LAB2B / TOGC2 Micro ozone generators
The LAB2B is a corona discharge type ozone generator with variable ozone output up to 10 g/h ozone in oxygen and 4 g/h ozone using dried air. The air-cooled ozone generator is enclosed in an compact desktop housing for bench use. ApplicationsResearch and development Education Laboratories Technology and how it worksThe Ozone generator LAB2B is built in a small desktop housing with air cooler, especially suited for laboratory application. The instrument consists of operation displays, flow meter for the feedgas and a controller for the variable power adjustment. The ozone output is adjustable via a rotary knob at the font side of the housing. The LAB2B can be operated with oxygen or dried air.Ozone is produced when oxygen containing gas is passed over the ceramic dielectric of an ozone generating module. The module is powered by a high voltage/high frequency power board.The ceramic dielectric is housed within a finned heat sink block which is air cooled by fan assisted atmospheric air. Technical features Variable ozone production up to 10 g/h Operating method: vacuum or pressure (10psi max.) Illuminating switches indicating ozone production and faults Ozone generating module cooling medium: ambient air (fan assisted) O&M manual including performance graphs Feedgas: oxygen or dried air Dimensions: (LxWxD): 230 mm x 300 mm x 160 mm Connections: PVDF compression fitting to suit 8 mm pipe / tube Flowmeter: 2-10 l/min Enclosure: 316 mild steel, epoxy-coated Ozone generating module: 316 stainless steel electrode assembly inside a ceramic dielectric tube Remote controls and signalsOzone ON-OFF: green illuminator switch Fault: red illuminator switch Power supply230 VAC, 50-60 Hz
The Ozone generator TOGC2 is based on the principle of „Silent Electrical Discharge” using oxygen or air as feedgas. The ozone production can be adjusted for a variable output: max. 10 g/h from oxygen and 4 g/h from dried air. The instrument is concepted for small industrial ozone application and pilot plants. Application examples Industrial oxidation processes Drinking water and Process water treatment Bottled water DisinfectionMain features Ozone generator producing a variable output up to 10g/hr Feed gas: oxygen or air Operate under vacuum or at maximum pressure of 10psig Air cooled ozone generating module Illuminating switches indicating ozone production and faults O&M manual including performance graphs in EnglishCompact dimensions Technology and how it works The Ozone generator TOGC2 is built in a small, wall-mounted housing with air cooler, especially suited for industrial application. The instrument consists of operation displays, flow meter for the feedgas and a controller for the variable power adjustment. The ozone output is adjustable via a rotary knob and externally by a 4-20 mA signal. Ozone is produced when oxygen containing gas is passed over the ceramic dielectric of an ozone generating module. The ceramic dielectric is housed within a finned heat sink block which is air cooled by fan assisted atmospheric air. Technical features Operating method: vacuum or pressure (10psi max.) Module cooling medium: ambient air (fan assisted) Connections: PVDF compression fitting to suit 8 mm pipe/tubeDimension (LxWxD): 330 mm x 150 mm x 250 mm Flowmeter: 2-10l/min Enclosure: 316 stainless steel, satin finished Module: 316 stainless steel electrode assembly inside a ceramic dielectric tube Remote controls and signalsOzone ON-OFF: green illuminator switch Fault: red illuminator switch Power supply230 VAC, 50-60HzOptions4-20mA external output control