Our portable multi-parameter meter with innovative high-resolution colour display is suitable for working in all conditions and, like our other available Professional meters in the case, offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This means that the user can also use the device easily and intuitively at any time.The instrument has an automatic, up to two-point, oxygen calibration with an adjustable manual compensation factor of the salinity for the automatic temperature-compensated measurement of the temperature. You are assisted by intuitive symbols on the backlit screen, including display of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter measuring device is supplied in our professional measuring case, which contains the oxygen electrode, two replacement membranes, the instructions and, depending on the version, a 30 ml refill solution. Complementary advantages of the Professional Plus version:Optical oxygen sensor (higher accuracy in the lower measuring range)GLP functions: Date and time, recall of calibration data and "Calibration due" function
Integrated data logger for up to 1000 data, automatic and manual
PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software
Automatic brightness control of the display (prolongs battery life)
Only 6 keys for easy control of all functions of the unit
230V power supply unit
Scope of delivery:
pH and conductivity electrode with integrated temperature sensor
|
Version:
Professional
Our portable multi-parameter measuring device with innovative high-resolution colour display is suitable for working in all conditions and offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This allows the user to easily and intuitively use the instrument at any time.
The meter has automatic pH calibration with USA and NIST buffers with up to three points for pH and one point for ORP. Up to five fixed points, as well as one individual calibration point, are available for calibrating the conductivity electrode. You are supported by an intuitive symbolism on the backlit screen, including the indication of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter meter is delivered in our professional measuring case, which contains the selected measuring electrodes, as well as our respective buffer solutions and the instructions.
Complementary advantages of the Professional Plus version:
GLP functions: Date and time, recall of calibration data and "Calibration due" function
Integrated data logger for up to 1000 data, automatic and manual
PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software
Automatic brightness control of the display (prolongs battery life)
Only 6 keys for easy control of all functions of the unit
230V power supply unit
Scope of delivery:
pH electrode with integrated temperature sensor
|
Version:
Professional
Our portable multi-parameter measuring device with innovative high-resolution colour display is suitable for working in all conditions and offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This allows the user to easily and intuitively use the instrument at any time.
The meter has automatic pH calibration with USA and NIST buffers with up to three points for pH and one point for ORP. You are supported by an intuitive symbolism on the backlit screen, including the indication of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter meter is delivered in our professional measuring case, which contains the selected measuring electrodes, as well as our respective buffer solutions and the instructions.
Complementary advantages of the Professional Plus version:
GLP functions: Date and time, recall of calibration data and "Calibration due" function
Integrated data logger for up to 1000 data, automatic and manual
PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software
Automatic brightness control of the display (prolongs battery life)
Only 6 keys for easy control of all functions of the unit
230V power supply unit