Capacity measurement ion exchanger cartridgeOur Neomeris N-FLASH10 conductivity meter in a T-piece with 3/8 inch connection is a conductivity measuring instrument that is used to monitor the electrical conductivity of water after flowing through the ion exchanger cartridge. The measuring instrument including the integrated measuring cell is battery operated and permanently installed in the T-piece. If the measured electrical conductivity is below the limit value of 10µS/cm, the green LED flashes; if it is above, the red LED flashes, indicating that a cartridge or resin change is required. Due to the T-piece used, the measuring device can also be integrated very easily and is optimally installed in the liquid flow for a stable measurement. Measuring principle: The measuring cell generates an electrical signal that is proportional to the conductivity of the liquid. This signal is processed in the device and the LED is controlled via the programming stored in the device. Application: Conductivity meters are often used in water treatment plants in the process industry.Technical data:Screw-in thread: 3/8"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <10μS/cm LED red >10μS/cm

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <20μS/cm LED yellow 20-50μS/cm LED red >50μS/cm Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <20μS/cm LED yellow 20-50μS/cm LED red >50μS/cm Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Features of the N-FLASH50 Device The N-FLASH50 is a compact, battery-powered conductivity meter designed to monitor conductivities in the range of 0 to 50 µS/cm. Thanks to its handy design, it is ideal for mobile use and short-term measurements directly on site. The clear LED display allows quick evaluation of measurement results without additional analysis devices. Mobile Conductivity Meter for Quick Checks Three integrated LEDs clearly indicate the current measurement status: green signals a safe range, yellow indicates threshold levels, and red warns of excessively high conductivity. The integrated 3/4"-threaded measurement cell allows direct installation in pipelines and ensures uncomplicated measurement during ongoing operations. Battery operation provides maximum flexibility, independent of external power supply. Why Conductivity Is Measured in Water Treatment Conductivity indicates how many dissolved salts and ions are present in water. It is therefore an important indicator for assessing water quality. In water treatment, it is used to monitor desalination and treatment processes and to detect deviations from target values early. Excessively high conductivity values can indicate exhausted filters, defective membranes, or contamination. Regular measurement protects equipment, ensures process quality, and helps comply with regulatory limits. Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <20μS/cm LED yellow 20-50μS/cm LED red >50μS/cm Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <20μS/cm LED yellow 20-50μS/cm LED red >50μS/cm Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <20μS/cm LED yellow 20-50μS/cm LED red >50μS/cm Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <20μS/cm LED yellow 20-50μS/cm LED red >50μS/cm Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Technical data: Screw-in thread: 1/4"; 1/2"; 3/4"; others available upon requestMaterial housing: POM black Material lid: Plexiglas Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C= 0.6 +/- 10% Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: without Display: LED green <20μS/cm LED yellow 20-50μS/cm LED red >50μS/cm Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

Technical data: Measuring range: 0 - 10 μS/cm (without temperature compensation) <0.1 <0.5 < 1.0 < 5.0 < 10 μS/cm LED display: 3x green; 1x yellow; 1x red Power supply: 100-240 VAC plug-in power supply unit Energy consumption: < 500 mWHousing material: POM black (polyoxymethylene) Viewing window material: PMMA (acrylic glass) Electrodes: Stainless steel 1.4571 Dimensions: Diameter 40 mm x 68 mm (Top) / 110 mm (Total) Gasket electrodes: EPDM Gasket housing: EPDM Application limits: Pressure max.: 6 bar; Temperature max.: 60 °C Protection class: IP 65* Display           Measuring range 3 LED green < 0.1 μS/cm 2 LED green < 0.5 μS/cm 1 LED green < 1.0 μS/cm 1 LED yellow < 5 μS/cm 1 LED red < 10 μS/cm 1 LED red flashing ≥ 10 μS/cm

Technical data: Measuring range: 0 - 10 μS/cm (without temperature compensation) <0.1 <0.5 < 1.0 < 5.0 < 10 μS/cm LED display: 3x green; 1x yellow; 1x red Power supply: 100-240 VAC plug-in power supply unit Energy consumption: < 500 mWHousing material: POM black (polyoxymethylene) Viewing window material: PMMA (acrylic glass) Electrodes: Stainless steel 1.4571 Dimensions: Diameter 40 mm x 68 mm (Top) / 110 mm (Total) Gasket electrodes: EPDM Gasket housing: EPDM Application limits: Pressure max.: 6 bar; Temperature max.: 60 °C Protection class: IP 65* Display           Measuring range 3 LED green < 0.1 μS/cm 2 LED green < 0.5 μS/cm 1 LED green < 1.0 μS/cm 1 LED yellow < 5 μS/cm 1 LED red < 10 μS/cm 1 LED red flashing ≥ 10 μS/cm

Technical data: Measuring range: 0 - 10 μS/cm (without temperature compensation) <0.1 <0.5 < 1.0 < 5.0 < 10 μS/cm LED display: 3x green; 1x yellow; 1x red Power supply: 100-240 VAC plug-in power supply unit Energy consumption: < 500 mWHousing material: POM black (polyoxymethylene) Viewing window material: PMMA (acrylic glass) Electrodes: Stainless steel 1.4571 Dimensions: Diameter 40 mm x 68 mm (Top) / 110 mm (Total) Gasket electrodes: EPDM Gasket housing: EPDM Application limits: Pressure max.: 6 bar; Temperature max.: 60 °C Protection class: IP 65* Display           Measuring range 3 LED green < 0.1 μS/cm 2 LED green < 0.5 μS/cm 1 LED green < 1.0 μS/cm 1 LED yellow < 5 μS/cm 1 LED red < 10 μS/cm 1 LED red flashing ≥ 10 μS/cm

Technical data: Measuring range: 0 - 10 μS/cm (without temperature compensation) <0.1 <0.5 < 1.0 < 5.0 < 10 μS/cm LED display: 3x green; 1x yellow; 1x red Power supply: 100-240 VAC plug-in power supply unit Energy consumption: < 500 mWHousing material: POM black (polyoxymethylene) Viewing window material: PMMA (acrylic glass) Electrodes: Stainless steel 1.4571 Dimensions: Diameter 40 mm x 68 mm (Top) / 110 mm (Total) Gasket electrodes: EPDM Gasket housing: EPDM Application limits: Pressure max.: 6 bar; Temperature max.: 60 °C Protection class: IP 65* Display           Measuring range 3 LED green < 0.1 μS/cm 2 LED green < 0.5 μS/cm 1 LED green < 1.0 μS/cm 1 LED yellow < 5 μS/cm 1 LED red < 10 μS/cm 1 LED red flashing ≥ 10 μS/cm

Technical data:Measuring Range: 0 - 20 uS/cm (without temperature compensation)<1,0 <5,0 < 10,0 < 20,0 > 20,0 uS/cmLED-Display: 3x green; 1x yellow; 1x redVoltage Supply: 100-240 VAC with wall plug transformerPower Consumption: < 500 mWHousing: POM black (Polyoxymethylen)Vision Panel: PMMA (Acryl Glass)Electrodes: Stainless Steel 1.4571Dimension: Diameter 40 mm x 68 mm (Top) / 110 mm (Total)Seals Electrodes EPDMSeal Housing: EPDMOperation Limits: P max: 6 bar; T max: 65 °CProtection Class: IP 65*Display            Measuring value3 LED green <= 1,0 uS/cm2 LED green < 5,0 uS/cm1 LED green < 10,0 uS/cm1 LED yellow < 20,0 uS/cm1 LED red flashing >= 20,0 uS/cm

Technical data:Measuring Range: 0 - 20 uS/cm (without temperature compensation)<1,0 <5,0 < 10,0 < 20,0 > 20,0 uS/cmLED-Display: 3x green; 1x yellow; 1x redVoltage Supply: 100-240 VAC with wall plug transformerPower Consumption: < 500 mWHousing: POM black (Polyoxymethylen)Vision Panel: PMMA (Acryl Glass)Electrodes: Stainless Steel 1.4571Dimension: Diameter 40 mm x 68 mm (Top) / 110 mm (Total)Seals Electrodes EPDMSeal Housing: EPDMOperation Limits: P max: 6 bar; T max: 65 °CProtection Class: IP 65*Display            Measuring value3 LED green <= 1,0 uS/cm2 LED green < 5,0 uS/cm1 LED green < 10,0 uS/cm1 LED yellow < 20,0 uS/cm1 LED red flashing >= 20,0 uS/cm

Technical data:Measuring Range: 0 - 20 uS/cm (without temperature compensation)<1,0 <5,0 < 10,0 < 20,0 > 20,0 uS/cmLED-Display: 3x green; 1x yellow; 1x redVoltage Supply: 100-240 VAC with wall plug transformerPower Consumption: < 500 mWHousing: POM black (Polyoxymethylen)Vision Panel: PMMA (Acryl Glass)Electrodes: Stainless Steel 1.4571Dimension: Diameter 40 mm x 68 mm (Top) / 110 mm (Total)Seals Electrodes EPDMSeal Housing: EPDMOperation Limits: P max: 6 bar; T max: 65 °CProtection Class: IP 65*Display            Measuring value3 LED green <= 1,0 uS/cm2 LED green < 5,0 uS/cm1 LED green < 10,0 uS/cm1 LED yellow < 20,0 uS/cm1 LED red flashing >= 20,0 uS/cm